The Micromatic Pro-Line Glycol Power Pack features a powerful 3/4 HP Compressor, two pumps and motors and is designed for up to a 350 foot run.
A glycol chiller is the right solution if you're using a long-draw system - meaning you would like to have your chiller several feet away from where you plan to dispense. This system implements the power of glycol to move beer further distances, while still keeping it cold from keg to tap. Propylene glycol is combined with water to create a chilled mixture that's pumped from the glycol power pack through the cooling lines that run parallel to your beer lines. Propylene glycol, a non-toxic, food-grade antifreeze, is the main component that's been used for many years in food-processing systems. Glycol cooled draft beer dispensing systems are typically used in commercial applications such as bars, restaurants, and stadiums.
- Glycol Power Pack
- ETL Listed
- 3/4HP Air Cooled Compressor
- .064 x 96" Capillary Tube
- 16 oz. of R-134a Refrigerant
- 5100/H BTUs
- Second Pump & motor Included
- 18 PSI Suction Pressure with bath filled at 32 degrees
- up to 350' Run
- 11.5 Gallon Bath Capacity
- 175 lbs
|Glycol Chiller Specs
|Maximum Distance||350 ft.|
|Glycol Tank Capacity||11.5 gal.|
|Dedicated Circuit||10.6 Amps.|
|Unit Weight||175 lbs.|
You may need to download Adobe Acrobat Reader to view and print PDF's. Click the link below to download Adobe Acrobat Reader for free.
Download Adobe Reader
Pro-Line 350 ft Glycol Power Pack - 3/4 HP Compressor Reviews
|Average Customer Rating:|
|(based on 0 reviews)|| |
All charges are based on a quantity of 1.
Click "Add to Cart" above to change quantities
and make actual ship method selection.