Summit SBC490DPLTRIPLE 6 Cu. Ft. Freestanding Full-Size Triple Faucet Kegerator - Jet Black Cabinet with Industrial Style Diamond Plate Door

With a solid construction and a striking design the SBC490DPLTRIPLE 6 Cu. Ft. Free Standing Triple Faucet Kegerator from Summit brings an industrial style look to in home draft beer serving. This Keg Beer Dispenser features a Jet Black Cabinet with a Diamond Plate Finished Door and Stainless Steel Handle. This Kegerator can be built-in or left freestanding. With its 6.0 Cu. Ft. Capacity, this Keg Draft Dispenser accommodates half, quarter, and mini kegs. The SBC490DPLTRIPLE Kegerator comes with a 5lb Aluminum Co2 Tank and Regulator, and all the beer and air lines necessary to tap three kegs. With a Triple Faucet, you can serve up to three different beers at the same time for you and your guests! An Adjustable Thermostat makes it easy to set the temperature at the correct setting for a perfect tap of your favorite beer. The Automatic Defrost makes maintaining your Kegerator a breeze. If you do not plan on using your Kegerator to dispense beers for a time, simply insert the included shelves and convert your Keg Beer Dispenser into a Regfriegerator.

Included with the Summit SBC490DPLTRIPLE Triple Faucet Kegerator is a 5lb Aluminum Co2 Tank, a Single Gauge Regulator, air and beer lines, and a 15" Chrome Plated Metal Draft Beer Tower that will impress any Beer Aficionado. The Single Gauge Regulator measures Pounds Per Square Inch (PSI), features a Safety Blow Off at 55-65 PSI, and comes with a flow control inlet nipple filter as well as a permanent Quad-Ring Inlet Seal. The Sankey Key Couplers are designed to fit most of your favorite Domestic Beer Kegs.

Additional Features of this SBC490DPLTRIPLE Triple Faucet Kegerator by Summit include a Top Guard Rail--to reduce spills and neaten your service area, as well as Casters for easy portability of your Kegerator.

Please Note:

This kegerator can fit one Full Size or Pony Keg, up to two Quarter Slim Kegs, and up to three 5 gallon kegs.

• The Summit SBC490DPLTRIPLE Kegerator features a Black Cabinet with Decorative Stainless Steel Door and 14"mm Stainless Steel Handle
• Includes a brand new aluminum 5 lb. Aluminum Co2 Tank
  This Tank is produced from high strength aluminum alloy 6061-T6. This is superior to a steel tank because it will not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cyldiners are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators. Average fill good for 5-6 Kegs depending upon your fill. (5.5" diameter, 18.25" Height).
• Includes Single Gauge Co2 Regulator
  This Regulator works with any Co2 Tank with a CGA-320 valve. Comes with an air distributor. The single gauge measures PSI indicating how much Co2 pressure is inside the keg. Adjustable output pressure 0-60 psi. 3000 psig Max Primary Inlet. 60 psig Safety Relief Valve R82. Female CGA-320 connection. Ball valve outlet w/ 5/16" OD Hose Barb connection. Total ports = (2) Primary 1/4" FNPT ports, (2) Secondary 1/4" FNPT ports. UL Listed, Compressed Gas Regulator - for use w/ Air, Co2 and Inert Gases.
• Includes three sections of 5 feet of 5/16 Inch I.D. Draft Beer Line Assembly with 2 Snap Clamps
  The standard length is 5 feet of 5/16" I.D. Blue Air/Co2 Tubing made of Themoplastic Vinyl Hose (Super Vinyl). This tubing will not rot, swell or dry out and is unaffected by normal cleaning compounds. This air line assembly comes with six Plastic Snap Clamps with a reusable clamp design.
• Includes a 3" Diameter Triple Faucet Chrome Plated Metal Draft Tower
  The Tower is a commercial grade Single Column, Triple Faucet, 3" Diameter, Chrome Plated Metal Draft Tower. This Tower comes complete with Three Chrome Plated Faucets with Brass Levers and 5 Feet of 3/16 Inch I.D. Clear Beer Tubing that ends in a Nozzle & Hex Nut Assembly that connects to all standard keg couplers. This Tower is mounted using the gasket and four screws that are included.
• Includes Three Chrome Beer Faucets with Brass Levers
  These premium quality faucets feature a forged brass body with a highly polished chrome finish. This faucet has a brass shaft assembly and lever with a Teflon ball washer that ensures smooth operation. The brass lever has standard threading that is compatible with most branded tap handles.
• Full-sized beer dispenser - Accepts half, quarter, and mini kegs
• Triple tap system - Three taps allow you to serve three different brews from mini kegs
• Fully finished black cabinet - Allows the beer dispenser to be used freestanding
• Diamond plate finish on door - Textured aluminum wrapping offers a modern industrial look
• Convertible to a refrigerator - Transform the beer cooler into a standard refrigerator
• Automatic defrost - Simplify appliance care by letting the unit defrost itself
• Adjustable thermostat - Manage the interior temperature with ease and accuracy
• Casters included (ship unassembled) - To make the beer dispenser portable, install this sturdy set of casters to the base of the unit
• 115 volts/60 cycle
• Top guard rail (ships unassembled) - Install this silver rail on top to reduce spills and neaten service
• Product Dimensions: 53.38"H x 23.63"W x 24.88"D
• 100% CFC free - Environmentally friendly design without ozone-damaging chemicals