DP-1608 - Stainless Steel Rinser Drain Drip Tray - 47-1/4" Wide for 6-10 Faucets

The new standard in integrated bar design combines the draft tower mounted to a platform tray. A seamless stainless steel platform tray offers improved hygiene and efficiency at the point of dispense. The tray is constructed of heavy gauge stainless steel with a durable metal rinser. This Polished stainless steel rinser tray has a built-in glass rinser. Add some dispense excitement to each glass by simply inverting the beer glass and pushing down on the built-in sprayer. Cold water is rinsed over the inside of the glass! A wetted glass makes pouring the perfect glass of draught easier.

This tray is cronsctructed of heavy gauge stainless steel with a durable plastic rinser. A cold water connection is reqired. This tray is designed to catch 6-10 faucets. You can plumb cold water to the rinser through a cold plate or through a refrigerated box.

• Type: Surface Mount Rinser
• Dimensions 47-1/4"L x 19-3/4"W
• Drip Area 40-1/2"L x 9"W
Tower Mount Area 29-1/2"L x 6"W
• Faucets 6-10
• Finish: Polished Stainless Steel
• Rinse away any impurities that might be in the glass.
• Chill the glass utilizing cold water.
• A wetted glass pours better.

Rinser Water Inlet Installation:

• Always check local plumbing codes first.
• Install in-line water regulator set at 30 PSI from the street water supply (no greater, perfect operating pressure).
• Install in-line one way check valve from the street water supply (prevents pressure drop which can cause leaking).
• Install in-line shut-off for the rinser system from the street water supply (this must be turned off nightly).
• If teed into soda system make sure system can handle the increased water demand. Have plumber install a 45° 1/2" O.D. barb for the drains if line is not hard plumbed into the system.
• Install a shut-off for the water supply if line is not hard plumbed into the system.

UPC: 608866315094