Haier HBF05EAVS 6.4 cu. ft. Beer Dispenser - Virtual Steel

The Haier HBF05EAVS Brewmaster Kegerator is designed to hold and dispense a 1/2, 1/4 or mini barrel keg of your favorite brew. Complete with an American Sankey Tap System, this free-standing kegerator has all the components you need to enjoy refreshing Draft Beer at home. This Keg Beer Dispenser features a Chrome Single-Faucet Beer Tower and a Plastic Drip Tray to collect spills. A Chrome Guardrail prevents your mugs and glasses from sliding off the Heavy Duty Worktop.

This kegerator can also be converted to a 6.4 cubic foot Beverage Center and comes with 2 removable full-width wire shelves. An Adjustable Thermostat allows you to control the temperature inside the Kegerator. Casters provide easy mobility of the unit. The decorative Virtual Steel, Platinum Finish Door and Handsome Black Cabinet make this Kegerator a stylish addition to any home bar or rec room.

This Haier HBF05EAVS comes complete with all the necessary Draft Beer equipment you need to pour Fresh Draft Beer straight from your keg. Included with the Haier HBF05EAVS Kegerator is a 5lb Aluminum Co2 Tank, a Single Gauge Regulator, "D" System Domestic Sankey Keg Couplers, and a Single Faucet Commercial Grade 15" Chrome Plated Metal Draft Beer Tower that will impress any Beer Aficionado. The Single Gauge Regulator measures Pounds Per Square Inch (PSI), features a Safety Blow Off at 55-65 PSI, and comes with a flow control inlet nipple filter as well as a permanent Quad-Ring Inlet Seal. The Keg Coupler is designed to fit most of your favorite Domestic Beer Kegs.

Please Note:

• The lightweight, 5 lb. Aluminum Co2 Tank is the preferred size of many brewers. It is shipped empty and does not come filled. You will need to get your Co2 Tank--for your Kegerator--filled locally. When filled, the 5 lb. Tank is good for approximately 5-6 Full Kegs.
• This unit comes with everything you need except the keg.

This kegerator can fit one Full Size or Pony Keg, up to two Quarter Slim Kegs, and up to three 5 gallon home brew kegs.

• The Haier HBF05EAVS Kegerator features a Black Cabinet with Decorative Virtual Steel Door
• This Keg dispenser comes with a Direct Draw Kit for D System Kegs. This Keg Tap system comes with all the commercial grade components needed to a domestic keg.
• Includes a brand new aluminum 5 lb. Aluminum Co2 Tank
  This Tank is produced from high strength aluminum alloy 6061-T6. This is superior to a steel tank because it will not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cyldiners are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators. Average fill good for 5-6 Kegs depending upon your fill. (5.5" diameter, 18.25" Height).
• Includes Single Gauge Co2 Regulator
  This Regulator works with any Co2 Tank with a CGA-320 valve. The single gauge measures PSI indicating how much Co2 pressure is inside the keg. Adjustable output pressure 0-60 psi. 3000 psig Max Primary Inlet. 60 psig Safety Relief Valve R82. Female CGA-320 connection. Ball valve outlet w/ 5/16" OD Hose Barb connection. Total ports = (2) Primary 1/4" FNPT ports, (2) Secondary 1/4" FNPT ports. UL Listed, Compressed Gas Regulator - for use w/ Air, Co2 and Inert Gases.
• Includes 5 feet of 5/16 Inch I.D. Draft Beer Line Assembly with 2 Snap Clamps
  The standard length is 5 feet of 5/16" I.D. Blue Air/Co2 Tubing made of Themoplastic Vinyl Hose (Super Vinyl). This tubing will not rot, swell or dry out and is unaffected by normal cleaning compounds. This air line assembly comes with two Plastic Snap Clamps with a reusable clamp design.
• Includes D system Lever Handle Keg Coupler which can Tap all Domestic Kegs
  These are Commercial Grade Lever Handle Keg Couplers. The HBF05EAVS is compatible with all domestic brand kegs. This Keg Tap works with all American "D" System Sankey Kegs. This coupler features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg all you have to do is pull out and then down on the lever handle to properly couple the keg. This Keg Coupler can be swapped out to a Home Brew Coupler for no additional cost.
• Includes a 2.5" Diameter Single Faucet Chrome Plated Metal Draft Tower
  The Tower is a commercial grade Single Column, Single Faucet, 2.5" Diameter, Chrome Plated Metal Draft Tower. This Tower comes complete with a Chrome Plated Faucet with Brass Lever and 5 Feet of 3/16 Inch I.D. Clear Beer Tubing that ends in a Nozzle & Hex Nut Assembly that connects to all standard keg couplers. This Tower is mounted using the gasket and four screws that are included.
• Includes a Chrome Beer Faucets with Brass Levers
  This premium quality faucet features a forged brass body with a highly polished chrome finish. This faucet has a brass shaft assembly and lever with a Teflon ball washer that ensures smooth operation. The brass lever has standard threading that is compatible with most branded tap handles.
• Complete American Sankey Tap System
• Chrome Beer Tower & Guardrail
• Heavy Duty Worktop & Cabinet
• Adjustable Thermostat
• Free-Standing Applications
• Holds Single or Double 1/8 Keg; Single or Double 1/4 Keg; or Single 1/2 Keg
• Casters for Easy Mobility
• Leveling Legs
• CO2 tank Included
• Weight: 106 pounds
• Includes 2 Full-Width Wire Shelves
• Converts to 6.4 cu. ft. Beverage Center
• Tap System Cleaning Kit
• UL/CUL Approved
• Energy Voltage- Frequency (Hz)115v/60hz - Amps1.7
• Dimensions: 36"h x 26-7/16"w x 26"d

Product Warranty

• 1 Year Parts and Labor
• Five Years-Parts Only Compressor

UPC: 688057301426

Dimensions
Height	33 1/4"
Width	23 11/16"
Depth	23 15/16"
Weight
Unit Weight	97 lbs
Shipping Weight	110 lbs
Warranty
Labor	1 year
Parts	1 year
Compressor (Parts Only)	5 year
Key Features
Built-in Capable	No
Security Lock	No
Keg Coupler	D System
Regulator	Single Gauge
CO2 Tank	5 lb
Cleaning Kit	No
Outdoor Use	No
Commercial Use	No
Keg Storage Capacities
Full Size / 1/2-Barrel	Holds 1
Pony Size / 1/4-Barrel	Holds 1
1/4-Barrel Slim	Holds 2
1/6-Barrel	Holds 2
5 gal. Ball/Pin Lock Keg	Holds 3
Exterior
Cabinet	Black
Drip Tray	Black Plastic
Guard Rail	Chrome
Casters	Yes
Draft Beer Tower
Number of Faucets	1
Material	Chrome
Height	9 1/4"
Diameter	2 1/2"
Door
Color / Material	Virtual Stainless
Number of Doors	1
Door Handle	No
Field Reversible	No
Accepts Custom Overlay Panel	No
Cooling System
Type	Compressor
Defrost System	Manual
Front Ventilation	No
Controls
Adjustable Thermostat	Yes
Digital	No
Electrical
Electrical Requirements	115v/60hz
Running Amps	1.7 A