Summit SBC490BISSTBTRIPLE Triple Faucet Built-in Kegerator - Jet Black Cabinet with a Stainless Steel Door and Handle
Have the feeling of a pub right in your own home with this SBC490BISSTBTRIPLE Triple Faucet Kegerator by Summit. With Summit's SBC490BISSTBTRIPLE Full-Sized Triple Faucet Built-In Kegerator you can bring all of your favorite Draft Beer Home to be tapped and served in no time. With a Jet Black Cabinet and Beautifully Designed Stainless Steel Framed Door with a curved Stainless Steel Handle, this Kegerator is sure to fit any decor in your home with style and class. This Keg Beer Dispenser is designed for freestanding use and accommodates all tastes with three different drafts from a triple faucet tower. This Kegerator houses Half, Quarter, and Mini Kegs. The SBC490BISSTBTRIPLE Keg Cooler comes with a 5lb Aluminum Co2 Tank and Regulator, and all the beer and air lines necessary to tap three kegs. Just under 24 inches in width the SBC490BISSTBTRIPLE will fit into a 24" Wide Space. Easily convert your Kegerator into a Refrigerator--when you are not cooling a Keg or Kegs--simply by inserting 2 adjustable shelves into the 6.0 Cu. Ft. Capacity Compartment area.
Included with the Summit SBC490BISSTBTRIPLE Kegerator is a 5lb Aluminum Co2 Tank, a Single Gauge Regulator, air and beer lines, and a 15" Chrome Plated Metal Draft Beer Tower that will impress any Beer Aficionado. The Single Gauge Regulator measures Pounds Per Square Inch (PSI), features a Safety Blow Off at 55-65 PSI, and comes with a flow control inlet nipple filter as well as a permanent Quad-Ring Inlet Seal. Please Note: The lightweight, 5lb Aluminum Co2 Tank is the preferred size of many brewers. It is shipped empty and does not come filled. You will need to get your Co2 Tank--for your Kegerator--filled locally. When filled, the 5 lb tank is good for approximately 5-6 full kegs.
Please Note: This Kegerator is not designed to accept three 1/6 Kegs.
This kegerator can fit one Full Size or Pony Keg, up to two Quarter Slim Kegs, and up to three 5 gallon kegs.
- The Summit SBC490BISSTBTRIPLE Kegerator features a Black Cabinet with Decorative Stainless Steel Door
- Includes a brand new aluminum 5 lb. Aluminum Co2 Tank
This Tank is produced from high strength aluminum alloy 6061-T6. This is superior to a steel tank because it will not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cyldiners are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators. Average fill good for 5-6 Kegs depending upon your fill. (5.5" diameter, 18.25" Height).
- Includes Single Gauge Co2 Regulator
This Regulator works with any Co2 Tank with a CGA-320 valve. Comes with an air distributor. The single gauge measures PSI indicating how much Co2 pressure is inside the keg. Adjustable output pressure 0-60 psi. 3000 psig Max Primary Inlet. 60 psig Safety Relief Valve R82. Female CGA-320 connection. Ball valve outlet w/ 5/16" OD Hose Barb connection. Total ports = (2) Primary 1/4" FNPT ports, (2) Secondary 1/4" FNPT ports. UL Listed, Compressed Gas Regulator - for use w/ Air, Co2 and Inert Gases.
- Includes three sections of 5 feet of 5/16 Inch I.D. Draft Beer Line Assembly with 2 Snap Clamps
The standard length is 5 feet of 5/16" I.D. Blue Air/Co2 Tubing made of Themoplastic Vinyl Hose (Super Vinyl). This tubing will not rot, swell or dry out and is unaffected by normal cleaning compounds. This air line assembly comes with two Plastic Snap Clamps with a reusable clamp design.
- Includes a 3" Diameter Triple Faucet Chrome Plated Metal Draft Tower
The Tower is a commercial grade Single Column, Triple Faucet, 3" Diameter, Chrome Plated Metal Draft Tower. This Tower comes complete with Three Chrome Plated Faucets with Brass Levers and 5 Feet of 3/16 Inch I.D. Clear Beer Tubing that ends in a Nozzle & Hex Nut Assembly that connects to all standard keg couplers. This Tower is mounted using the gasket and four screws that are included.
- Includes Three Chrome Beer Faucets with Brass Levers
These premium quality faucets feature a forged brass body with a highly polished chrome finish. This faucet has a brass shaft assembly and lever with a Teflon ball washer that ensures smooth operation. The brass lever has standard threading that is compatible with most branded tap handles.
- Product Dimensions: 34.5"H x 23.63"W x 24.88"D
- 6.4 Cu. Ft. Capacity
- U.L. Listed
- Black door and black leather-like top
- Accepts half; quarter; or mini kegs
- Built-In Capable
- Automatic defrost
- Converts to a refrigerator with shelves included
- Stainless Steel Bottom Tray
- Adjustable thermostat
- 100% CFC Free
- Energy efficient design
- 115 Volts; 60 cycle; 3 prong plug
|Unit Weight||125 lbs|
|Compressor (Parts Only)||5 Years|
|CO2 Tank||5 lb|
|Keg Storage Capacities|
|Full Size / 1/2-Barrel||1|
|Pony Size / 1/4-Barrel||1|
|5 gal. Ball/Pin Lock Keg||3|
|5-Liter / Mini Keg||3|
|Draft Beer Tower|
|Number of Faucets||3|
|Color / Material||Stainless Steel|
|Number of Doors||1|
|Door Handle||Stainless Steel|
|Accepts Custom Overlay Panel||No|
|Electrical Requirements||112 V / 60 Hz|
|Running Amps||1.7 A|
|User Care Guide|
|Dispense Kit Assembly Manual|
Summit SBC490BISSTBTRIPLE Triple Faucet Built-in Kegerator - Jet Black Cabinet with a Stainless Steel Door and Handle Reviews
|Average Customer Rating:|
|(based on 0 reviews)|
|No customer reviews available. Be the first to write a review!|
All charges are based on a quantity of 1.
Click "Add to Cart" above to change quantities
and make actual ship method selection.
Sale Price: $1,229.00