Haier HBF205EABB Dual Tap Brewmaster Kegerator Beer Dispenser

Serve two different draft beers and enjoy them ice cold from your HBF205EABB Haier Dual Tap Brewmaster Kegerator Beer Dispenser. With its attractive Black Cabinet and Decorative Black Door, this Haier Brewmaster Kegerator will look good in any room in your home. This Kegerator has a 6.4 Cu. Ft. Capacity and dispenses either from a 1/2 Keg, or one 1/4 Kegs or one or two Mini Barrel Kegs of your favorite brews and comes complete with an American Sankey Tap System and Co2 Tank. With a Chrome Dual-Faucet Beer Tower, guardrail, heavy duty worktop, cabinet, and adjustable thermostat, this Free Standing Kegerator has all of the necessary components you will need to enjoy your refreshing draft beer at home with friends and family in no time! Also included with your Keg Beer Dispenser are Casters for easy Mobility so you can enjoy serving your beer from your Kitchen, your Game Room, and or your Home Bar!

If you are not going to use your Kegerator to Dispense Beer for a period of time, then you can easily convert your Kegerator to a Refrigerator/Beverage Center by installing the 2 Removable wire shelves that come with your Kegerator Draft Beer Dispenser. This Dual Faucet Kegerator measures at 23-11/16"W x 23-15/16"D x 33-1/4"H.

This Haier HBF205EABB comes complete with all the necessary Draft Beer equipment you need to pour Fresh Draft Beer straight from your keg. Included with the Haier HBF205EABB Kegerator is a 5lb Aluminum Co2 Tank, a Single Gauge Regulator with air distributor for two kegs, two "D" System Domestic Sankey Keg Couplers, and a Double Faucet Commercial Grade 15" Chrome Plated Metal Draft Beer Tower that will impress any Beer Aficionado. The Single Gauge Regulator measures Pounds Per Square Inch (PSI), features a Safety Blow Off at 55-65 PSI, and comes with a flow control inlet nipple filter as well as a permanent Quad-Ring Inlet Seal. The two Sankey Keg Couplers are designed to fit most of your favorite Domestic Beer Kegs.

Please Note:

The lightweight, 5 lb. Aluminum Co2 Tank is the preferred size of many brewers. It is shipped empty and does not come filled. You will need to get your Co2 Tank--for your Kegerator--filled locally. When filled, the 5 lb. Tank is good for approximately 5-6 Full Kegs.

This kegerator can fit one Full Size or Pony Keg, up to two Quarter Slim Kegs, and up to three 5 gallon home brew kegs.

• The Haier HBF205EABB Kegerator features a Black Cabinet with Decorative Virtual Steel Door
• This Keg dispenser comes with two complete Direct Draw Kits for D System Kegs. This Keg Tap system comes with all the commercial grade components needed to tap two domestic keg.
• Includes a brand new aluminum 5 lb. Aluminum Co2 Tank
  This Tank is produced from high strength aluminum alloy 6061-T6. This is superior to a steel tank because it will not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cyldiners are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators. Average fill good for 5-6 Kegs depending upon your fill. (5.5" diameter, 18.25" Height).
• Includes Single Gauge Co2 Regulator
  This Regulator works with any Co2 Tank with a CGA-320 valve. Comes with an air distributor. The single gauge measures PSI indicating how much Co2 pressure is inside the keg. Adjustable output pressure 0-60 psi. 3000 psig Max Primary Inlet. 60 psig Safety Relief Valve R82. Female CGA-320 connection. Ball valve outlet w/ 5/16" OD Hose Barb connection. Total ports = (2) Primary 1/4" FNPT ports, (2) Secondary 1/4" FNPT ports. UL Listed, Compressed Gas Regulator - for use w/ Air, Co2 and Inert Gases.
• Includes two of 5 feet of 5/16 Inch I.D. Draft Beer Line Assembly with 2 Snap Clamps
  The standard length is 5 feet of 5/16" I.D. Blue Air/Co2 Tubing made of Themoplastic Vinyl Hose (Super Vinyl). This tubing will not rot, swell or dry out and is unaffected by normal cleaning compounds. This air line assembly comes with two Plastic Snap Clamps with a reusable clamp design.
• Includes Two D system Lever Handle Keg Coupler which can Tap all Domestic Kegs
  These are Commercial Grade Lever Handle Keg Couplers. The HBF205EABB is compatible with all domestic brand kegs. This Keg Tap works with all American "D" System Sankey Kegs. This coupler features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg all you have to do is pull out and then down on the lever handle to properly couple the keg. This Keg Coupler can be swapped out to a Home Brew Coupler for no additional cost.
• Includes a 3" Diameter Dual Faucet Chrome Plated Metal Draft Tower
  The Tower is a commercial grade Single Column, Dual Faucet, 3" Diameter, Chrome Plated Metal Draft Tower. This Tower comes complete with Two Chrome Plated Faucets with Brass Levers and 5 Feet of 3/16 Inch I.D. Clear Beer Tubing that ends in a Nozzle & Hex Nut Assembly that connects to all standard keg couplers. This Tower is mounted using the gasket and four screws that are included.
• Includes Two Chrome Beer Faucets with Brass Levers
  This premium quality faucet features a forged brass body with a highly polished chrome finish. This faucet has a brass shaft assembly and lever with a Teflon ball washer that ensures smooth operation. The brass lever has standard threading that is compatible with most branded tap handles.
• Complete American Sankey Tap System
• Chrome Beer Tower & Guardrail
• Heavy Duty Worktop & Cabinet
• Adjustable Thermostat
• Free-Standing Applications
• Holds Single or Double 1/8 Keg; Single or Double 1/4 Keg; or Single 1/2 Keg
• Casters for Easy Mobility
• Leveling Legs
• CO2 tank Included
• Weight: 106 pounds
• Includes 2 Full-Width Wire Shelves
• Converts to 6.4 cu. ft. Beverage Center
• Tap System Cleaning Kit
• UL/CUL Approved
• Dimensions: 36"h x 26-7/16"w x 26"d

Product Warranty

• 1 Year Parts and Labor
• Five Years-Parts Only Compressor