This Kegco Tower Mount Homebrew Kegerator Kit comes with beer parts you will need to successfully convert your refrigerator into a draft beer dispenser. All the draft beer parts are of the highest commercial grade quality which are designed and built to last.
Our kegerator conversion kits come complete with detailed instructions and are supported by our friendly and experienced product specialists. You can count on them for personalized attention both before and after your purchase. All additional technical questions can be handled by one of our friendly technical support staff by calling toll free 1-800-710-9939.
Please Note: Beverage Factory is the only Authorized Reseller of Kegco products. Products purchased outside of Beverage Factory are not genuine Kegco parts and will not be covered under Kegco's 1-year warranty.
TOWER MOUNT HOMEBREW KEGERATOR CONVERSION KIT COMPONENTS
- Includes New Kegco 5 Lb Aluminum Co2 Tank
All of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank and will not rust. These tanks are popular because they are not as heavy as steel tanks and do not rust. 5.5" diameter, 18.25" height, 1800 psi, CGA-320 valve. Good for 5-7 Kegs.
- Reconditioned 5 Gallon Ball Lock Homebrew Keg Used
These used 5 gallon soda kegs are perfect for dispensing your own home brewed beer, soda, or cider. Made of all stainless steel, they are great for any sanitary liquid storage and dispensing needs. All our 5 gallon kegs are in used condition. We have cleaned them and pressure tested them to hold pressure, however, they are not new, and as such, they will have dings, dents, scrapes and may even still smell a little like soda. You should definitely give these tanks a good cleaning and sanitizing before using them. While they are guaranteed to hold pressure, you may still need to or want to replace gaskets, poppets, etc. You can purchase replacement parts and gaskets separately.
- Includes a 3" Diameter Polished Stainless Steel Tower
The tower is a high quality, commercial grade Single Column, Single Faucet, 3" Diameter, Polished Stainless Steel Draft Tower. This Tower comes complete with a Chrome Plated Faucet with Brass Lever and 5 Feet of 3/16 Inch I.D. Clear Beer Tubing that ends in a Nozzle & Hex Nut Assembly that connects to all standard keg couplers. This Tower is mounted using the gasket and four screws that are included.
- Includes Kegco Premium Pro Series Double Gauge Co2 Regulator
This Kegco premium pro series double gauge regulator is built with high end features! The premium pro series regulator works with any Co2 Tank with a CGA-320 valve and measures PSI, as well as the volume of the Co2 gas in the Cylinder. The second gauge indicates how much Co2 is left in the cylinder and when it should be refilled. The large turn knob in the center is used to easily adjust the output pressure. The premium pro series double gauge Co2 regulator has a chrome plated brass body. This regulator also features a manual pressure release valve. It has a built-on Co2 splitter and two shut-off valves, allowing you to run your air lines directly to each keg coupler.
- Includes 5 feet of 5/16 Inch I.D. Draft Air Line Assembly with 2 Snap Clamps
The standard length is 5 feet of 5/16" I.D. Blue Air/Co2 Tubing made of Themoplastic Vinyl Hose (Super Vinyl). This tubing will not rot, swell or dry out and is unaffected by normal cleaning compounds. This air line assembly comes with two Plastic Snap Clamps with a reusable clamp design.
- Includes Set of Ball Lock Home Brew Keg Connectors for Ball Lock Kegs
This is a set of Ball Lock Home Brew Keg Connectors. This set includes both a gas in and beer out coupler that works with a ball lock Cornelius pepsi kegs. The Gas in features a 1/4" thread for a flare fitting. This connector already has attached the special 1/4" nut that has a 5/16" hose barb attached. The larger hose barb makes it connect to the same size air line that standard draft beer regulators use. The Beer out connector has a 3/16" hose barb that connects to standard 3/16" beer line.
- Includes Chrome Beer Faucet with Brass Lever
This premium quality faucet features a forged brass body with a highly polished chrome finish. This faucet has a brass shaft assembly and lever with a nylon ball washer that ensures smooth operation. The brass lever has standard threading that is compatible with most branded tap handles.
- Comes with black ABS plastic Faucet Knob.
- Extra Set of New O-Rings for Ball Lock Keg
- Heavy Duty Specialty Faucet Wrench
This specialty faucet is used to connect the shank to the faucet. To properly tighten the faucet to the shank without leakage, requires this wrench that hooks into the holes on tightening colar. This faucet wrench is needed to remove faucet for cleaning or if you are switching to a stout faucet.
- Detailed Instruction/Installation Manual.
- All additional technical questions can be handled by one of our friendly technical support staff by calling toll free 1-800-710-9939.
Kegco One Keg Tower Homebrew Kegerator Kit Ball Lock w/ Tank - SHTCKBALLKEG5T - Kegco.com & Marketplace Reviews
|Average Customer Rating:|
|(based on 0 reviews)|| |
All charges are based on a quantity of 1.
Click "Add to Cart" above to change quantities
and make actual ship method selection.