Time is Running Out - Save up to 25%

Kegco K199B-2 Dual Faucet Kegerator with Black Cabinet and Door

Enlarge Kegco K199B-2 Dual Faucet Kegerator with Black Cabinet and Door
Enlarge Image
Kegco K199B-2 KegeratorKegco K199B-2 Door OpenOpen Door with Pony KegK199SS-2 with Full KegK199B-2 with Homebrew Kegs
K199B-2 with 2 5-gallonTop TowerOpen Door with Wire ShelvesBack Co2 tank Beer Line
Temperatue ControlKegco Casters

Kegco's K199B-2 Kegerator features a Black Cabinet and Door / Two Wired Shelves allow you to easily convert this Dual Tap Kegerator into a regular Refrigerator / Reversible Door / Keg Cooler Holds up to a Full Size Keg / Includes everything needed to operate Two Domestic D System Kegs / PLEASE NOTE: Coors Kegs will not fit into this Kegerator. Price Includes Two D System Couplers

List Price: $749.98
Regular Price: $599.99
Sale Price: $479.99 You Save $120.00 (20%)
Quantity:  
based on 38 Reviews
4.5

This K199B-2 Kegerator by Kegco is an excellent Dual-Tap Full Size Keg Beer Dispenser at a great value price! Equipped with a complete Direct Draw Kit for Two D System Domestic Kegs, this Beer Cooler houses your Kegs in an All-Black Cabinet with a Decorative Black Door. With two faucets, pouring your favorite Draft Beer has never been faster or easier. Two Removable Wire Shelves allow you to easily convert this Kegerator into an All-Refrigerator/Beverage Center. With 2-1/2" Casters you can move this stylish Kegerator to any room in your home, from the Kitchen, to the Game Room, to the Man Cave. So sit back, relax, and enjoy serving your Favorite Draft Beer for your friends and or yourself out of your new Dual Faucet Kegerator!

Works with Commercial and Home Brew Kegs.

This Kegco K199B-2 comes complete with all the necessary Draft Beer equipment you need to pour Fresh Draft Beer straight from your keg. It can be easily upgraded to dispense kegged kombucha or soda kegs as well. Included with the Kegco K199SS-2 Kegerator is a 5lb Aluminum Co2 Tank, a Single Gauge Regulator with air distributor for two kegs, two "D" System Domestic Sankey Keg Couplers, and a Double Faucet Commercial Grade 15" Chrome Plated Metal Draft Beer Tower that will impress any Beer Aficionado. The Single Gauge Regulator measures Pounds Per Square Inch (PSI), features a Safety Blow Off at 55-65 PSI, and comes with a flow control inlet nipple filter as well as a permanent Quad-Ring Inlet Seal. The two Sankey Keg Couplers are designed to fit most of your favorite Domestic beer kegs. Please Note: The lightweight, 5lb Aluminum Co2 Tank is the preferred size of many brewers. It is shipped empty and does not come filled. You will need to get your Co2 Tank--for your Kegerator--filled locally. When filled, the 5 lb tank is good for approximately 5-6 full kegs.

This Draft Beer Dispenser is created for in home use and is both quiet and energy efficient, making the storing of your kegs in your home a more pleasant experience over and above what some other kegerators would. Though quiet and energy efficient this Kegerator has the capacity to hold 1/2 or Full-Size Kegs (15.5 gal), 1/4 Beer Barrels, and Ponie Kegs (7.75 gal).

Additional Features of this Dual-Tap Full-Size Kegco K199SS-2 Kegerator includes a Removable Drip Tray to Collect Spills, a Stainless Steel Interior floor mat for long lasting durability and easy glide of beer keg, a gas hose, beer tubing, washer, clamps, a textured serving counter top and an attractive Metal Safety Rail to help keep your beer mugs and glasses from sliding off.

Keg Capacity Chart.

Does Not Fit These Kegs.This keg will hold one Full Size, Straight Pony or Quarter Slim Keg and up to two Sixth Slim, Strap Handle or Rubber Home Brew Kegs. Please Note: It will not fit Bevel or Rubber Kegs that are wider in the middle than at the top or bottom. These are commonly used by Coors and Miller Brewing Companies.

  • The Kegco K199B-2 Kegerator features a Black Cabinet with Decorative Black Door
  • This Keg dispenser comes with two complete Direct Draw Kits for D System Kegs. This Keg Tap system comes with all the commercial grade components needed to tap two Domestic Kegs.
  • Includes a brand new aluminum 5 lb. Aluminum Co2 Tank
    This Tank is produced from high strength aluminum alloy 6061-T6. This is superior to a steel tank because it will not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cyldiners are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators. Average fill good for 5-6 Kegs depending upon your fill. (5.5" diameter, 18.25" Height).
  • Includes Single Gauge Co2 Regulator
    This Regulator works with any Co2 Tank with a CGA-320 valve. Comes with an air distributor. The single gauge measures PSI indicating how much Co2 pressure is inside the keg. Adjustable output pressure 0-60 psi. 3000 psig Max Primary Inlet. 60 psig Safety Relief Valve R82. Female CGA-320 connection. Ball valve outlet w/ 5/16" OD Hose Barb connection. Total ports = (2) Primary 1/4" FNPT ports, (2) Secondary 1/4" FNPT ports. UL Listed, Compressed Gas Regulator - for use w/ Air, Co2 and Inert Gases.
  • Includes two of 5 feet of 5/16 Inch I.D. Blue Air Line Assembly with 2 Snap Clamps
    The standard length is 5 feet of 5/16" I.D. Blue Air/Co2 Tubing made of Themoplastic Vinyl Hose (Super Vinyl). This tubing will not rot, swell or dry out and is unaffected by normal cleaning compounds. This air line assembly comes with two Plastic Snap Clamps with a reusable clamp design.
  • Includes Two D system Lever Handle Keg Coupler which can Tap all Domestic Kegs
    These are Commercial Grade Lever Handle Keg Couplers. The K199B-2 is compatible with all domestic brand kegs. This Keg Tap works with all American "D" System Sankey Kegs. This coupler features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg all you have to do is pull out and then down on the lever handle to properly couple the keg. This Keg Coupler can be swapped out to a Home Brew Coupler for no additional cost.
  • Includes a 3" Diameter Dual Faucet Chrome Plated Metal Draft Tower
    The Tower is a commercial grade Single Column, Dual Faucet, 3" Diameter, Chrome Plated Metal Draft Tower. This Tower comes complete with Two Chrome Plated Faucets with Brass Levers and 5 Feet of 3/16 Inch I.D. Clear Beer Tubing that ends in a Nozzle & Hex Nut Assembly that connects to all standard keg couplers. This Tower is mounted using the gasket and four screws that are included.
  • Includes Two Chrome Beer Faucets with Brass Levers
    This premium quality faucet features a forged brass body with a highly polished chrome finish. This faucet has a brass shaft assembly and lever with a nylon ball washer that ensures smooth operation. The brass lever has standard threading that is compatible with most branded tap handles.
  • PLEASE NOTE: Coors Kegs will not fit into this Kegerator.
  • Measures at 33"H x 20"W x 25.5"D
  • Reversible Door
  • the Kegco K199B-2 Beer Dispenser comes with 2 full-width wire shelves and a hole plug which allows you to convert kegerator into a Compact Refrigerator.
  • Holds: 1/2 barrels / Full Size Kegs (15.5gal), 1/4 barrels / Ponies (7.75gal)
  • Removable Drip Tray with Grill to Collect spills
  • Chrome Guard Rail to Protect Your Mugs and Glasses from Sliding Off
  • Stainless Steel Interior Floor Mat for long lasting durability and easy glide of beer keg.
  • Textured Serving Counter Top.
  • UL Listed

WARRANTY INFORMATION

  • 1 year parts and labor.
  • 5 years on compressor (parts only)

  • UPC: 608938598202
    Dimensions
    Height33"
    Width20'
    Depth25 1/2"
    Weight
    Unit Weight95 lbs.
    Shipping Weight110 lbs.
    Warranty
    Labor1 Year
    Parts1 Year
    Compressor (Parts Only)5 Years
    Key Features
    Built-in CapableNo
    Security LockNo
    Keg CouplerYes
    RegulatorSingle Gauge
    CO2 Tank5 lb
    Cleaning KitNo
    Outdoor UseNo
    Commercial UseNo
    Keg Storage Capacities
    Full Size / 1/2-BarrelHolds 1
    Pony Size / 1/4-BarrelHolds 1
    1/4-Barrel SlimHolds 1
    1/6-BarrelHolds 2
    5 gal. Ball/Pin Lock KegHolds 2
    5-Liter / Mini KegHolds 2
    Exterior
    CabinetBlack Cabinet
    Drip TrayBlack Plastic
    Guard RailChrome
    CastersYes
    Draft Beer Tower
    Number of Faucets2 Faucet
    MaterialChrome
    Height9 1/4"
    Diameter2 1/2"
    Door
    Color / MaterialStainless Steel
    Number of Doors1
    Door HandleRecessed
    Field ReversibleYes
    Accepts Custom Overlay PanelNo
    Cooling System
    TypeCompressor
    Front VentilationNo
    Controls
    Adjustable ThermostatYes
    DigitalNo
    Electrical
    Electrical Requirements115 V, 60 Hz
    PDFDispense Kit Assembly Manual
    PDFParts Diagram

    Kegco K199B-2 Dual Faucet Kegerator with Black Cabinet and Door Reviews

    Average Customer Rating:
    (4.5)
    (based on 38 reviews) 
    Wine on tap
    by:LJ (09-19-2014)
    Boston, MA
    Comments:We bought the kegorator to serve Define Wines rose' on tap ! It is the perfect addition to our pool house. Wheels so it can be used inside or out. Sleek design fits in with our other stainless appliances.
    Bottom Line:I would recommend this product.
     
    Kegco k199b-2
    by:Connie (09-09-2014)
    Oregon City
    Comments:It's our 1st dispenser so have nothing to compare to. Was easy for me to put together (I didn't put the kegs in, but got it ready), while other half at work. They guys did run buy the house to bring it in for me. I already had parts laid out. It was very simple to put together.
    All parts were there and arrived with no damage. Have 1st keg in and is carbonating just fine. Soon will instal the 2nd keg! So far so Good.
    Bottom Line:I would recommend this product.
     
    Very happy!!
    by:Leroy D Mercer (07-31-2014)
    Fishers, IN
    Comments:Built a custom bar-cabinet w/French doors to fit this in; rolls perfect with the casters! Keeps my beer cold and it's always available. Kegging my own beer is way better and faster than bottling! Friends and family love it too!
    Bottom Line:I would recommend this product.
     
    Great unit
    by:Wayne (06-20-2014)
    McLean, VA
    Comments:My Kegerator was delivered in great condition. All in I think it took 30-40 minutes to put everything together. I followed the instructions to let it sit for 8 hrs before plugging it in, then run at the coldest setting. It gets down to 38 degrees, which is perfect. After a week I'm kegged up and drinking tap beer! I timed a batch for the delivery of the kegerator and keg. Very happy with the unit to this point.
    Bottom Line:I would recommend this product.
     
    Fantastic after a little modification
    by:LordTakuban (06-14-2014)
    South Florida
    Comments:This came shipped and packaged really well from California to Florida and arrived in about a week from ordering. Setup was pretty simple, add the castors to the bottom (if you are not putting it under a counter), and attach the tower to the top. I won't go into the setup too much since you can find that info all over the place. I'll talk more about the modifications I did to make this really work well. For some more info, I've had this for a bout 6 months or less, but I have run about 8 to 10 1/6 kegs through it without any problems.

    First, the good...

    1. It is pretty quiet (in most circumstances)

    2. It cools the area to a nice mid to high 30* range without having to modify the thermostat.

    3. It will hold 2 1/6 kegs and a CO2 tank with big regulator and have room for a few extra little things (More on that later).

    4. It works and you get draft beer right in your house.


    Now the bad...

    1. It has a REALLY LOUD vibration that occurs only if it's in just the right angle/location/something. (Solution listed below)

    2. The cold plate makes a VERY LOUD popping sound. This is because it's too close to the back wall of the unit. (Solution listed below).

    3. It has no fans to circulate the cold air and the contents won't get as cold or as fast. (Solution listed below).

    4. The lines in the tower are still going to be warm. (Solution listed below).


    Solutions via modification:

    1. VIBRATION: I went to move it to try to find where exactly the vibration was coming from and after moving it maybe 1/4", it stopped and hasn't made the noise since. So placement is very important. I suspect you could still find what is vibrating and attach some dynamat or some other vibration dampening material if the location can't be altered.

    2. POPPING SOUND: For this, I used some spare automotive vacuum hose I had in the garage. I cut 4 pieces off at about 1/4" lengh. I then unscrewed the cold plate from the back wall and re-attached it with a piece of vacuum hose between the plate and wall. The screw went through the natural hole in the hose. Getting the screw back in the threaded hole in the back wall was a bit tricky on a couple, but not too bad. Now it rarely makes a popping sound at all.

    3. POOR CIRCULATION: I bought a AI-MPF80A2 Quiet Dual 80mm USB Fan that comes with 2 fans that are linked together with the same wire. I have one blowing from the left side toward the right by the cold plate. And the other is angled just to teh right of that one, but pointing upward. These circulate the air around the inside quite well and evenly cool the contents much quicker than without them. I only paid $15 for them and they are definitely worth it.

    4. TOWER IS WARM: I bought a tower cooler. Yes, you can make one yourself, but the amount of time you save by just buying one from someone else is worth it IMHO. I have this sitting next to the other fans (The base that is) with the blower hose just slightly into the tower area and zip-tied to the beer lines. This reduces that first pour foam that you often get due to the warmer temperature beer.

    I also bought some USB extension cables so I could run the power for the 2 fan accessories easily.

    Another modification (If you want to call it that) is I added a Indoor/Outdoor Digital Suction Cup Thermometer for about $7.00. The suction cup doesn't stick to anything in the kegerator, but it lets me sort of hang it on one of the kegs. It shows min and max temps for the day as well as current temp. I should probably buy a few more to keep as backups since they are so cheap. But this one has worked great the entire time I've had the kegerator and I have dropped it multiple times.


    Conclusion...

    So with those few modifications, this afordable Kegerator does really well and suits my needs perfectly. I might mount my CO2 tank outside and run a line in to the diverter that will still be inside the unit. But I'll need to get some motivation to do that first. :)

    I hope this was helpful. I would definitely recommend this unit to a friend and the modifications I did (All totaled were less than $75). Any other kegerator with those *features* built in would cost a LOT more than that.
    Bottom Line:I would recommend this product.
     
    Shipping Calculator
    Enter Your Shipping Zip Code:
    Shipping Options
    Please enter a zip code.
    All charges are based on a quantity of 1.
    Click "Add to Cart" above to change quantities
    and make actual ship method selection.

    Available Options:

    SPECIFY DRAFT TOWER CHOICE
    Chrome Plated Metal 2 Faucet Tower (Included) [more info] +$0.00
    Upgrade to Polished SS 2 Faucet Tower [more info] +$15.00
    Upgrade to Polished PVD Brass 2 Faucet Tower [more info] +$120.00
    Upgrade to Brushed SS 2 Faucet Tower (100% SS Contact) [more info] +$60.00
    Upgrade to Stainless Steel 2 Faucet Tower w/ Perlick 630SS [more info] +$65.00
    Remove Draft Tower from Order (No Thanks Already Have One) -$50.00

    OPTIONAL DRIP TRAY UPGRADE (Big Savings When Purchased with Kegerator)
    Optional DRIP TRAY Upgrade Upgrade to 12 Inch Long Surface Mount Drip Tray [more info] +$22.00
    Upgrade to 12 Inch Drip Tray with Long Drain [more info] +$35.00
    Surface Mount Drip Tray with Column Cut-Out - No Drain [more info] +$49.95
    Surface Mount Drip Tray with Column Cut-Out - With Drain [more info] +$59.95
    12 Inch Long Surface Mount Drip Tray with Brass Grill [more info] +$94.95
    Surface Mount Drip Tray with Column Cut-Out - Brass Grill [more info] +$209.95

    SPECIFY FIRST KEG COUPLER CHOICE (Default is D System Coupler)
    Default D System Keg Coupler Lever Handle (Included) [more info] +$0.00
    Select Ball Lock Home Brew Keg Tap [more info] +$0.00
    Select Pin Lock Home Brew Keg Tap [more info] +$0.00
    Select a S System Keg Tap Coupler (Import Kegs) [more info] +$5.00
    Select a U System Keg Tap Coupler (Guiness Kegs) [more info] +$25.00
    Select a Perlick Lo-Boy Low Profile D System Keg Coupler [more info] +$34.95
    Remove Keg Coupler from Order (No Thanks Already Have One) -$10.00

    SPECIFY SECOND KEG COUPLER CHOICE
    Default D System Keg Coupler Lever Handle (Included) [more info] +$0.00
    Select Ball Lock Home Brew Keg Tap [more info] +$0.00
    Select Pin Lock Home Brew Keg Tap [more info] +$0.00
    Select a S System Keg Coupler (Import Kegs) [more info] +$5.00
    Select a U System Keg Coupler (Guness Kegs) [more info] +$25.00
    Perlick Lo-Boy Low Profile D System Keg Tap Coupler [more info] +$34.95
    Remove Keg Coupler from Order (No Thanks Already Have One) -$10.00

    Optional Beer Y Splitter Fitting
    Add 898B - Beer Y Fitting with 3/8 Inch Bore [more info] +$16.95

    SPECIFY CO2 REGULATOR CONFIGURATION (Kegerator Includes Single Gauge Regulator)
    Single Gauge Regulator w/Plastic Air Distributor (Included) [more info] +$0.00
    Upgrade to 2 Product Premium Pro Series Double Gauge Regulator w/ Two Product Out [more info] +$15.00
    Remove CO2 Regulator from Order (No Thanks Already Have One) -$10.00

    SPECIFY CO2 TANK
    5 lb. Co2 Tank (Included - Comes Empty) [more info] +$0.00
    Upgrade to 10 lb. Co2 Tank (May have to Place Outside Unit) [more info] +$17.95
    Remove Co2 Tank from Order (No Thanks Already Have One) -$35.00

    OPTIONAL CLEANING KIT (Important To Clean Lines after each Keg)
    Optional CLEANING KIT! Add Economy Beer Line Cleaning Kit [more info] +$21.95
    Add Beer Cleaning Kit - 1 Qt. Bottle w/ 33 oz. Cleaner [more info] +$54.99
    Kegco Deluxe Hand Pump Pressurized Keg Beer Kegerator Cleaning Kit w/ 32 oz. Cleaner [more info] +$49.99
    Draftec Deluxe Hand Pump Pressurized Keg Beer Kegerator Cleaning Kit w/ 32 oz. Cleaner [more info] +$51.99
    Add Complete D System Pressurized Cleaning Kit [more info] +$102.95

    OPTIONAL TAP HANDLES (Plastic Faucet Knobs are Included)
    Two Chalkboard Beer Tap Handles [more info] +$86.00
    Two White Board Dry Erase Beer Tap Handles [more info] +$86.00
    Two Twist - 7" BOD (Branding On Demand) Tap Handles [more info] +$84.00
    Two 4" BOD (Branding On Demand) Tap Handles, Metal [more info] +$34.50
    Two Pebble - 7" BOD (Branding On Demand) Tap Handles [more info] +$84.50
    Two 4" BOD (Branding On Demand) Tap Handles [more info] +$29.00
    Two 6" BOD (Branding On Demand) Tap Handles [more info] +$30.00

    OPTIONAL SET OF 2 FAUCET LOCKS
    Add 2 Slide-on Faucet Locks [more info] +$69.95
    Add 2 Wrap Around Faucet Locks [more info] +$101.90

    OPTIONAL HOMEBREW KEG
    Brand New - Kegco 3 Gallon Strap Handle Keg [more info] +$89.99
    Brand New - Kecgo 5 Gallon Strap Handle Keg [more info] +$94.99
    Brand New - Kegco 5 Gallon Rubber Top Keg [more info] +$101.99
    5 Gallon Ball Lock Keg - Reconditioned Beer Keg [more info] +$69.99

    Add Kegco Apparel
    Kegco Flexfit Mid Pro Baseball Cap  [more info]
    Kegco Trucker Snap Back Hat  [more info]
    Kegco Short Sleeve T-Shirt - Black  [more info]
    Kegco Short Sleeve T-Shirt - White  [more info]
    Kegco Long Sleeve T-Shirt - Black  [more info]
    Kegco Long Sleeve T-Shirt - White  [more info]

    Optional Extended Warranty
    New Leaf ServicePro 1 Year Extended Warranty [more info] +$24.99
    New Leaf ServicePro 3 Year Date of Purchase Warranty [more info] +$49.99
    New Leaf ServicePRO 5 Year Date of Purchase Warranty [more info] +$99.99
    New Leaf ServicePRO 3 Year Date of Purchase Commercial Warranty [more info] +$145.98
    New Leaf ServicePRO 5 Year Date of Purchase Commercial Warranty [more info] +$281.98




    Top Sellers

    Kegco K309SS-1 Kegerator

    Kegco K199SS-2 Dual Faucet Kegerator with Black Cabinet and Stainless Steel Door

    Kegco K309SS-1 Kegerator

    Kegco K209B-2 Kegerator