Perlick Lo-Boy Low Profile D System Keg Tap Coupler w/ Pressure Relief

This is a low profile coupler for applications where space is a problem. This high quality low profile keg coupler (keg tap) is compatible with all domestic brand kegs. This coupler works with all American "D" system sankey kegs. This coupler features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg all you have to do is push down and turn to properly couple the keg.

System: D
Low Profile Design for Tight Clearance Installations
Chrome Plated Brass Body
Chrome Plated Probe
3/16" I.D. Beer Output Barb
5/16" I.D. Gas Input Barb
Height: 2 1/8"

Important information regarding Prop. 65 for CA residents.

Perlick Lo-Boy Low Profile D System Keg Tap Coupler w/ Pressure Relief Reviews

Average Customer Rating:	(4.5)
(based on 5 reviews)

	I prefer these lo boy coupler
by:	Douglas (05-29-2013) Macomb OK
Comments:	I like these better than any other coupler due to the simplicity of it and compact size even if I dont need the low bo in that situation
Bottom Line:	I would recommend this product.

	A better coupler
by:	Bill (05-23-2013) Escondido,Ca.
Comments:	Much easier to operate and less moving parts.Forget the others.
Bottom Line:	I would recommend this product.

	jcmcc123
by:	john (05-21-2013) ny
Comments:	great
Bottom Line:	I would recommend this product.

	Buy It
by:	wmw38 (01-25-2010) Brighton, MI
Comments:	Works like a champ, simple to use. Glad I read another review about beer and gas lines getting twisted, I replaced both before installing new coupler and added a bit of length to compensate. Can see where shorter lines might tangle, esp if kegs get changed out often, but we only go thru a keg every 6-8 weeks. Bottom line: buy it.
Bottom Line:	I would recommend this product.

	Great AND bad
by:	Geoff (11-05-2009) Atlanta
Comments:	* The first time you tap you will be confused because it doesn't seem possible that it is as easy as it is. However, because the input and outlet are in a straight line it is tough to spin it around without rotating your lines a lot (to avoid loops in the beer line). * My one major qualm is that there is no nipple or gas line ball to keep beer from flowing up the beer lines until you turn on the pressure. Make sure you use clear beer lines for this reason. The pressure release works well. Three stars because it is very low profile (often lower than a rubberized key handle) and easy sealing, but it lost pts because of the tangle it makes with your lines and the gas line backflow issue. I'm deciding whether to buy another because I like the all-metal construction, or go with the lowpro right-angle model at BevFact.
Bottom Line:	I would recommend this product.