Dual Faucet Digital Kegerator - Black Matte Cabinet and Door

Regular Price: $862.49
You Save $172.50 (20%)

Authorized Kegco DealerThese matte black Kegco K309B-2 Two-Faucet Digital Kegerators are beautiful freestanding keg dispensers that include all of the great features you enjoy from other high-quality Kegco models, now with digital temperature controls! These great features include attractive styling, a removable and easy-to-clean built-in drip tray, a chrome guard rail to prevent your mugs and glasses from sliding off the top, locking easy-roll casters, and a complete direct draw system for dispensing up to two kegs at a time. Thanks to the digital temperature controls, you now have the ability to see your specific temperature setting and set it easily with the push of a button, in addition to having a wider available temperature range for more precise temperature control.

  • Digital Temperature ControlDigital Temperature Control:
    With a digital temperature display and push button controls, it has never been easier to set and verify the internal temperature of your keg refrigerator! Simply press the up or down button, and the temperature will be adjusted by one degree, avoiding the guesswork that sometimes comes with manual dial temperature controls. The temperature can be displayed in either Fahrenheit or Celsius.

  • Internal FanFan-Forced Cooling for Super Cool Temperatures:
    Thanks to it's Fan-Forced cooling, this Kegco K309SS-2 Beer Keg Cooler has one of the coldest temperature ranges of any beer cooler on the market today. The fan helps provide even cooling throughout the unit, allowing the temperature to be set as low as 32 degrees to dispense ice cold draft beer.

  • Large CapacityLarge Interior:
    This keg beer refrigerator's interior is spacious enough to easily hold any full-size keg, including Coors kegs, Miller kegs, and rubber kegs. It can also hold up to two 5 Gallon D System kegs or up to three 5 Gallon Cornelius Ball Lock Home-Brew kegs, allowing you to dispense more than one type of beer at a time.

  • Deep ChillDeep Chill Function:
    At the push of a button, a Deep Chill function gives you the ability to quickly cool down a warm keg by forcing the compressor to work continuously for 24 hours. When your keg has reached the desired temperature, pressing Deep Chill again will return your unit to normal operation.*

  • Convertible to RefrigeratorConverts to a Refrigerator with 2 Shelves:
    We could all use a little more room in our refrigerators, and when you're not using this unit as a beer dispenser, it can easily be converted into an all-refrigerator to give you that extra storage. Two adjustable shelves are included that can be spaced far enough apart to hold 2-liter bottles or gallon jugs. With the wide temperature range available in the K309SS-2, you can even use it to store and dispense kombucha, soda or wine!

    Easy-Roll Casters
  • Locking Casters Provide Mobility:
    When it's time for that backyard BBQ, you can easily move the Kegco K309SS-2 from the kitchen to the patio to join the party! Easy-Roll Casters make it easy to move this draft beer dispenser from one location to another, and they lock so that once it's in position, it won't roll again until you want it to.

These keg beer dispensers provide you with all of the equipment you'll need to pour a cold, refreshing glass of beer straight from the keg. When you buy from the Beverage Factory you have the option to choose your keg couplers, allowing you to receive a custom setup for the type of kegs you prefer! Included in the draft beer system are the CO2 Tank, Regulator, Keg Couplers, air and beer lines, and all the fittings required to assemble the kit. Take a look at the available options below for a truly custom setup.

* - Letting the Deep Chill function run for the full 24 hours may result in freezing of the keg.

  • Kegco K309B-1MDK-309B-01 Keg Dispenser and Double-Faucet Draft Beer Dispense System
  • Includes a brand new aluminum 5 lb. Aluminum Co2 Tank
    This Tank is produced from high strength aluminum alloy 6061-T6. This is superior to a steel tank because it will not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cyldiners are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators. Average fill good for 5-6 Kegs depending upon your fill. (5.5" diameter, 18.25" Height).
  • Includes Single Gauge Co2 Regulator
    This Regulator works with any Co2 Tank with a CGA-320 valve. The single gauge measures PSI indicating how much Co2 pressure is inside the keg. Adjustable output pressure 0-60 psi. 3000 psig Max Primary Inlet. 60 psig Safety Relief Valve R82. Female CGA-320 connection. Ball valve outlet w/ 5/16" OD Hose Barb connection. Total ports = (2) Primary 1/4" FNPT ports, (2) Secondary 1/4" FNPT ports. UL Listed, Compressed Gas Regulator - for use w/ Air, Co2 and Inert Gases.
  • Includes 5 feet of 5/16 Inch I.D. Blue Air Line Assembly with 2 Snap Clamps
    The standard length is 5 feet of 5/16" I.D. Blue Air/Co2 Tubing made of Themoplastic Vinyl Hose (Super Vinyl). This tubing will not rot, swell or dry out and is unaffected by normal cleaning compounds. This air line assembly comes with two Plastic Snap Clamps with a reusable clamp design.
  • Includes Keg Couplers
    The D System Keg Couplers are selected as the default, but you can select home brew couplers at the same cost or upgrade to another type of commercial coupler for a small cost. This versatility makes this kegerator an excellent value.
  • Includes a 3" Diameter Chrome Plated Metal 2-Faucet Draft Tower
    The Tower is a commercial grade Single Column, Dual-Faucet, 3" Diameter, Chrome Plated Metal Draft Tower. This Tower comes complete with chrome plated faucets with brass levers and two 5 Foot, 3/16 Inch I.D. Clear Beer Lines that end in a Nozzle & Hex Nut Assembly that connects to all standard keg couplers. This Tower is mounted using the gasket and four screws that are included.
  • All dispensing accessories are UL recognized components
  • Converts to refrigerator 2 full-width wire shelves
  • Large enough to hold all full size kegs (Including Coors, Miller and many additional brands)
  • Holds: 1/2 barrels / Full Size Kegs (15.5gal), 1/4 barrels / Ponies (7.75gal) and 1/6 barrels (5gal)
  • Matte black cabinet and door
  • Digital temperature control keeps temperature in range of 32°F-75°F
  • An excellent unit for serving kombucha, soda or wine in addition to beer
  • Deep Chill function to quickly cool down warm keg
  • Easy roll casters for mobility
  • Removable built-in drip tray with grill to collect spills
  • Chrome guard rail to protect your mugs and glasses from sliding off
  • Stainless steel interior floor mat for long lasting durability and easy glide of beer keg
  • Plugs into standard home outlet
  • 25% more energy efficient design saves you money each month!
  • UL Listed
  • 1 year parts and labor warranty, 5 years parts only warranty on compressor and sealed system

Works with Commercial and Home Brew Kegs.

This kegerator can fit one Full Size, Pony, or Quarter Slim Keg, two 5 gallon commercial kegs along with one 5 gallon home brew keg or up to three 5 gallon home brew kegs.

Keg Capacity Chart.

UPC: 608729691846
Width23 11/16"
Depth23 15/16"
Unit Weight96.8 lbs
Shipping Weight110 lbs
Labor1 Year
Parts1 Year
Compressor (Parts Only)5 Years
Key Features
Built-in CapableNo
Security LockNo
Keg CouplerNo
RegulatorSingle gauge
CO2 TankYes
Cleaning KitNo
Outdoor UseNo
Commercial UseNo
Keg Storage Capacities
Full Size / 1/2-Barrel1
Pony Size / 1/4-Barrel1
1/4-Barrel Slim1
5 gal. Ball/Pin Lock Keg3
Drip TrayYes
Guard RailYes
Draft Beer Tower
Number of Faucets2
Color / MaterialMatte Black
Number of Doors1
Door HandleRecessed
Field ReversibleYes
Accepts Custom Overlay PanelNo
Cooling System
Defrost SystemManual
Front VentilationNo
Adjustable ThermostatYes
Electrical Requirements115 V / 60 Hz
Running Amps1.7 A
PDFInstruction Manual
PDFDispense Kit Assembly Manual
PDFParts Diagram

Dual Faucet Digital Kegerator - Black Matte Cabinet and Door Reviews

Average Customer Rating:
(based on 73 reviews) 
Very happy so far
by:Paul (06-10-2015)
Rochester, NY
Comments:After reading the reviews here I decided to purchase this unit. Delivery went well, except that the delivery driver wouldn't stay until I had checked everything over for damage (even though the Beverage Factory instructions were very clear that the driver was required to do so). Luckily no damage was found and so I started putting everything together.

I had decided to upgrade to the Perlick 650SS faucets with flow control, and to my dismay once I installed them on the tower it was clear that there was very little room available to adjust the flow control because the 3 faucets were crammed so close together. I decided not to struggle with it and instead called Beverage Factory to arrange return of the tower that comes with this unit in exchange for the T-style tower (item TTOW-3F-SS). I figured the design of the T-style tower would work better with the 650SS faucets, and I was right. I still wish the faucets were placed about an inch further apart from one another on the TTOW-3F-SS, because that would allow more room for wider tap handles. There's certainly plenty of space available to have done this, so I'm not sure why the manufacturer didn't make better use of that space? But I can live with it as-is.

One other downside to the T-style tower is that it's not insulated at all. The tower that comes with this unit had thick felt insulation inside, so I'm not sure how that was overlooked on the T-style tower? I may need to carve out some styrofoam blocks and use them to fill the empty space in the TTOW-3F-SS, or maybe stuff some felt padding in there to provide the missing insulation.

Other than that, this kegerator runs very quietly, so much so that I sometimes have to check to see if it's still running! I put it in our dining room so that it wouldn't both us if it became noisy, but it's been very quiet so far. After 6 months everything still works great. And I love the digital controls that tell me the settings at a glance!

Only other points to mention are that the included hose clamps are cheap plastic; do yourself a favor and get a set of stainless steel earless clamps, to more securely attach your hoses to the keg connectors and your regulator. Also, the chill plate on the back wall of this kegerator gets very cold, so keep your beer lines away from it or else they'll freeze solid! One of mine did just that, and I couldn't figure out why nothing was dispensing!

All in all I'd say this is a well-made appliance and customer service was very good about handling my tower exchange. Recommended!
Bottom Line:I would recommend this product.
Staff Reply:Hello Paul, thank you for your response and we are really glad to hear you have a had a good experience. Excellent choice in regards to the Perlick faucets and you are correct about the triple faucet tower not having enough space for that particular faucet. In reference to the insulating of the T-style tower I would use plumbers insulation inside that tower. Much thicker. Thanks again and we look forward to hearing from you in the future.

Carey Correia
very nice product.
by:joe (03-25-2015)
elkhart, IN
Comments:got the cooler and was very easy to set up. it is nice looking and really keeps the beer cold. there is absolutely no noise coming from it. very, very quiet. I would highly recommend this item.
Bottom Line:I would recommend this product.
Worth the extra money
by:Dan (02-21-2015)
Dallas, TX
Comments:I hate giving anything 5 stars - just looks like I am over the top. And I did have one issue - the digital temp readout would show E1 when I tried to adjust the temp, the Deep Chill would work fine though. Called and spoke to Arielle who told me it sounded like a control board - shipped me a new one and that did the trick (I volunteered to install it myself). I retain 5 stars because of how great the customer service experience was. Been running 3 months now and here are the pros: Keeps temps to the exact degree - tested with water and a digital thermometer, it is quiet - really, I got the brushed tower with the perlick faucets - it looks great, chiller plate and fan cools down the interior fast, customer support is awesome. The cons - two 1/6 kegs are tight with all the associated hoses, The CO2 tank holder does very little and will not hold the tank at all, the plastic drip tray really does not reflect the awesome quality of this unit. Tips - Get the Perlick faucets - just do it! Order a cleaning kit now - you will anyway. Prosit!
Bottom Line:I would recommend this product.
This is a great Kegerator!
by:Steve (02-09-2015)
Bigfork, MT
Comments:This Kegco Kegerator and Beverage Factory are great! Everything came exactly as they said it would without any damage. The digital temperature controls are excellent. We bought the Perlick upgrade and it also works great! We are set now, drinking craft beer from our local brewery. The price is right and we do not have bunches of empty bottles to deal with anymore. Thank you!
Bottom Line:I would recommend this product.
Excellent Kegerator, a wise purchase.
by:Jim (12-19-2014)
Oro Valley, AZ
Comments:I've had my kegerator for a couple of months, and it's great. 3 upgraded Perlick taps, polished SS tower, and dual valve regulator upgrades. Works like a charm. Well build, looks good. Nice touch having removable inset drip tray (although an option to Stainless would have been nice. The only problem (& it's not the manufacturer's fault) is that with 2 beers & a cider on tap, you tend to drink them, & that means that kegs run dry, so you have an empty tap until you brew more. I've solved that problem by having an extra keg all filled & ready to go. Now I can rotate my beers (after rinsing out the beer lines first) for variety. Now I'm in the process of carving my first custom tap handle (expect to have one for each of my brews)!
Bottom Line:I would recommend this product.
Shipping Calculator
Enter Your Shipping Zip Code:
Shipping Options
Please enter a zip code.
All charges are based on a quantity of 1.
Click "Add to Cart" above to change quantities
and make actual ship method selection.


Select Options

This product has multiple options. Please select options and then add to cart at the bottom of the page.

Image Item Qty Discount Price
Dual Faucet Digital Kegerator - Black Matte Cabinet and Door Model: KC K309B-2 20%$689.99

Confirm Options:

Default D System Keg Coupler Lever Handle (Included) +$0.00
Select Ball Lock Home Brew Keg Tap +$0.00
Select Pin Lock Home Brew Keg Tap +$0.00
Select a S System Keg Tap Coupler (Import Kegs) +$5.00
Select a U System Keg Tap Coupler (Guiness Kegs) +$25.00
Select a Perlick Lo-Boy Low Profile D System Keg Coupler +$34.95
Remove Keg Coupler from Order (No Thanks Already Have One) -$10.00

Default D System Keg Coupler Lever Handle (Included) +$0.00
Select Ball Lock Home Brew Keg Tap +$0.00
Select Pin Lock Home Brew Keg Tap +$0.00
Select a S System Keg Coupler (Import Kegs) +$5.00
Select a U System Keg Coupler (Guness Kegs) +$25.00
Perlick Lo-Boy Low Profile D System Keg Tap Coupler +$34.95
Remove Keg Coupler from Order (No Thanks Already Have One) -$10.00

SPECIFY CO2 REGULATOR CONFIGURATION (Kegerator Includes Single Gauge Regulator)
Single Gauge Regulator w/Plastic Air Distributor (Included) +$0.00
Upgrade to Pro Series 2 Product Double Gauge Regulator +$15.00
Upgrade to Premium 2 Product Dual Gauge Regulator +$17.00
Upgrade to Commercial Grade 2 Product Dual Gauge Regulator +$19.00
Remove CO2 Regulator from Order (No Thanks Already Have One) -$10.00

Chrome Plated Metal 2 Faucet Tower (Included) +$0.00
Upgrade to Polished SS 2 Faucet Tower +$15.00
Upgrade to Brushed SS 2 Faucet Tower (100% SS Contact) +$60.00
Upgrade to Stainless Steel 2 Faucet Tower w/ Perlick 630SS +$65.00
Remove Draft Tower from Order (No Thanks Already Have One) -$50.00

5 lb. Co2 Tank (Included - Comes Empty) +$0.00
Upgrade to 10 lb. Co2 Tank (May have to Place Outside Unit) +$17.95
Remove Co2 Tank from Order (No Thanks Already Have One) -$35.00

OPTIONAL CLEANING KIT (Important To Clean Lines after each Keg)
Optional CLEANING KIT! Add Economy Beer Line Cleaning Kit +$21.95
Add Beer Cleaning Kit - 1 Qt. Bottle w/ 33 oz. Cleaner +$54.99
Kegco Deluxe Hand Pump Pressurized Keg Beer Kegerator Cleaning Kit w/ 32 oz. Cleaner +$49.99
Add Complete D System Pressurized Cleaning Kit +$102.95

Optional Beer Y Splitter Fitting
Add 898B - Beer Y Fitting with 3/8 Inch Bore +$16.95

Add Residential Kegerator Cover
Kegco TX-2637 Residential Kegerator Cover +$49.99

OPTIONAL TAP HANDLE (Standard Faucet Knob is Included)
Chalkboard Beer Tap Handle +$38.95
White Board Dry Erase Beer Tap Handle +$39.95
T180-7 - Twist - 7" BOD (Branding On Demand) Tap Handle +$42.95
C150-6 - 6" BOD (Branding On Demand) Tap Handle +$15.95

Add 2 Slide-on Faucet Locks +$69.95
Add 2 Wrap Around Faucet Locks +$101.90

Brand New - Kegco 3 Gallon Strap Handle Keg +$89.99
Brand New - Kecgo 5 Gallon Strap Handle Keg +$94.99
Brand New - Kegco 5 Gallon Rubber Top Keg +$99.99
5 Gallon Ball Lock Keg - Reconditioned Beer Keg +$69.99

Add Kegco Apparel
Kegco Flexfit Mid Pro Baseball Cap 
Kegco Trucker Snap Back Hat 
Kegco Short Sleeve T-Shirt - Black 
Kegco Short Sleeve T-Shirt - White 
Kegco Long Sleeve T-Shirt - Black 
Kegco Long Sleeve T-Shirt - White 

Optional Extended Warranty
New Leaf ServicePro 1 Year Extended Warranty +$24.99
New Leaf ServicePro 3 Year Date of Purchase Warranty +$49.99
New Leaf ServicePRO 5 Year Date of Purchase Warranty +$99.99
New Leaf ServicePRO 3 Year Date of Purchase Commercial Warranty +$145.98
New Leaf ServicePRO 5 Year Date of Purchase Commercial Warranty +$281.98