Summit SBC490BIDPLTWIN 6 Cu. Ft. Built-In Full-Size Dual Faucet Kegerator- Jet Black Cabinet with Industrial Style Diamond Plate Door
With a solid construction and a striking design the SBC490BIDPLTWIN 6.4 Cu. Ft. Built-In Dual Faucet Kegerator by Summit brings an industrial style look to in home draft beer serving. This Keg Beer Dispenser features a Jet Black Cabinet with a Diamond Plate Finished Aluminum Door and Stainless Steel Handle. With its 6.4 Cu. Ft. Capacity, this Free Standing Keg Draft Dispenser accommodates half, quarter, and mini kegs. The SBC490BIDPLTWIN Kegerator comes with Two Complete "D" System Kits and all the accessories you need to pour your favorite ice cold draft beers-including a Co2 Tank. With a Dual Faucet, you can serve two different beers at the same time for you and your guests! An Adjustable Thermostat makes it easy to set the temperature at the correct setting for a perfect tap of your favorite draft. The Automatic Defrost makes maintaining your Kegerator a breeze. If you do not plan on using your Kegerator to dispense beers for a time, simply insert the included shelves and convert your Keg Beer Dispenser into a Regfriegerator. Looking for an industrial style Kegerator to bring home to your tapped draft beers? Then look no further than Summits SBC490BIDPLTWIN Dual Faucet Kegerator.
This Summit SBC490BIDPLTWIN comes complete with all the necessary Draft Beer equipment you need to pour Fresh Draft Beer straight from your Keg(s). Included with the Summit SBC490BIDPLTWIN Dual Faucet Kegerator is a 5lb Aluminum Co2 Tank, a Single Gauge Regulator, Sankey Keg Couplers, and a 15" Chrome Plated Metal Draft Beer Tower that will impress any Beer Aficionado. The Single Gauge Regulator measures Pounds Per Square Inch (PSI), features a Safety Blow Off at 55-65 PSI, and comes with a flow control inlet nipple filter as well as a permanent Quad-Ring Inlet Seal. The Sankey Key Couplers are designed to fit most of your favorite Domestic Beer Kegs.
Additional Features of this SBC490BIDPLTWIN Dual Faucet Built-In Kegerator by Summit include a Top Guard Rail--to reduce spills and neaten your service area, as well as Casters for easy portability of your Kegerator.
This kegerator can fit one Full Size or Pony Keg, up to two Quarter Slim Kegs, and up to three 5 gallon kegs.
This Tank is produced from high strength aluminum alloy 6061-T6. This is superior to a steel tank because it will not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cyldiners are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators. Average fill good for 5-6 Kegs depending upon your fill. (5.5" diameter, 18.25" Height).
This Regulator works with any Co2 Tank with a CGA-320 valve. The single gauge measures PSI indicating how much Co2 pressure is inside the keg. Adjustable output pressure 0-60 psi. 3000 psig Max Primary Inlet. 60 psig Safety Relief Valve R82. Female CGA-320 connection. Ball valve outlet w/ 5/16" OD Hose Barb connection. Total ports = (2) Primary 1/4" FNPT ports, (2) Secondary 1/4" FNPT ports. UL Listed, Compressed Gas Regulator - for use w/ Air, Co2 and Inert Gases.
The standard length is 5 feet of 5/16" I.D. Blue Air/Co2 Tubing made of Themoplastic Vinyl Hose (Super Vinyl). This tubing will not rot, swell or dry out and is unaffected by normal cleaning compounds. This air line assembly comes with two Plastic Snap Clamps with a reusable clamp design.
This is a Commercial Grade Lever Handle Keg Coupler. The SBC490BIDPLTWIN is compatible with all domestic brand kegs. This Keg Tap works with all American "D" System Sankey Kegs. This coupler features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg all you have to do is pull out and then down on the lever handle to properly couple the keg. This Keg Coupler can be swapped out to a Home Brew Coupler for no additional cost.
The Tower is a commercial grade Single Column, Single Faucet, 3" Diameter, Chrome Plated Metal Draft Tower. This Tower comes complete with a Chrome Plated Faucet with Brass Lever and 5 Feet of 3/16 Inch I.D. Clear Beer Tubing that ends in a Nozzle & Hex Nut Assembly that connects to all standard keg couplers. This Tower is mounted using the gasket and four screws that are included.
These premium quality faucets feature a forged brass body with a highly polished chrome finish. This faucets have a brass shaft assembly and lever with a Teflon ball washer that ensures smooth operation. The brass lever has standard threading that is compatible with most branded tap handles.
|Compressor (Parts Only)||5 Years|
|CO2 Tank||5 lb|
|Keg Storage Capacities|
|Full Size / 1/2-Barrel||1|
|Pony Size / 1/4-Barrel||1|
|5 gal. Ball/Pin Lock Keg||3|
|5-Liter / Mini Keg||3|
|Draft Beer Tower|
|Number of Faucets||2 Faucet|
|Color / Material||Silver - Aluminum|
|Number of Doors||1|
|Door Handle||Stainless Steel Towel Bar|
|Accepts Custom Overlay Panel||No|
|Electrical Requirements||115 V AC/60 Hz|
|User Care Guide|
|Dispense Kit Assembly Manual|
Summit SBC490BIDPLTWIN 6 Cu. Ft. Built-In Full-Size Dual Faucet Kegerator- Jet Black Cabinet with Industrial Style Diamond Plate Door Reviews
|Average Customer Rating:|
|(based on 0 reviews)|
|No customer reviews available. Be the first to write a review!|
All charges are based on a quantity of 1.
Click "Add to Cart" above to change quantities
and make actual ship method selection.