Enjoy your home crafted beers in the same quality draft beer dispenser the pros use! The Kegco HBK1XB-1K Commercial Grade kegerator is outfitted with a pre-configured draft kit that is specifically designed to dispense from ball lock Cornelius kegs. We've taken the guesswork out of choosing each part and selected quality components that would normally be upgrades but included them at no extra charge. The polished stainless steel draft tower along with Kegco's Commercial Grade Double Gauge Regulator and 5 lb. Aluminum CO2 tank with corrosion resistant glossy red finish represent a $25 value. Even the 5 Gallon Ball Lock Homebrew Keg with Rubber handles is included at a discount, ensuring you have everything you need to dispense your own recipe.
Manual Temperature Control
Easily set the temperature with a manual dial inside the cabinet
An interior fan provides rapid cool down and ensures consistent temperatures
Blower Hose for Air-Cooled Tower
Keep the beer line cooled all the way up to the back of the faucet
Knockout for external CO2 Tank mount
Use a larger tank or save room inside the cabinet by mounting the tank outside
Drip Tray Drain Receptacle
Any spills from the faucet are directed into this bottle for quick and easy cleaning
Behind these walls lies foamed in place polyurethane insulation to maintain steady temps
Diamond Plate Floor
This durable plating can withstand the punishment of frequent keg changes
The HBK1XB-1K features heavy-duty steel construction inside and out, with a diamond plate floor that can withstand frequent keg changes and a stainless steel top with a built-in drip tray that conveniently drains into a receptacle inside the cabinet. A tough 1/7 hp compressor provides cooling, while an interior fan helps with rapid cooldown and a blower hose directs cool air into the tower to ensure your beer is cold all the way up to the faucet. Locking casters allow you to easily move the beer dispenser from place to place and keep it stable once in position.
- Includes a brand new 5 lb. Aluminum CO2 Tank with Electric Red Epoxy Finish
This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. It features an eye-catching glossy powder coated epoxy finish in Electric Red that acts as an extra layer of protection against corrosion and wear. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators. An average fill is good for 5-6 kegs depending upon your fill.
- Includes Commercial Grade Double Gauge CO2 Regulator
This regulator works with any CO2 tank with a CGA-320 valve. The top gauge measures PSI, indicating how much CO2 pressure is inside of the keg. The side gauge measures the remaining volume of CO2 in the tank, so you'll know when it's about time to get the tank filled. This regulator features a T-style adjustment valve that can be adjusted by hand, eliminating the need for a screwdriver.
- Includes 5 feet of 5/16 Inch I.D. Blue Air Line Assembly with 2 Worm Drive Clamps
This 5 foot length of 5/16" I.D. Blue Air/CO2 Tubing is made of Thermoplastic Vinyl Hose (Super Vinyl). It will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. This air line assembly comes with two durable stainless steel worm drive clamps that can be easily installed or removed with a flat head screwdriver.
- Includes Ball Lock Home Brew Keg Tap Complete Set
This complete ball lock home brew keg tap set includes both a gas in and beer out coupler for easy tapping of ball lock Cornelius Pepsi kegs. The gas in has a 1/4" nut and 5/16" hose barb already attached for easy connection to the air line. The beer out connector has a 3/16" hose barb that connects to the 3/16" beer line.
- Includes a 3" Diameter Polished Stainless Steel Draft Tower
This NSF-approved tower is a 3" diameter single faucet metal draft tower made of polished stainless steel. It comes complete with a chrome plated faucet with brass lever and 5 feet of 3/16 inch I.D. clear beer tubing. This tower is mounted using the gasket and four screws that are included.
- Includes Brand New 5 Gallon Ball Lock Home Brew Keg
Made of durable and sanitary 304 grade stainless steel, this Cornelius Pepsi keg has a permanently molded rubber bottom skirt and handles for easy carrying. The ball lock fittings can be easily accessed for cleaning and maintenance, and the stainless steel lid fastens tightly to the body and includes a pressure release valve.
- All dispensing accessories are UL recognized components
- Continuous Cold Air Channeled Through Tower to Ensure Cold Product
- Heavy-Duty Stainless Steel Top
- Built-In Drip Tray with Drain
- Stainless Steel Interior Walls and Ceiling
- Diamond plate floor in cabinet interior
- Magnetic Gasket Provides Positive Door Sealing
- Self-Closing Door with Lock
- Refrigeration System Utilizes Ozone Friendly R134a Refrigerant
- CFC-Free Foamed-in-Placed Polyurethane Insulation
- Knockout for Remote CO2 or Nitrogen Tank
- Black Finish
- ETL abd ETL Sanitation Listed for Commercial Use
|Unit Weight||143 lbs|
|Shipping Weight||187 lbs|
|Compressor (Parts Only)||5 Years|
|Keg Storage Capacities
|Full Size / 1/2-Barrel||Holds 1|
|Pony Size / 1/4-Barrel||Holds 1|
|1/4-Barrel Slim||Holds 2|
|5 gal. Ball/Pin Lock Keg||Holds 3|
|Draft Beer Tower
|Number of Faucets||1|
|Color / Material||Black|
|Number of Doors||1|
|Accepts Custom Overlay Panel||No|
|Electrical Requirements||115V / 60 HZ|
Single Tap Commercial Grade Home Brew Kegerator with Keg - Black Reviews
|Average Customer Rating:|
|(based on 0 reviews)|| |
All charges are based on a quantity of 1.
Click "Add to Cart" above to change quantities
and make actual ship method selection.