The Kegco ICK30B-1 Digital Javarator adds digital functionality and a wider available temperature range to your cold-brew coffee dispense systems. Now you have the ability to see your specific temperature setting and set it easily with the push of a button, in addition to having a wider available temperature range for more precise temperature control. This Javarator comes complete with everything you need to dispense cornelius kegs of iced coffee, making it even more convenient - and more fun! - to store, refrigerate, and dispense a refreshing glass of chilled coffee.
- Digital Temperature Control:
With it's digital temperature display and push button control, it's never been easier to set and verify the internal temperature of a cold brew coffee dispenser. You no longer have to guess what temperature a number on a dial will produce. Simply press the up or down button to adjust the temperature by one degree. The display can be set to either Fahrenheit or Celsius.
- Fan-Forced Cooling for Super Cool Temperatures:
The ICK30 has Fan-Forced cooling, giving it the coldest temperature range of any coffee keg cooler on the market today. The fan helps provide even cooling throughout the unit. Temperature can be set as low as 32 degrees to dispense ice cold coffee.
- Large Interior:
The interior is spacious enough to easily hold up to two 5 Gallon D System kegs or up to three 5 Gallon Cornelius Ball Lock Home Brew Coffee Kegs, allowing you to store or dispense more than one variety of cold-brewed coffee at a time.
- Deep Chill Function:
The Deep Chill function allows you to quickly cool down a warm keg by forcing the compressor to work continuously for 24 hours. When your keg has reached the desired temperature, press Deep Chill again to return to normal operation.*
- Converts to a Refrigerator with 2 Shelves:
This Javarator does more than just dispense delicious coffee... it also easily converts to a refrigerator for extra storage! It comes with 2 adjustable shelves, allowing you to space them far enough apart to hold 2-liter bottles or gallon jugs. With the wide temperature range available in the ICK30, you can even use it to store wine!
- Locking Casters Provide Mobility:
Easily move the Kegco ICK30 from the kitchen to the patio for that backyard BBQ! Easy-Roll Casters allow you to move the Javarator from one location to another, and they lock so that once it's in position, so that it won't roll again until you want it to.
The Kegco ICK30B-1 is designed for home use, so it is quiet and energy efficient. The removable recessed drip tray with a plastic grill can easily be taken out and cleaned in the dishwasher. The attractive chrome safety rail helps to keep mugs and glasses from sliding off, and installs with ease. This Iced Coffee Kegerator includes a draft tower with a stainless steel faucet and fittings to ensure a sanitary environment for your cold brewed coffee. Also included are a set of ball lock keg couplers for cornelius home brew kegs, and single gauge CO2 regulator with an adapter to connect to the included Nitrogen Tank. One 22 cu. ft. tank can pressurize up to fourteen 5-gallon kegs before needing to be refilled.
Although everything necessary to tap a ball lock cornelius keg is included, the ICK30B-1 is customizable with many different features. The standard faucet is made of durable and sanitary stainless steel, but we provide the option of upgrading to a Perlick faucet which has less internal surface area and prevents a sticky faucet knob. The included ball lock keg couplers are food grade plastic and are designed to prevent corrosion, but we also have the option to upgrade to stainless steel ball lock couplers. Take a look at the available options below for a truly custom setup and feel free to give us a call at 1-800-710-9939 option 1 with any questions regarding the dispense system.
* - Letting the Deep Chill function run for the full 24 hours may result in freezing of the keg.
- MDK-309B-01 Cabinet and Single Faucet Cold Brew Coffee Dispense System
- Includes a brand new 22 cu. ft. Aluminum Nitrogen Tank
This Tank is produced from high strength aluminum alloy 6061-T6. This is superior to a steel tank because it will not rust. The service pressure is up to 2216 PSI/153 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 580 Valves are CGA approved, and have a female thread for Nitrogen Regulators. We have included a CO2 regulator to nitrogen tank adapter. Average fill good for up to fourteen 5-gallon kegs depending upon your fill. (5.5" diameter, 18.5" Height).
- Includes Single Gauge CO2 Regulator
This Regulator works with any CO2 Tank with a CGA-320 valve and an adapter is provided for use with a nitrogen tank. The single gauge measures PSI indicating how much pressure is inside the keg. Adjustable output pressure 0-60 psi. 3000 psig Max Primary Inlet. 60 psig Safety Relief Valve R82. Female CGA-320 connection. Ball valve outlet w/ 5/16" OD Hose Barb connection. Total ports = (2) Primary 1/4" FNPT ports, (2) Secondary 1/4" FNPT ports. UL Listed, Compressed Gas Regulator - for use w/ Air, Co2 and Inert Gases.
- Includes 5 feet of 5/16 Inch I.D. Blue Air Line Assembly with 2 Snap Clamps
The standard length is 5 feet of 5/16" I.D. Blue Air/Nitrogen Tubing made of Thermoplastic Vinyl Hose (Super Vinyl). This tubing will not rot, swell or dry out and is unaffected by normal cleaning compounds. This air line assembly comes with two Plastic Snap Clamps with a reusable clamp design.
- Includes Ball Lock Home Brew Keg Couplers
This set includes both a gas in and beer out coupler that works with a ball lock Cornelius pepsi kegs. The Gas in features a 1/4" thread for a flare fitting. This connector already has attached the special 1/4" nut that has a 5/16" hose barb attached. The couplers are made of food grade plastic which will not corrode. There is an option to upgrade to all stainless steel ball lock couplers.
- Includes a 3" Diameter Stainless Steel Draft Tower
The Tower is a commercial grade Single Column, Single Faucet, 3" Diameter, Stainless Steel Draft Tower with 100% Stainless Steel contact. The stainless steel contact is necessary for good sanitation. This tower comes complete with a stainless steel faucet and 5 Feet of 3/16 Inch I.D. Clear Tubing. This Tower is mounted using the gasket and four screws that are included. The faucet can be upgraded to a Perlick faucet, which has less internal surface area and prevents the faucet knob from sticking.
- Includes CO2 to Nitrogen Tank Adapter
This adapter connects the CO2 regulator to a nitrogen tank valve, allowing you to use the direct draw setup to dispense cold-brewed coffee from a keg.
- All dispensing accessories are UL recognized components
- Converts to refrigerator 2 full-width wire shelves
- Matte black cabinet and door
- Digital temperature control keeps temperature in range of 32°F-75°F
- Deep Chill function to quickly cool down warm keg
- Easy roll casters for mobility
- Removable built-in drip tray with grill to collect spills
- Chrome guard rail to protect your mugs and glasses from sliding off
- Stainless steel interior floor mat for long lasting durability and easy glide of beer keg
- Plugs into standard home outlet
- 25% more energy efficient design saves you money each month!
- UL Listed
- 1 year parts and labor warranty, 5 years parts only warranty on compressor and sealed system
Kegco ICK30B-1 Digital Javarator Cold-Brew Coffee Dispenser - Black Cabinet with Matte Black Door Reviews
|Average Customer Rating:|
|(based on 0 reviews)|| |
All charges are based on a quantity of 1.
Click "Add to Cart" above to change quantities
and make actual ship method selection.