Haier HBF205EAVS Dual Tap Brewmaster Kegerator

The Haier HBF205EAVS Dual Tap Kegerator will keep your beer cool allowing you and your guests to enjoy refreshing ice cold draft beer at home. Complete with an American Sankey tap System--allowing you to tap Most Domestic Kegs--along with a Co2 tank, this Free-Standing Kegerator has all the components you will need to enjoy Draft Beer at home. This Keg Beer Dispenser holds up to a Full Size Keg and boasts a Chrome Dual-Faucet Beer Tower and Guardrail that prevents your mugs and glasses from sliding off the heavy duty worktop. The HBF205EAVS Kegerator also comes equipped with an adjustable thermostat, plastic drip tray, and casters for easy portability.

If you are not going to use your Kegerator for a period of time, you can convert it into a 5.8 Cu. Ft. Beverage Center by inserting the 2 removable full-width wire shelves. This Dual Faucet Kegerator measures at 23-11/16"W x 23-15/16"D x 33-1/4"H.

This Haier HBF205EAVS comes complete with all the necessary Draft Beer equipment you need to pour Fresh Draft Beer straight from your keg. Included with the Haier HBF205EAVS Kegerator is a 5lb Aluminum Co2 Tank, a Single Gauge Regulator with air distributor for two kegs, two "D" System Domestic Sankey Keg Couplers, and a Double Faucet Commercial Grade 15" Chrome Plated Metal Draft Beer Tower that will impress any Beer Aficionado. The Single Gauge Regulator measures Pounds Per Square Inch (PSI), features a Safety Blow Off at 55-65 PSI, and comes with a flow control inlet nipple filter as well as a permanent Quad-Ring Inlet Seal. The two Sankey Keg Couplers are designed to fit most of your favorite Domestic Beer Kegs.

This kegerator can fit one Full Size or Pony Keg, up to two Quarter Slim Kegs, and up to three 5 gallon home brew kegs.

Please Note:

The lightweight, 5 lb. Aluminum Co2 Tank is the preferred size of many brewers. It is shipped empty and does not come filled. You will need to get your Co2 Tank--for your Kegerator--filled locally. When filled, the 5 lb. Tank is good for approximately 5-6 Full Kegs.

• The Haier HBF205EAVS Kegerator features a Black Cabinet with Decorative Virtual Steel Door
• This Keg dispenser comes with two complete Direct Draw Kits for D System Kegs. This Keg Tap system comes with all the commercial grade components needed to tap two domestic keg.
• Includes a brand new aluminum 5 lb. Aluminum Co2 Tank
  This Tank is produced from high strength aluminum alloy 6061-T6. This is superior to a steel tank because it will not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cyldiners are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators. Average fill good for 5-6 Kegs depending upon your fill. (5.5" diameter, 18.25" Height).
• Includes Single Gauge Co2 Regulator
  This Regulator works with any Co2 Tank with a CGA-320 valve. Comes with an air distributor. The single gauge measures PSI indicating how much Co2 pressure is inside the keg. Adjustable output pressure 0-60 psi. 3000 psig Max Primary Inlet. 60 psig Safety Relief Valve R82. Female CGA-320 connection. Ball valve outlet w/ 5/16" OD Hose Barb connection. Total ports = (2) Primary 1/4" FNPT ports, (2) Secondary 1/4" FNPT ports. UL Listed, Compressed Gas Regulator - for use w/ Air, Co2 and Inert Gases.
• Includes two of 5 feet of 5/16 Inch I.D. Draft Beer Line Assembly with 2 Snap Clamps
  The standard length is 5 feet of 5/16" I.D. Blue Air/Co2 Tubing made of Themoplastic Vinyl Hose (Super Vinyl). This tubing will not rot, swell or dry out and is unaffected by normal cleaning compounds. This air line assembly comes with two Plastic Snap Clamps with a reusable clamp design.
• Includes Two D system Lever Handle Keg Coupler which can Tap all Domestic Kegs
  These are Commercial Grade Lever Handle Keg Couplers. The HBF205EAVS is compatible with all domestic brand kegs. This Keg Tap works with all American "D" System Sankey Kegs. This coupler features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg all you have to do is pull out and then down on the lever handle to properly couple the keg. This Keg Coupler can be swapped out to a Home Brew Coupler for no additional cost.
• Includes a 3" Diameter Dual Faucet Chrome Plated Metal Draft Tower
  The Tower is a commercial grade Single Column, Dual Faucet, 3" Diameter, Chrome Plated Metal Draft Tower. This Tower comes complete with Two Chrome Plated Faucets with Brass Levers and 5 Feet of 3/16 Inch I.D. Clear Beer Tubing that ends in a Nozzle & Hex Nut Assembly that connects to all standard keg couplers. This Tower is mounted using the gasket and four screws that are included.
• Includes Two Chrome Beer Faucets with Brass Levers
  This premium quality faucet features a forged brass body with a highly polished chrome finish. This faucet has a brass shaft assembly and lever with a Teflon ball washer that ensures smooth operation. The brass lever has standard threading that is compatible with most branded tap handles.
• Complete American Sankey Tap System
• Chrome Beer Tower and Guardrail
• Heavy Duty Worktop and Cabinet
• Adjustable Thermostat
• Free Standing Applications
• Casters for Easy Mobility
• Converts to 5.8 Cu. Ft. Beverage Center
• Leveling Legs
• CO2 Tank Included
• Dimensions: Width 23-11/16" Depth 23-15/16" Height 33-1/4"
• Interior Floor: Stainless Steel Insert Casters

Product Warranty