Kombucharator with Black Cabinet and Stainless Steel Door - Marketplace

Regular Price: $707.44
You Save $141.49 (20%)

With Kegco's KOM19S-1 Kombucha Cooler, you can store, refrigerate and dispense delicious fermented tea packed with compounds that support your digestive and immune systems, detoxify, energize, clarify your skin, prevent disease, and elevate your mood! Our kombucharator has been specially designed with stainless steel fittings and a stainless steel faucet, ensuring a sanitary environment for the live cultures found in kombucha. This unit comes with all of the parts you'll need to dispense 'buch' from a keg, making it the perfect compliment to your kombucha brewing experience.

Home Brew Setup.

Our kombucha coolers come complete with a dispense system that includes a stainless steel draft tower, faucet, and fittings, a set of ball lock keg couplers for Cornelius home-brew kegs, a commercial-grade dual gauge CO2 regulator, and a 5 lb. aluminum CO2 tank with glossy red finish. The CO2 tank ships empty and can pressurize up to fourteen 5 gallon kegs once filled. The sleek black cabinet features an attractive stainless steel door that will look great with any decor, and has a large enough interior to accommodate up to two corny kegs at the same time. Other convenient features include a built-in drip tray for easy clean-up, a chrome guard rail that helps prevent glasses from sliding off of the countertop, and rolling casters that make it easy to move the unit from place to place. The CO2 tank fits easily inside of the fridge, but if you'd prefer to manage the tank outside of the unit to maximize your storage space, we've included an external tank mount and a knockout for the air line.

  • Kegco KOM19S-1 Kombucharator with Single Faucet Kombucha Dispense System
  • Black cabinet with stainless steel door
  • These kombucha keg dispensers come with a complete direct draw kit for home brew Kombucha kegs
  • Includes a brand new 5 lb. Aluminum CO2 Tank with Red Finish
    This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. It features an eye-catching glossy red coating that acts as an extra layer of protection against corrosion and wear. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators. An average fill is good for about 14 Cornelius ball lock home-brew kegs depending upon your fill.
  • Includes NSF Commercial Grade Double Gauge CO2 Regulator
    This regulator works with any CO2 tank with a CGA-320 valve. The top gauge measures PSI, indicating how much CO2 pressure is inside of the keg. The side gauge measures the remaining volume of CO2 in the tank, so you'll know when it's about time to get the tank filled. This regulator features a T-style adjustment valve that can be adjusted by hand, eliminating the need for a screwdriver.
  • Includes 5 feet of 5/16 Inch I.D. Air Line Assembly with 2 Snap Clamps
    The standard length is 5 feet of 5/16" I.D. Blue Air/CO2 Tubing made of Thermoplastic Vinyl Hose (Super Vinyl). This tubing will not rot, swell or dry out and is unaffected by normal cleaning compounds. This air line assembly comes with two plastic snap clamps with a reusable clamp design.
  • Includes Ball Lock Home Brew Keg Tap Complete Set
    This complete ball lock home brew keg tap set includes both a gas in and beer out coupler for easy tapping of ball lock Cornelius Pepsi kegs. The gas in has a 1/4" nut and 5/16" hose barb already attached for easy connection to the air line. The beer out connector has a 3/16" hose barb that connects to the 3/16" beer line.
  • Includes a 3" Diameter Polished Stainless Steel Draft Tower
    This NSF-approved tower is a 3" diameter single column, single faucet polished stainless steel draft tower with 100% stainless steel contact. The stainless steel contact is necessary for good sanitation when dealing with the live cultures present in kombucha. This tower comes complete with a stainless steel faucet and 5 feet of 3/16 inch I.D. clear tubing. The tower can be easily mounted using the gasket and four screws that are included.
  • Maximum Ambient Temperature: 100 degrees Fahrenheit
  • Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
  • Measures 33"H x 20"W x 25.5"D
  • Reversible door
  • Includes two full-width wire shelves and a hole plug to convert into a compact refrigerator
  • Removable drip tray with grill collects spills
  • Chrome guard rail helps prevent your mugs and glasses from sliding off
  • Steel interior floor mat ensures long lasting durability and easy glide of kegs
  • Textured serving counter top
  • External tank mount with knockout for air line
  • 25% more energy efficient design saves you money each month!
  • UL listed
  • Warranty: 1 year parts and labor, 5 years parts only on compressor and sealed system

UPC: 608729692799
Labor1 Year
Parts1 Year
Compressor (Parts Only)5 Years
Key Features
Built-in CapableNo
Security LockNo
Keg CouplerBall Lock Keg Couplers
RegulatorKegco 762 Commercial-Grade Dual Gauge Regulator
CO2 Tank5 lb. Aluminum Tank with Red Finish
Cleaning KitNot Included
Outdoor UseNo
Commercial UseNo
Keg Storage Capacities
Full Size / 1/2-Barrel1
Pony Size / 1/4-Barrel1
1/4-Barrel Slim1
5 gal. Ball/Pin Lock Keg2
Drip TrayYes
Guard RailYes
PDFInstruction Manual
PDFDispense System Assembly Manual
PDFParts Diagram
PDFEnergy Guide

Kombucharator with Black Cabinet and Stainless Steel Door - Marketplace Reviews

Average Customer Rating:
(based on 0 reviews) 
No customer reviews available. Be the first to write a review!
Shipping Calculator
Enter Your Shipping Zip Code:
Shipping Options
Please enter a zip code.
All charges are based on a quantity of 1.
Click "Add to Cart" above to change quantities
and make actual ship method selection.

Labor - 12 Months

Parts - 12 Months

Compressor (Parts Only) - 60 Months