Kegco K199B-1 Kegerators are 1-Tap Beer Keg Coolers that are set up to tap most D System Domestic American Beer Kegs. It comes complete with a D System Direct Draw Kit, which features a metal lever-handle keg coupler that is compatible with most beers kegged in the United States, Mexico, and Canada. The Direct Draw System also includes a 5 lb. CO2 cylinder, a premium single gauge regulator, a chrome plated metal draft beer tower, and all of the hoses and fittings necessary to dispense a cold draft beer. The lightweight 5 lb. Aluminum CO2 Tank is shipped empty and does not come filled. When full, the 5 lb. tank is good for approximately five-six full size kegs. The Single Gauge Regulator measures Pounds Per Square Inch (PSI), features a Safety Blow Off at 55-65 PSI, and comes with a flow control inlet nipple filter as well as a permanent Quad-Ring Inlet Seal.
The K199B-1 Keg Beer Refrigerator also comes with two removable wire shelves that allow it to be converted into an All-Refrigerator or Beverage Center, making it a very versatile keg beer cooler. 2-1/2" Casters are provided for mobility, allowing you to easily move your beer fridge from the kitchen to the patio. The elegantly designed all-black cabinet has a field-reversible door, textured serving top, and metal safety rail that prevent your beer mugs from sliding off. Inside, it has a stainless steel floor plate that distributes the weight of the keg evenly and allows it to slide in and out without harming the plastic interior liner.
These Kegerators can hold a Full Size, Quarter Slim, or Straight Pony Keg, or up to two Sixth Slims, Rubber Homebrew Kegs, or Strap Handle Kegs. Please Note: They will not fit Bevel or Rubber Kegs, which are commonly used by Coors and Miller Brewing Companies. Those kegs are wider in the middle than at the top or bottom.
- K199B-1 Beer Keg Refrigerators with One-Tap Dispensing System
- Black Cabinet with Black Door
- Removable Driptray with Grill to collect your spills
- Chrome Guard Rail keeps your glass and mugs from sliding off
- Textured serving counter-top
- Stainless Steel Interior Floor Mat provides long-lasting durability and makes beer kegs easier to move
- Reversible door
- Includes two full width wire shelves and a hole plug that allows you to convert the keg fridge into an all-fridge
- Save money each month with a design that's 25% more energy efficient
- UL Listed
This beer dispenser comes complete with a D System Beer Keg Direct Draw System. It includes all of the commercial grade components needed to tap a domestic keg:
- Chrome-Plated 3" Diameter Metal Draft Beer Tower
A commercial-grade 3" Diameter Single-Column Chrome-Plated Metal Draft Tower with a Single Chrome-Plated Faucet with Brass Lever. It also includes 5 feet of 3/16 Inch I.D. Clear Beer Tubing that ends in a Nozzle & Hex Nut Assembly that connects to all standard keg couplers. This Tower is mounted using the included gasket and four screws.
- Beer Faucet - Chrome with Brass Lever
This premium quality draft beer faucet has a forged brass body and a highly polished chrome finish. It has a brass shaft assembly and lever and a nylon ball washer to ensure smooth operation. The lever has standard threading that makes it compatible with most branded tap handles.
- D System Keg Coupler with Lever-Handle (Can Tap All Domestic Kegs)
This Commercial Grade Keg Tap works with all American "D" System Sankey Kegs, making the K199B-1 compatible with all domestic brand kegs. It features a nickel plated forged brass body and a 55 psi pressure relief valve. When you're ready to tap your keg, just pull out and then down on the lever to properly couple the keg.
- 5/16 Inch I.D. Blue Air Line Assembly - 5 feet with 2 Snap Clamps
This 5/16" I.D. Blue Air Line/Co2 Tubing is a standard length of 5 feet, and comes with two plastic snap clamps that have a reusable clamp design. The tubing is made of Themoplastic Vinyl Hose (Super Vinyl), which will not rot, swell, or dry out and is not affected by normal cleaning compounds.
- Single Gauge Co2 Regulator
Compatible with any Co2 Cylinder that has a CGA-320 valve. Single gauge measures PSI to indicate how much Co2 pressure there is inside of the beer keg. The adjustable output pressure is 0-60 psi. 3000 psig Max Primary Inlet. 60 psig Safety Relief Valve R82. Female CGA-320 connection. Ball valve outlet w/ 5/16" OD Hose Barb connection. Total ports = (2) Primary 1/4" FNPT ports, (2) Secondary 1/4" FNPT ports. This UL Listed Compressed Gas Regulator is for use with Air, Co2, and Inert Gases.
- New aluminum 5lb CO2 Cylinder
Produced from high-strength aluminum alloy 6061-T6, these Co2 cylinders are superior to steel tanks because they are not as heavy and will not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. Each tank has been stamped with the required U.S. Department of Transportation and Transport Canada markings. The CGA approved 320 Valves have a male thread for Co2 Regulators. Depending on your fill, the average fill is good for 5 to 6 kegs. This cylinder has a 18.25" height and a 5.5" diameter.
|Compressor (Parts Only)||5 Years|
|Keg Coupler||Kegco KT85D-L "D" System Keg Coupler|
|Regulator||Kegco 541 Pro Series Single Gauge Regulator|
|CO2 Tank||5 lb. Aluminum CO2 Tank|
|Keg Storage Capacities
|Full Size / 1/2-Barrel||Holds 1|
|Pony Size / 1/4-Barrel||Holds 1|
|5-Liter / Mini Keg||Holds 2|
Kegco K199B-1 Full-Size 1-Faucet Kegerators Black Door - D System - Kegco.com & Marketplace Reviews
|Average Customer Rating:|
|(based on 0 reviews)|| |
All charges are based on a quantity of 1.
Click "Add to Cart" above to change quantities
and make actual ship method selection.