Kegco K199SS-2 Dual Faucet Kegerator with Black Cabinet and Stainless Steel Door
Preferred by many a Beer Aficionado, this Kegco K199SS-2 Kegerator is a great Dual-Tap Full Size Keg Beer Dispenser at an excellent value price! Equipped with a complete Direct Draw Kit for Two D System Domestic Kegs, this Beer Cooler houses your Kegs in an All-Black Cabinet with an Elegant Stainless Steel Door. With two faucets, pouring your favorite Draft Beer has never been faster or easier. Two Removable Wire Shelves allow you to easily convert this Kegerator into an All-Refrigerator/Beverage Center. With 2-1/2" Casters you can move this stylish Kegerator to any room in your home, from the Kitchen, to the home bar, to the Game Room. So sit back, relax, and enjoy serving your Favorite Draft Beer with style and ease from any place in your home!

This Kegco K199SS-2 comes complete with all the necessary Draft Beer equipment you need to pour Fresh Draft Beer straight from your keg. Included with the Kegco K199SS-2 Kegerator is a 5lb Aluminum Co2 Tank, a Single Gauge Regulator with air distributor for two kegs, two "D" System Domestic Sankey Keg Couplers, and a Double Faucet Commercial Grade 15" Chrome Plated Metal Draft Beer Tower that will impress any Beer Aficionado. The Single Gauge Regulator measures Pounds Per Square Inch (PSI), features a Safety Blow Off at 55-65 PSI, and comes with a flow control inlet nipple filter as well as a permanent Quad-Ring Inlet Seal. The two Sankey Keg Couplers are designed to fit most of your favorite Domestic beer kegs. Please Note: The lightweight, 5 lb. Aluminum Co2 Tank is the preferred size of many brewers. It is shipped empty and does not come filled. You will need to get your Co2 Tank--for your Kegerator--filled locally. When filled, the 5 lb. Tank is good for approximately 5-6 Full Kegs.
This Draft Beer Dispenser is created for in home use and is both quiet and energy efficient, making the storing of your kegs in your home a more pleasant experience over and above what some other kegerators would. Though quiet and energy efficient this Kegerator has the capacity to hold 1/2 or Full-Size Kegs (15.5 gal), 1/4 Beer Barrels, and Ponie Kegs (7.75 gal).
Additional Features of this Dual-Tap Full-Size Kegco K199SS-2 Kegerator includes a Removable Drip Tray to Collect Spills, a Stainless Steel Interior floor mat for long lasting durability and easy glide of beer keg, a gas hose, beer tubing, washer, clamps, a textured serving counter top and an attractive Metal Safety Rail to help keep your beer mugs and glasses from sliding off.

This keg will hold one Full Size, Straight Pony or Quarter Slim Keg and up to two Sixth Slim, Strap Handle or Rubber Home Brew Kegs. Please Note: It will not fit Bevel or Rubber Kegs that are wider in the middle than at the top or bottom. These are commonly used by Coors and Miller Brewing Companies.
- The Kegco K199SS-2 Kegerator features a Black Cabinet with Decorative Stainless Steel Door
- This Keg dispenser comes with two complete Direct Draw Kits for D System Kegs. This Keg Tap system comes with all the commercial grade components needed to tap two domestic keg.
- Includes a brand new aluminum 5 lb. Aluminum Co2 Tank
This Tank is produced from high strength aluminum alloy 6061-T6. This is superior to a steel tank because it will not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cyldiners are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators. Average fill good for 5-6 Kegs depending upon your fill. (5.5" diameter, 18.25" Height). - Includes Single Gauge Co2 Regulator
This Regulator works with any Co2 Tank with a CGA-320 valve. Comes with an air distributor. The single gauge measures PSI indicating how much Co2 pressure is inside the keg. Adjustable output pressure 0-60 psi. 3000 psig Max Primary Inlet. 60 psig Safety Relief Valve R82. Female CGA-320 connection. Ball valve outlet w/ 5/16" OD Hose Barb connection. Total ports = (2) Primary 1/4" FNPT ports, (2) Secondary 1/4" FNPT ports. UL Listed, Compressed Gas Regulator - for use w/ Air, Co2 and Inert Gases. - Includes two of 5 feet of 5/16 Inch I.D. Draft Beer Line Assembly with 2 Snap Clamps
The standard length is 5 feet of 5/16" I.D. Blue Air/Co2 Tubing made of Themoplastic Vinyl Hose (Super Vinyl). This tubing will not rot, swell or dry out and is unaffected by normal cleaning compounds. This air line assembly comes with two Plastic Snap Clamps with a reusable clamp design. - Includes Two D system Lever Handle Keg Coupler which can Tap all Domestic Kegs
These are Commercial Grade Lever Handle Keg Couplers. The K199SS-2 is compatible with all domestic brand kegs. This Keg Tap works with all American "D" System Sankey Kegs. This coupler features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg all you have to do is pull out and then down on the lever handle to properly couple the keg. This Keg Coupler can be swapped out to a Home Brew Coupler for no additional cost. - Includes a 3" Diameter Dual Faucet Chrome Plated Metal Draft Tower
The Tower is a commercial grade Single Column, Dual Faucet, 3" Diameter, Chrome Plated Metal Draft Tower. This Tower comes complete with Two Chrome Plated Faucets with Brass Levers and 5 Feet of 3/16 Inch I.D. Clear Beer Tubing that ends in a Nozzle & Hex Nut Assembly that connects to all standard keg couplers. This Tower is mounted using the gasket and four screws that are included. - Includes Two Chrome Beer Faucets with Brass Levers
This premium quality faucet features a forged brass body with a highly polished chrome finish. This faucet has a brass shaft assembly and lever with a Teflon ball washer that ensures smooth operation. The brass lever has standard threading that is compatible with most branded tap handles. - PLEASE NOTE: Coors Kegs will not fit into this Kegerator.
- Measures at 33"H x 20"W x 25.5"D
- Reversible Door
- the Kegco K199SS-2 Beer Dispenser comes with 2 full-width wire shelves and a hole plug which allows you to convert kegerator into a Compact Refrigerator.
- Holds: 1/2 barrels / Full Size Kegs (15.5gal), 1/4 barrels / Ponies (7.75gal)
- Removable Drip Tray with Grill to Collect spills
- Chrome Guard Rail to Protect Your Mugs and Glasses from Sliding Off
- Stainless Steel Interior Floor Mat for long lasting durability and easy glide of beer keg.
- Textured Serving Counter Top.
WARRANTY INFORMATION
UPC: 608938598219
| Dimensions | |
| Height | 33" |
| Width | 20" |
| Depth | 25-1/2" |
| Warranty | |
| Labor | 1 Year |
| Parts | 1 Year |
| Compressor (Parts Only) | 5 Years |
| Key Features | |
| Built-in Capable | No |
| Security Lock | No |
| Keg Coupler | Yes |
| Regulator | Single Gauge |
| CO2 Tank | 5 lb |
| Outdoor Use | No |
| Commercial Use | No |
| Keg Storage Capacities | |
| Full Size / 1/2-Barrel | Holds 1 |
| Pony Size / 1/4-Barrel | Holds 1 |
| 1/4-Barrel Slim | Holds 1 |
| 1/6-Barrel | Holds 2 |
| 5 gal. Ball/Pin Lock Keg | Holds 2 |
| 5-Liter / Mini Keg | Holds 2 |
| Exterior | |
| Cabinet | Black |
| Drip Tray | Black Plastic |
| Guard Rail | Chrome |
| Casters | Yes |
| Draft Beer Tower | |
| Number of Faucets | 2 |
| Material | Chrome |
| Height | 15" |
| Diameter | 3" |
| Door | |
| Color / Material | Stainless Steel |
| Number of Doors | 1 |
| Door Handle | Recessed |
| Field Reversible | Yes |
| Accepts Custom Overlay Panel | No |
| Cooling System | |
| Type | Compressor |
| Front Ventilation | No |
| Controls | |
| Adjustable Thermostat | Yes |
| Digital | No |
| Electrical | |
| Electrical Requirements | 115 V, 60 Hz |
Kegco K199SS-2 Dual Faucet Kegerator with Black Cabinet and Stainless Steel Door Reviews
| Average Customer Rating: | (3) |
| (based on 1 reviews) |
| VERY tight. Worth paying for more size | |
| by: | East Lansing Basement Pub (08-18-2012) East Lansing, MI |
| Comments: | This just barely holds two 1/6 barrels with the regulator inside. (note that the regulator MUST be inside if you use two hoses because only one hose fits through from the back) it really seems worth the extra cost to get the slightly-larger cabinets. Also, tall 1/6 barrel kegs (look like Cornies, but have Sankey coupling) will fit, but only with a low-profile coupler. So be sure you know the barrel size, or you will have to drop extra $ for that (might be worth initial upgrading for one of the couplers, if possible). |
| Bottom Line: | I would not recommend this product. |
|
|
All charges are based on a quantity of 1.
Click "Add to Cart" above to change quantities and make actual ship method selection. |
|||||||
Available Options:
Top Sellers
![]() | ![]() Sale Price: $769.99 | ![]() | ![]() |







