Kegco Standard Double Faucet Tower Kegerator Kit - EBSTCK2-542-2_NT - No Tank - Kegco.com & Marketplace

$199.99

Dispense up to two kegs of delicious cold draft beer from your very own kegerator with Kegco's Standard Dual Keg Kegerator Conversion Kit! This kit comes with all of the high quality commercial-grade parts you'll need to successfully convert your refrigerator or freezer into a two product beer dispenser, including a pro series double gauge regulator for safe and easy CO2 management and a durable lever handle American D system Sankey coupler with an easy-to-use design. Putting the finishing touches on your new kegerator is a sleek 3" diameter double faucet chrome plated draft tower with two matching chrome plated faucets, which gives your kegerator a stylish look that is sure to impress your friends! This kit was designed to dispense 2 full size kegs, 2 pony kegs, 2 six gallon kegs, or any combination your choose, depending on your refrigerator's capacity.

Two Faucet Chrome Draft Beer Tower3" Diameter, Two Faucet Chrome Plated Draft Beer Tower:
Found on many commercial grade kegerators, this 3" diameter air-cooled draft beer tower is sure to look great on your own kegerator. It comes complete with two NSF Approved chrome plated metal faucets with brass levers and two black ABS plastic faucet knobs. Two 5' lengths of 3/16" I.D. beer line extend from the bottom of the tower.



Lever Handle Keg CouplersTwo Lever Handle D System Keg Couplers:
This NSF-approved commercial grade keg coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.


Pro Series Double Gauge RegulatorPro Series Double Gauge Regulator:
If you want a two product regulator with high end features but do not need to dispense your keg at different pressures, this pro series double gauge regulator with a y-splitter and two independent shut-off valves is perfect for you! It features a chrome plate brass body, two gauges to display PSI and Co2 volume, and a large, easy-to-use pressure adjustment knob. Also included are a manual pressure release valve and an integral tamper-proof safety relief valve that releases at 45-psi.



KEGCO STANDARD DOUBLE FAUCET TOWER KIT COMPONENTS

  • LH-542-2 - PRO SERIES DOUBLE GAUGE TWO PRODUCT CO2 REGULATOR
    If you want a two product regulator with high end features but do not need to dispense your keg at different pressures, this pro series double gauge regulator with a y-splitter and two independent shut-off valves is perfect for you! It features a chrome plate brass body, two gauges to display PSI and Co2 volume, and a large, easy-to-use pressure adjustment knob. Also included are a manual pressure release valve and an integral tamper-proof safety relief valve that releases at 45-psi.

  • 516BAL-5 - TWO 5 FOOT LENGTH OF 5/16 INCH I.D. BLUE AIR LINES
    Our brewery-approved thermoplastic vinyl beverage hose not only meets but exceeds all of the rigid demands for beer dispensing systems. The blue 5/16" I.D. beer line remains flexible and durable at recommended temperatures and pressures, is unaffected by normal cleaning compounds, and will not rot, swell, or dry out.

  • 516SNP - PLASTIC REUSABLE CLAMP FOR 5/16 INCH ID TUBING
    This easy-to-use white plastic snap clamp fits 5/16" I.D. (9/16" O.D.) vinyl hose. A tooth-locking mechanism allows you to tighten the clamp without using tools, and the semi-rigid plastic design is reusable and will not corrode over time.

  • KT85D-L - TWO D SYSTEM KEG TAPS - BLACK LEVER HANDLES
    This NSF-approved commercial grade keg coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.

  • D4743DT - CHROME PLATED METAL DUAL FAUCET DRAFT BEER TOWER - 3" COLUMN
    Found on many commercial grade kegerators, this 3" diameter air-cooled draft beer tower is sure to look great on your own kegerator. It comes complete with two NSF Approved chrome plated metal faucets with brass levers and two black ABS plastic faucet knobs. Two 5' lengths of 3/16" I.D. beer line extend from the bottom of the tower. The thermoplastic vinyl beer hose reliably meets all of the demands for beer dispensing systems. It remains flexible and durable at recommended temperatures and pressures, is unaffected by normal cleaning compounds, and will not rot, swell, or dry out.

  • FWSTD - STANDARD METAL BEER FAUCET WRENCH
    This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4" length.

SPECIAL INSTRUCTIONS:

  • When converting a compact refrigerator it is very important to know your internal dimensions of your refrigerator with the door shut to insure that this beer cooler conversion kit will work on your compact refrigerator or chest freezer. To fit a full size keg in a refrigerator, you will need a minimum of 28" Interior Height and 17" width and depth. For a pony keg you will need 18" Interior Height and 17" width and depth. Remember to measure the depth with the door closed. When measuring the Interior Height, be sure to measure from the top of the compressor step bottom shelf. All refrigerators have a compressor step that needs to be accounted for when measuring your interior height.
  • All additional technical questions can be handled by one of our friendly technical support staff by calling toll free 1-800-710-9939.

  • UPC: 608938596437
Key Features
MountTower
FaucetTwo Chrome-Plated Brass Beer Faucets
Keg CouplerTwo Kegco KT85D-L "D" System Keg Couplers
RegulatorKegco 542-2 Pro Series Dual Gauge Two Product CO2 Regulator
CO2 TankNot Included
Drip TrayNot Included
Cleaning KitNot Included
Faucet WrenchStandard Metal Beer Faucet Wrench

Kegco Standard Double Faucet Tower Kegerator Kit - EBSTCK2-542-2_NT - No Tank - Kegco.com & Marketplace Reviews

Average Customer Rating:
(0)
(based on 0 reviews) 
No customer reviews available. Be the first to write a review!
 
Shipping Calculator
Enter Your Shipping Zip Code:
Shipping Options
Please enter a zip code.
All charges are based on a quantity of 1.
Click "Add to Cart" above to change quantities
and make actual ship method selection.

 

Select Options

This product has multiple options. Please select options and then add to cart at the bottom of the page.

Item Qty Discount Price
Model: BF EBSTCK2-542-2_NT
Availability: In Stock
 $199.99
Select Upgrade Options
Optional CLEANING KIT!
No Cleaning Kit Added +$0.00
Economy Beer Line Cleaning Kit +$25.95
Beer Cleaning Kit - 1 Qt. Bottle w/ 4 oz. Cleaner +$49.95
Beer Cleaning Kit - 1 Qt. Bottle w/ 33 oz. Cleaner +$54.99
Beer Cleaning Kit - 2 Qt. Bottle w/ 4 oz. Cleaner +$59.95
Beer Cleaning Kit - 2 Qt. Bottle w/ 33 oz. Cleaner +$64.99
Complete D System Pressurized Cleaning Kit +$126.95
Deluxe Hand Pump Pressurized Keg Beer Cleaning Kit w/ 33 oz. Cleaner +$49.99

Optional CO2 TANK UPGRADE
No Co2 Tank Selected +$0.00
2.5 lb. Aluminum Co2 Tank +$55.99
5 lb. Aluminum Co2 Tank +$56.95
10 lb. Aluminum Co2 Tank +$84.99
15 lb. Aluminum Co2 Tank +$94.99
20 lb. Aluminum Co2 Tank +$114.99

Optional DRIP TRAY Upgrade
No Drip Tray Selected +$0.00
Add DP120 SS Surface Mount Tray (no Drain) +$39.95
Add DP120D SS Surface Mount Tray +$44.95
Add DP-220D SS Flush Mount Tray +$59.99
Add DP-220DBR Brass Flush Mount Tray +$175.00
Add DP-920D SS Cut Out Drip Tray +$164.99
Add DP-920DBR Brass Drip Tray +$239.99

Optional TEMPERATURE CONTROL UNIT
No Thermostat Control Unit +$0.00
Thermostat Control Unit - Mechanical +$57.00
Thermostat Control Unit - Digital +$69.95