Kegco K1500S Kegerator - 15" Undercounter Built-in Keg Beer Dispenser with Stainless Steel Door

The Kegco K1500S Undercounter Built-in Keg Beer Dispenser is a perfect option for someone wanting a built-in draft beer system but is limited in space. It's small 15" wide footprint allows it to fit in the same space as a trash compactor and still fit a 5 gallon keg, the preferred size of most microbreweries and home brewers. It's exclusive Active Air internal fan cooling system guarantees your keg is cold from top to bottom. This kegerator is equipped with a complete Direct Draw Kit for D System Domestic Kegs. This beer cooler houses your kegs in an all-black cabinet with a stylish stainless steel door. This Kegerator is sure to be talked about at your next dinner party, or sporting event! So sit back, relax, and enjoy your meal and or game with an ice cold Draft Beer served directly from your new Kegerator!

This Kegco K1500S comes complete with all the necessary draft beer equipment you need to pour fresh draft beer straight from your keg. Included with the Kegco K1500S Kegerator is a 5lb aluminum Co2 tank, a single gauge regulator, a keg coupler, and a 15" chrome plated metal draft beer tower that will impress any beer aficionado. The single gauge regulator measures Pounds Per Square Inch (PSI), features a safety blow off at 55-65 PSI, and comes with a flow control inlet nipple filter as well as a permanent quad-ring inlet seal. The sankey keg coupler is designed to fit most of your favorite Domestic beer kegs. Please Note: The lightweight, 5lb Aluminum Co2 Tank is the preferred size of many Brewers. It is shipped empty and does not come filled. You will need to get your Co2 tank filled locally. When filled, the 5 lb tank is good for approximately 13-14 five-gallon Kegs.

This Draft Beer Dispenser is created for in home use and is both quiet and energy efficient, making the storing of your kegs in your home a more pleasant experience over and above what some other kegerators would.

This kegerator will fit 5 gallon domestic kegs, 5 gallon Cornelius Pin Lock Kegs, 5 gallon Cornelius Ball lock kegs and 1/4 barrel slim domestic kegs.

• The Kegco K1500S kegerator features a Black Cabinet with a Stainless Steel Door
• Textured serving counter top.
• Internal fan circulates the air for fast and thorough cooling of your beer keg
• This Keg dispenser comes with a complete Direct Draw Kit for 5 gallon kegs. This Keg Tap system comes with all commercial grade components.
• Includes a brand new aluminum 5 lb. Aluminum Co2 Tank
  This Tank is produced from high strength aluminum alloy 6061-T6. This is superior to a steel tank because it will not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cyldiners are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators. Average fill good for 5-6 Kegs depending upon your fill. (5.5" diameter, 18.25" Height).
• Includes Single Gauge Co2 Regulator
  This Regulator works with any Co2 Tank with a CGA-320 valve. The single gauge measures PSI indicating how much Co2 pressure is inside the keg. Adjustable output pressure 0-60 psi. 3000 psig Max Primary Inlet. 60 psig Safety Relief Valve R82. Female CGA-320 connection. Ball valve outlet w/ 5/16" OD Hose Barb connection. Total ports = (2) Primary 1/4" FNPT ports, (2) Secondary 1/4" FNPT ports. UL Listed, Compressed Gas Regulator - for use w/ Air, Co2 and Inert Gases.
• Includes 5 feet of 5/16 Inch I.D. Draft Beer Line Assembly with 2 Snap Clamps
  The standard length is 5 feet of 5/16" I.D. Blue Air/Co2 Tubing made of Themoplastic Vinyl Hose (Super Vinyl). This tubing will not rot, swell or dry out and is unaffected by normal cleaning compounds. This air line assembly comes with two Plastic Snap Clamps with a reusable clamp design.
• Includes D system Lever Handle Keg Coupler which can Tap all Domestic Kegs
  This is a Commercial Grade Lever Handle Keg Coupler. The K199B-1 is compatible with all domestic brand kegs. This Keg Tap works with all American "D" System Sankey Kegs. This coupler features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg all you have to do is pull out and then down on the lever handle to properly couple the keg. This Keg Coupler can be swapped out to a Home Brew Coupler for no additional cost.
• Includes a 3" Diameter Chrome Plated Metal Draft Tower
  The Tower is a commercial grade Single Column, Single Faucet, 3" Diameter, Chrome Plated Metal Draft Tower. This Tower comes complete with a chrome plated faucet with brass lever and 5 Feet of 3/16 Inch I.D. Clear Beer Tubing that ends in a Nozzle & Hex Nut Assembly that connects to all standard keg couplers. This Tower is mounted using the gasket and four screws that are included.
• Includes Chrome Beer Faucet with Brass Lever
  This premium quality faucet features a forged brass body with a highly polished chrome finish. This faucet has a brass shaft assembly and lever with a Teflon ball washer that ensures smooth operation. The brass lever has standard threading that is compatible with most branded tap handles.
• PLEASE NOTE: Full Size and Pony kegs will not fit into this Kegerator.
• Measures at 33.5"H x 15"W x 23.75"D (25" w/ handle)
• 1 year parts and labor.
• 5 years on compressor (parts only)