Kegco ICK19S-2 Dual Faucet Javarator Cold-Brew Coffee Dispenser - Black/Stainless Steel - Kegco.com & Marketplace

Regular Price: $799.59
You Save $159.92 (20%)
$639.67

Introducing the all new Kegco ICK19S-2 Dual Faucet Javarator Cold-Brew Coffee Dispenser. Store, refrigerate and dispense two types of coffee at once, making it even more convenient - and more fun! - to enjoy your favorite chilled beverage. This iced coffee dispenser has stainless steel fittings and a stainless steel faucet to ensure a sanitary environment for your kegged coffee, and it sports a stainless steel door that will look great in your home. It includes all the parts necessary for dispensing two kegs of cold brewed coffee at once so you can experiment with different flavors and compare!

This Iced Coffee Kegerator includes a dual faucet draft tower with stainless steel faucets and fittings, two sets of ball lock keg couplers for cornelius home brew kegs, and a double gauge Nitrogen regulator. One 22 cu.ft. tank can pressurize up to fourteen 5-gallon kegs before needing to be refilled. The interior of the cabinet is large enough to hold up to two corny kegs at a time. Additional features include rolling casters which allow you to easily move the unit, a chrome guard rail that prevents glasses from sliding off the worktop and a built-in drip tray for easy cleanup. The nitrogen tank can easily fit inside the fridge, but it includes an external tank mount and a knockout for the air line if you'd like to manage the tank outside the fridge and have more room inside. What's more, this iced coffee keg dispenser converts to a refrigerator with two adjustable wire shelves so you can use it for extra storage when it's not storing cold brew coffee kegs.

  • MDK-199SS-01 Cabinet and Dual Faucet Cold Brew Coffee Dispense System
  • Black Cabinet with Stainless Steel Door
  • This Iced Coffee Keg Dispenser comes with a complete Direct Draw Kit for two Home Brew Coffee Kegs.
  • Includes a brand new aluminum 22 cu. fit. Nitrogen Tank
    This Tank is produced from high strength aluminum alloy 6061-T6. This is superior to a steel tank because it will not rust. The service pressure is up to 2216 PSI/153 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 580 Valves are CGA approved, and have a female thread for Nitrogen Regulators. Average fill good for up to fourteen 5-gallon kegs depending upon your fill. (5.5" diameter, 18.5" Height).
  • Includes a Commercial Grade Dual Gauge Nitrogen Regulator
    This commercial grade dual gauge regulator is compatible with nitrogen cylinders with CGA 580 valves and features a double gauge design that measures both PSI and the volume of nitrogen gas in the tank. The durable regulator body is constructed of forged brass with all brass connections and components, an integral safety pressure relief valve that releases at 45 PSI, and a shut-off valve that allows you to instantly shut off pressure to the keg. A large pressure adjustment knob makes it easy to adjust the pressure by hand without requiring a screwdriver.
  • Includes Two 5 foot lengths of 5/16 Inch I.D. Air Line Assembly with 2 Snap Clamps each
    The standard length is 5 feet of 5/16" I.D. Blue Air/Nitrogen Tubing made of Thermoplastic Vinyl Hose (Super Vinyl). This tubing will not rot, swell or dry out and is unaffected by normal cleaning compounds. This air line assembly comes with two Plastic Snap Clamps with a reusable clamp design.
  • Includes Two Sets of Ball Lock Home Brew Keg Couplers
    This set includes both a gas in and beer out coupler that works with a ball lock Cornelius pepsi kegs. The Gas in features a 1/4" thread for a flare fitting. This connector already has attached the special 1/4" nut that has a 5/16" hose barb attached. The couplers are made of food grade plastic which will not corrode. There is an option to upgrade to all stainless steel ball lock couplers.
  • Includes a 3" Diameter Double Faucet Stainless Steel Draft Tower
    The Tower is a commercial grade Single Column, Double Faucet, 3" Diameter, Stainless Steel Draft Tower with 100% Stainless Steel contact. The stainless steel contact is necessary for good sanitation. This tower comes complete with stainless steel faucets and two 5 foot lengths of 3/16 Inch I.D. Clear Tubing. This Tower is mounted using the gasket and four screws that are included. The faucets can be upgraded to Perlick faucets, which have less internal surface area to prevent the faucet knobs from sticking.
  • Measures at 33"H x 20"W x 25.5"D
  • Reversible Door
  • 2 full-width wire shelves and a hole plug to convert into a Compact Refrigerator
  • Removable Drip Tray with Grill to Collect spills
  • Chrome Guard Rail to Protect Your Mugs and Glasses from Sliding Off
  • Steel interior floor mat for long lasting durability and easy glide of kegs
  • Textured serving counter top
  • External tank mount with knockout for air line
  • 25% more energy efficient design saves you money each month!
  • UL Listed
  • Warranty: 1 year parts and labor / 5 years parts only on compressor and sealed system
    UPC: 700697200157
Dimensions
Height33"
Width20"
Depth25.5"
Warranty
Labor1 Year
Parts1 Year
Compressor (Parts Only)5 Years
Key Features
Built-in CapableNo
Security LockNo
Keg CouplerYes
RegulatorDual Gauge
CO2 Tank5 lb
Cleaning KitNot Included
Outdoor UseNo
Commercial UseNo
Keg Storage Capacities
Full Size / 1/2-BarrelHolds 1
Pony Size / 1/4-BarrelHolds 1
1/4-Barrel SlimHolds 1
1/6-BarrelHolds 2
5 gal. Ball/Pin Lock KegHolds 2
5-Liter / Mini KegHolds 2
Exterior
CabinetBlack Cabinet
Drip TrayYes
Guard RailYes
CastersYes
PDFInstruction Manual
PDFDispense Kit Assembly Manual
PDFParts Diagram
PDFEnergy Guide

Kegco ICK19S-2 Dual Faucet Javarator Cold-Brew Coffee Dispenser - Black/Stainless Steel - Kegco.com & Marketplace Reviews

Average Customer Rating:
(0)
(based on 0 reviews) 
No customer reviews available. Be the first to write a review!
 
Shipping Calculator
Enter Your Shipping Zip Code:
Shipping Options
Please enter a zip code.
All charges are based on a quantity of 1.
Click "Add to Cart" above to change quantities
and make actual ship method selection.

Labor - 12 Months

Parts - 12 Months

Compressor (Parts Only) - 60 Months