Summit SBC490SSHVTRIPLE Triple Faucet Kegerator with 14-mm Dia Handle and Stainless Door

Looking for a stylish Keg Beer Dispenser to serve and Pour your favorite Keg Beers From? Not wanting to choose between your three favorite drafts? Then look no further than this SBC490SSHVTRIPLE Triple Faucet Kegerator by Summit. This Draft Beer Dispenser features a Jet Black Cabinet with a Stainless Steel Wrap Door and a Sleek Thin Stainless Steel Handle. From the Kitchen to the Home Bar, move this Elegant Kegerator with ease with the provided Casters that allow for easy portability. Not only does this SBC490SSHVTRIPLE Draft Dispenser have style, it also has functionality with its ability to house half, quarter, and mini (pony) kegs and offers you the ability to serve three different beers at once. This SBC490SSHVTRIPLE Kegerator comes with a 5lb Aluminum Co2 Tank and Regulator, and all the beer and air lines necessary to tap three kegs. With an Automatic Defrost that reduces user maintenance by eliminating the need to defrost the unit, as well as an adjustable thermostat, your Kegerator will be easy to maintain and to keep at perfect temperature for a perfect ice cold pour. If you do not plan on using your Kegerator for a time, instead of unplugging it and having it take up space in your home, you can easily convert your Kegerator into a Refrigerator simply by inserting the two included shelves into the Kegerator.

Included with the Summit SBC490SSHVTRIPLE Kegerator is a 5lb Aluminum Co2 Tank, a Single Gauge Regulator, air and beer lines, and a 15" Chrome Plated Metal Draft Beer Tower that will impress any Beer Aficionado. The Single Gauge Regulator measures Pounds Per Square Inch (PSI), features a Safety Blow Off at 55-65 PSI, and comes with a flow control inlet nipple filter as well as a permanent Quad-Ring Inlet Seal. Please Note: The lightweight, 5lb Aluminum Co2 Tank is the preferred size of many brewers. It is shipped empty and does not come filled. You will need to get your Co2 Tank--for your Kegerator--filled locally. When filled, the 5 lb tank is good for approximately 5-6 full kegs.

Please Note: If installing this unit under a counter, you will need 2 inches of Clearance around the back and the sides.

This kegerator can fit one Full Size or Pony Keg, up to two Quarter Slim Kegs, and up to three 5 gallon kegs.

• The Summit SBC490SSHVTRIPLE Kegerator features a Black Cabinet with Decorative Stainless Steel Door and 14"mm Stainless Steel Handle
• Includes a brand new aluminum 5 lb. Aluminum Co2 Tank
  This Tank is produced from high strength aluminum alloy 6061-T6. This is superior to a steel tank because it will not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cyldiners are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators. Average fill good for 5-6 Kegs depending upon your fill. (5.5" diameter, 18.25" Height).
• Includes Single Gauge Co2 Regulator
  This Regulator works with any Co2 Tank with a CGA-320 valve. Comes with an air distributor. The single gauge measures PSI indicating how much Co2 pressure is inside the keg. Adjustable output pressure 0-60 psi. 3000 psig Max Primary Inlet. 60 psig Safety Relief Valve R82. Female CGA-320 connection. Ball valve outlet w/ 5/16" OD Hose Barb connection. Total ports = (2) Primary 1/4" FNPT ports, (2) Secondary 1/4" FNPT ports. UL Listed, Compressed Gas Regulator - for use w/ Air, Co2 and Inert Gases.
• Includes three sections of 5 feet of 5/16 Inch I.D. Draft Beer Line Assembly with 2 Snap Clamps
  The standard length is 5 feet of 5/16" I.D. Blue Air/Co2 Tubing made of Themoplastic Vinyl Hose (Super Vinyl). This tubing will not rot, swell or dry out and is unaffected by normal cleaning compounds. This air line assembly comes with six Plastic Snap Clamps with a reusable clamp design.
• Includes a 3" Diameter Triple Faucet Chrome Plated Metal Draft Tower
  The Tower is a commercial grade Single Column, Triple Faucet, 3" Diameter, Chrome Plated Metal Draft Tower. This Tower comes complete with Three Chrome Plated Faucets with Brass Levers and 5 Feet of 3/16 Inch I.D. Clear Beer Tubing that ends in a Nozzle & Hex Nut Assembly that connects to all standard keg couplers. This Tower is mounted using the gasket and four screws that are included.
• Includes Three Chrome Beer Faucets with Brass Levers
  These premium quality faucets feature a forged brass body with a highly polished chrome finish. This faucet has a brass shaft assembly and lever with a Teflon ball washer that ensures smooth operation. The brass lever has standard threading that is compatible with most branded tap handles.
• Full-sized beer dispenser
• Automatic Defrost
• Professional Vertical Stainless Steel Handle
• Includes CO2 tanks and regulator
• Accepts half/quarter/mini kegs
• Converts to a refrigerator
• Removable shelves
• Adjustable thermostat
• 100% CFC Free
• Energy Efficient Design
• 115 volts/60 cycle
• 3 prong plug
• U.L. approved
• Product Dimensions: 53.38"H x 23.63"W x 24.88"D
• 1 year parts and labor plus 5 year compressor limited warranty