Kegco's KOMC1S-3 Three Faucet Commercial Kombucha Keg Dispenser comes complete with a triple tap direct draw kit and everything you need to simultaneously dispense three kegs of delicious kombucha, the nutritional probiotic tea packed with compounds that support your digestive and immune systems, detoxify, energize, clarify your skin, prevent disease, and elevate your mood. Perfect for small restaurants and coffee shops that want to start dispensing kombucha on tap, it boasts a spacious interior that can accommodate up to four 5 gallon kegs with an external CO2 mount, allowing you to dispense three kegs while keeping a fourth frosty cold and ready to tap.
Blower Hose for Air-Cooled Tower
Keep the beer line cooled all the way up to the back of the faucet
An interior fan provides rapid cool down and ensures consistent temperatures
Quickly and accurately monitor the internal temperature at a glance
Knockout for external CO2 Tank or Drain Hose
This knockout allows you to mount your CO2 Tank outside the cabinet or direct the drip tray runoff to an external drain
Drip Tray Drain Receptacle
Any spills from the faucet can be directed into this bottle for quick and easy cleaning
Behind these walls lies foamed in place polyurethane insulation to maintain a specific steady temperature
Rubber Floor Mat
A rubber floor mat reduces the shock of heavy kegs on the stainless steel floor
For added convenience, 4" locking casters make this kombucha keg cooler easy to move, and the built-in drip tray and steel interior make clean-up fast and simple. A 1/7 hp compressor delivers powerful cooling while cool air is fan-forced into the tower to keep your kombucha ice cold all the way up to the faucets.
The kombucha dispenser comes with everything you need to tap three ball lock Cornelius kegs, including a three faucet tower with stainless steel faucets and fittings, three sets of ball lock keg couplers for use with Cornelius home brew kegs, a single gauge CO2 regulator with an air distributor, and an aluminum CO2 tank. One 5 lb. tank can pressurize up to fourteen 5 gallon kegs before needing to be refilled. The faucets are construction of durable and sanitary stainless steel, and the ball lock keg couplers are made of food grade plastic and have been designed to resist corrosion.
- Includes a brand new 5 lb. Aluminum CO2 Tank
This tank is produced from high strength aluminum alloy 6061-T6. This is superior to a steel tank because it will not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada Markings. The 320 valves are CGA approved, and have a male thread for CO2 regulators. An average fill is good for 13-14 kombucha kegs depending upon your fill. 5.5" diameter, 18.25" height.
- Includes Single Gauge CO2 Regulator with 3-Way Air Distributor
This regulator works with any CO2 tank with a CGA-320 valve. The single gauge measures PSI, indicating how much pressure is inside of the keg. Adjustable output pressure is 0-60 psi. Includes 3000 psig Max Primary Inlet, 60 psig Safety Relief Valve R82, female CGA-320 connection, and ball valve with 5/16" OD hose barb connection. Total ports include two primary 1/4" FNPT ports and two secondary 1/4" FNPT ports. This UL listed compressed gas regulator is for use with air, CO2, and inert gases.
- Includes three 5 foot length of 5/16" I.D. Air Line Assembly with 2 Snap Clamps each
Three standard 5 foot lengths of 5/16" I.D. Blue Air/Nitrogen tubing made of thermoplastic vinyl hose (Super Vinyl). This tubing will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. Each air line assembly comes with two plastic snap clamps with a reusable clamp design.
- Includes three sets of Ball Lock Home Brew Keg Couplers
Each set includes both a gas in and a beer out coupler that work with ball lock Cornelius Pepsi kegs. The gas in features a 1/4" thread for a flare fitting. This connector already has attached the special 1/4" nut that has a 5/16" hose barb attached. The couplers are made of food grade plastic which will not corrode. There is an option to upgrade to all stainless steel ball lock couplers.
- Includes a 3" diameter Triple Faucet Stainless Steel Draft Tower
The tower is a commercial grade single column, triple faucet, 3" diameter stainless steel draft tower with 100% stainless steel contact. The stainless steel contact is necessary for good sanitation. This tower comes complete with stainless steel faucets and three 5 foot lengths of 3/16" I.D. clear tubing. This tower is mounted using the gasket and four screws that are included. The faucets can be upgraded to Perlick faucets, which have less internal surface area to prevent faucet knobs from sticking.
- Keg Storage Capacities:
- One (1) Full Size / 1/2-Barrel (15.5 Gal.)
- One (1) Pony Size / 1/4-Barrel Short (7.75 Gal.)
- Two (2) 1/4-Barrel Slim (7.75 Gal.) or
- Four (4) 1/6-Barrel (5.23 Gal.)
- Maximum Ambient Temperature: 100 degrees Fahrenheit
- Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
- Continuous cold air channeled through tower to ensure cold product
- Heavy-duty stainless steel top
- Built-in drip tray with drain
- Stainless steel interior walls and ceiling
- Diamond plate floor in cabinet interior
- Magnetic gasket provides positive door sealing
- Self-closing door with lock
- Refrigeration system utilizes ozone friendly R134a refrigerant
- CFC-free foamed-in-place polyurethane insulation
- Knockout for remote nitrogen tank
- Stainless steel finish
- ETL and ETL Sanitation Listed for Commercial Use
Some configurations require external CO2 tank mount.
|Height||40" (top of guard rail)|
|Unit Weight||143 lbs.|
|Shipping Weight||187 lbs.|
|Compressor (Parts Only)||5 Years|
|Keg Coupler||Ball Lock|
|CO2 Tank||5 lb.|
|Cleaning Kit||Not Included|
|Keg Storage Capacities
|Full Size / 1/2-Barrel||1|
|Pony Size / 1/4-Barrel||1|
|1/6-Barrel||3 (4 with external CO2 tank)|
|5 gal. Ball/Pin Lock Keg||3 (4 with external CO2 tank)|
Three Tap Commercial Kombucharator Kombucha Keg Dispenser - Stainless Steel - Kegco.com & Marketplace Reviews
|Average Customer Rating:|
|(based on 0 reviews)|| |
All charges are based on a quantity of 1.
Click "Add to Cart" above to change quantities
and make actual ship method selection.