These 5 Gallon Coffee Kegs (aka Pepsi Kegs or Cornelius Kegs) are constructed of durable and sanitary stainless steel and have a permanently molded rubber bottom skirt and a durable stainless steel strap handle. Stainless Steel is perfect for the storage and dispense of cold brewed iced coffee because it has a smooth inert surface that does not harbor foreign bacteria, can withstand the acidity of the brew and is easy to clean. The ball-lock fittings are easy to access making cleaning very easy. These ball lock kegs meet NSDA voluntary standards and are NSF approved (National Sanitation Foundation). The stainless steel lid fastens tightly to the body and has a pull ring style pressure release valve to easily depressurize the keg. Working pressure must not exceed 130 P.S.I.G.
Tanks is carried out by assembling : upper part (handle top), lower part (rubber bottom) and shell (calendared ferrule). The assembling of the different metallic parts is made by round and longitudinal welding. All welding on the tank are automatically made, following TIG system in a inert atmosphere without any deposit of material. On top of the tank, there is an oval opening (mouth) which allow the closing of the tank by the lid. On the bottom there is a sump to enhance the draining off. Printed on the stainless steel of the external surface of the body, there are information about the capacity of the tank, its identification numbers and the manufacturer. The lid is made of stainless steel, is finished with handle, and has a pull ring relief valve.
The tank model "NC" is made of AISI type 304 stainless steel (1.4301) with No. 2B mill finish steel sheet which fulfils ASTM A240 specification. All inside surfaces are smooth to prevent any possible dirt or contamination from foreign bacteria remaining inside after washing and sterilizing. Stainless steel does not react to magnetic attraction and it's color does not change due to cleaning or sterilizing. The top and the bottom are deep-drowned beginning from a stainless steel disk with a thickness of 1mm before the pressing. The body has a thickness of 0,70 mm.
To allow quick disconnect with the cold brewed coffee serving system, on its upper part the tank is equipped with one liquid plug and one gas plug. The gas plug has an incision on the hexagon and the liquid plug does not have an incision on the hexagon. They are both clearly marked by a stencil.
On the top part of the tank there are two welded stems, trough which the gas tube and the liquid tube are putted inside the tank, and top which the plugs are fixed.
The bottom of the tank is covered with black hot vulcanised natural rubber bonded onto the steel. One stainless steel handle on the top offers easy handling. Four openings in the bottom skirt enhance the drain of water when the keg is upside down. The maximum outside diameter of the rubber part is larger than the one of the body. In this way any damage by impact is minimized and the keg can be rolled.