Introducing the ICK20B-1 Javarator Cold-Brew Coffee Dispenser from Kegco! This high quality keg tapper comes complete with everything you need to dispense cornelius kegs of iced coffee, giving you a fun new way to get your daily fix of your favorite beverage. Not only does it have all the necessary equipment to pour a cold, refreshing glass of coffee, but this Javarator can also easily be converted to a regular refrigerator with two adjustable storage shelves. It has a stainless steel interior floor plate which provides durability by displacing the weight of the keg evenly over the floor of the cabinet and allows you to slide the kegs in and out smoothly.
The Kegco ICK20B-1 is designed for home use so it is quiet and energy efficient. The sleek matte black finish complements any decor and does not show fingerprints like a shiny finish might, meaning less cleaning of the outside of the appliance is necessary. The easy roll casters make moving this unit from your bar to your patio a breeze and they lock to prevent the unit from rolling once you have it in position. The removable recessed drip tray with a plastic grill can easily be taken out and cleaned in the dishwasher. The attractive chrome safety rail helps to keep mugs and glasses from sliding off and installs with ease. This Iced Coffee Kegerator includes a draft tower with a stainless steel faucet and fittings to ensure a sanitary environment for your cold brewed coffee. Also included are a set of ball lock keg couplers for cornelius home brew kegs and a double gauge nitrogen regulator. One 22 cu. ft. nitrogen tank can pressurize up to fourteen 5-gallon kegs before needing to be refilled.
- MDK-209B-01 Cabinet and Single Faucet Cold Brew Coffee Dispense System
- Black Cabinet with a Matte Black Door
- This Iced Coffee Keg Dispenser comes with a complete Direct Draw Kit for Home Brew Coffee Kegs.
- Includes a brand new aluminum 22 cu. ft. Nitrogen Tank
This Tank is produced from high strength aluminum alloy 6061-T6. This is superior to a steel tank because it will not rust. The service pressure is up to 2216 PSI/153 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 580 Valves are CGA approved, and have a female thread for Nitrogen Regulators. Average fill good for up to fourteen 5-gallon kegs depending upon your fill. (5.5" diameter, 18.5" Height).
- Includes a Commercial Grade Dual Gauge Nitrogen Regulator
This commercial grade dual gauge regulator is compatible with nitrogen cylinders with CGA 580 valves and features a double gauge design that measures both PSI and the volume of nitrogen gas in the tank. The durable regulator body is constructed of forged brass with all brass connections and components, an integral safety pressure relief valve that releases at 45 PSI, and a shut-off valve that allows you to instantly shut off pressure to the keg. A large pressure adjustment knob makes it easy to adjust the pressure by hand without requiring a screwdriver.
- Includes 5 feet of 5/16 Inch I.D. Air Line Assembly with 2 Snap Clamps
The standard length is 5 feet of 5/16" I.D. Blue Air/Nitrogen Tubing made of Thermoplastic Vinyl Hose (Super Vinyl). This tubing will not rot, swell or dry out and is unaffected by normal cleaning compounds. This air line assembly comes with two Plastic Snap Clamps with a reusable clamp design.
- Includes Ball Lock Home Brew Keg Couplers
This set includes both a gas in and beer out coupler that works with a ball lock Cornelius pepsi kegs. The Gas in features a 1/4" thread for a flare fitting. This connector already has attached the special 1/4" nut that has a 5/16" hose barb attached. The couplers are made of food grade plastic which will not corrode. There is an option to upgrade to all stainless steel ball lock couplers.
- Includes a 3" Diameter Stainless Steel Draft Tower
The Tower is a commercial grade Single Column, Single Faucet, 3" Diameter, Stainless Steel Draft Tower with 100% Stainless Steel contact. The stainless steel contact is necessary for good sanitation. This tower comes complete with a stainless steel faucet and 5 Feet of 3/16 Inch I.D. Clear Tubing. This Tower is mounted using the gasket and four screws that are included. The faucet can be upgraded to a Perlick faucet, which has less internal surface area and prevents the faucet knob from sticking.
- Measures at 33"H x 23 11/16"W x 23 15/16"D
- 2 full-width wire shelves and a hole plug to convert into a Compact Refrigerator
- Built-in Drip Tray with Grill to Collect spills
- Chrome Guard Rail to Protect Your Mugs and Glasses from Sliding Off
- Stainless Steel interior floor mat for long lasting durability and easy glide of kegs
- Textured serving counter top
- 25% more energy efficient design saves you money each month!
- CSA Listed
- Warranty: 1 year parts and labor / 5 years parts only on compressor and sealed system
|Keg Coupler||Ball Lock|
|CO2 Tank||5 lb|
|Cleaning Kit||Not Included|
|Keg Storage Capacities
|Full Size / 1/2-Barrel||Holds 1|
|Pony Size / 1/4-Barrel||Holds 1|
|1/4-Barrel Slim||Holds 1|
|5 gal. Ball/Pin Lock Keg||Holds 3|
Kegco ICK20B-1 Javarator Cold-Brew Coffee Dispenser with Black Cabinet and Door - Kegco.com & Marketplace Reviews
|Average Customer Rating:|
|(based on 0 reviews)|| |
All charges are based on a quantity of 1.
Click "Add to Cart" above to change quantities
and make actual ship method selection.