Are you tired of dispensing a single keg of beer from a difficult-to-use hand pumped party pump? Do you wish your remaining beer would stay fresh after the party, instead of becoming flat and undrinkable? Kegco's Two Keg Homebrew Party Kegerator Kit makes it easy to dispense not one, but two ball lock kegs full of delicious cold draft beer, making it the perfect party solution! Because this kit uses a CO2 driven dispense system, your keg will stay fresher for longer, allowing you to enjoy your beer long after the party is over. It does not use any towers or shanks and requires no installation - all you need is a refrigerator large enough to hold two ball lock homebrew kegs. Kegco kits use high quality commercial grade parts that have been designed and built to last, ensuring that your beer is in the best of hands.
Two Product Pro Series Double Gauge Regulator:
If you want a two product regulator with high end features but do not need to dispense your keg at different pressures, this pro series double gauge regulator with a y-splitter and two independent shut-off valves is perfect for you! It features a chrome plate brass body, two gauges to display PSI and Co2 volume, and a large, easy-to-use pressure adjustment knob. Also included are a manual pressure release valve and an integral tamper-proof safety relief valve that releases at 45-psi.
Two Complete Sets of Ball Lock Home Brew Keg Taps:
These complete ball lock home brew keg tap sets include both a gas in and beer out coupler for easy tapping of ball lock Cornelius Pepsi kegs. The gas in comes with a 1/4" nut and 5/16" hose barb already attached, allowing you to quickly connect it to the same size air line that standard draft beer regulators use. The beer out connector has a 3/16" hose barb that connects to standard 3/16" beer line.
Party Faucet Assembly:
This is a black plastic party pump squeeze faucet with five feet of black 3/16" I.D. beer line. This is the faucet you see installed on all picnic keg pumps. The beer line attaches to the hose nipple on the liquid out coupler and is held in place by a clamp.
2 Reconditioned Kegs:
Set of (2) - 5 Gallon Used Stainless Steel Ball Lock Soda Kegs. We have rinsed and pressure tested them to hold pressure, however, they are not new and should been cleaned and sanitized before use. New O-Ring Set Included!
TWO KEG HOMEBREW KEGERATOR CONVERSION KIT COMPONENTS
- Aluminum 5 lb Co2 Tank
All of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank and will not rust. These eye-catching tanks have a glossy red coating that acts as an extra layer of protection against corrosion and wear. Tanks are shipped empty and will need to be filled locally
- LH-542-2 - PRO SERIES DUAL GAUGE CO2 REGULATOR
Easily measure PSI and Co2 volume and adjust Co2 output pressure using this pro series dual gauge regulator packed with premium features! The chrome plated brass body has a large pressure adjustment knob for easy use, and includes both a manual pressure release valve and an integral tamper-proof safety pressure relief valve that releases at 45-psi.
- 516SNP - PLASTIC REUSABLE CLAMP FOR 5/16" ID TUBING
This easy-to-use white plastic snap clamp fits 5/16" I.D. (9/16" O.D.) vinyl hose. A tooth-locking mechanism allows you to tighten the clamp without using tools, and the semi-rigid plastic design is reusable and will not corrode over time.
- 516BAL-5 -TWO 5 FOOT LENGTH 5/16 INCH I.D. BLUE AIR LINES
Our brewery-approved thermoplastic vinyl beverage hose not only meets but exceeds all of the rigid demands for beer dispensing systems. The blue 5/16" I.D. beer line remains flexible and durable at recommended temperatures and pressures, is unaffected by normal cleaning compounds, and will not rot, swell, or dry out.
- TWO PICNIC FAUCETS WITH ATTACHED 5' BLACK BEER LINES
Two black plastic party pump squeeze faucets with five feet of black 3/16" I.D. beer line each. These are the faucets you see installed on all picnic keg pumps.
- TWO RECONDITIONED KEGS
Set of (2) - 5 Gallon Used Stainless Steel Pin Lock Soda Kegs. We have rinsed and pressure tested them to hold pressure, however, they are not new should been cleaned and sanitized before use. New O-Ring Set Included!
- TWO SETS OF BALL LOCK COUPLERS
This complete ball lock home brew keg tap set includes both a gas in and beer out coupler for easy tapping of ball lock Cornelius Pepsi kegs. The gas in comes with a 1/4" nut and 5/16" hose barb already attached, allowing you to quickly connect it to the same size air line that standard draft beer regulators use. The beer out connector has a 3/16" hose barb that connects to standard 3/16" beer line.
- Some gas suppliers will not fill a CO2 tank, they will only exchange your CO2 tank for a full one. If you are unsure where to get a tank filled in your area, you can try asking a local beer distributor or doing a local search for fire extinguishers and fire safety equipment. Companies that refill fire extinguishers are generally willing to fill a CO2 cylinder.
- All additional technical questions can be handled by one of our friendly technical support staff. Give us a call for more info.
Two Keg Homebrew Party Kegerator Kit - Ball Lock w/ 5lb Tank 2SHPCK-BALL5T - Wayfair Reviews
|Average Customer Rating:|
|(based on 0 reviews)|| |
All charges are based on a quantity of 1.
Click "Add to Cart" above to change quantities
and make actual ship method selection.