Kegco Three Keg Homebrew Party Kegerator Kit - Ball Lock

Regular Price: $428.74
You Save $85.75 (20%)
$342.99

Give your guests more options than ever with the Kegco Three Keg Homebrew Party Kegerator Kit, which allows you to dispense up to three ball lock homebrew kegs full of fresh tasting cold draft beer at a time. Because this setup uses no shanks or towers, there is no drilling through a refrigerator and no installation required. All you need is a refrigerator large enough to hold three ball lock Cornelius Pepsi kegs, and you'll be ready to impress your guests with a variety of delicious home brew beers! Unlike traditional party pumps, this system uses CO2 to dispense your beer, so it will not go flat if it isn't finished in one night. For superior performance, Kegco has filled this kit with high quality commercial grade parts that have been designed and built to last.


Pro Series Dual Gauge RegulatorPro Series Dual Gauge Regulator:
Easily measure PSI and Co2 volume and adjust Co2 output pressure using this pro series dual gauge regulator packed with premium features! The chrome plated brass body has a large pressure adjustment knob for easy use, and includes both a manual pressure release valve and an integral tamper-proof safety pressure relief valve that releases at 45-psi.

Aluminum Three-Way Air DistributorAluminum Three-Way Air Distributor:
45° Aluminum Air Distributor. The one-piece body and mounting bracket allows for easy installation and provides adequate space when changing the air line.NADS recommends whenever CO2 gas is used to dispense drought beer, a minimum of two safety relief valves must be installed in the system, in order to prevent personal injury and/or property damage, should over-pressurization occur.

Ball Lock Home Brew Keg Tap Complete SetThree Complete Sets of Ball Lock Home Brew Keg Taps:
These complete ball lock home brew keg tap sets include both a gas in and beer out coupler for easy tapping of ball lock Cornelius Pepsi kegs. The gas in comes with a 1/4" nut and 5/16" hose barb already attached, allowing you to quickly connect it to the same size air line that standard draft beer regulators use. The beer out connector has a 3/16" hose barb that connects to standard 3/16" beer line.

Party FaucetParty Faucet Assembly:
This is a black plastic party pump squeeze faucet with five feet of black 3/16" I.D. beer line. This is the faucet you see installed on all picnic keg pumps. The beer line attaches to the hose nipple on the liquid out coupler and is held in place by a clamp.


Reconditioned KegThree Reconditioned Kegs:
These are 5 Gallon Used Stainless Steel Ball Lock Soda Kegs with rubber handles and bottom skirts. We have rinsed and pressure tested them to hold pressure, however, they are not new should been cleaned and sanitized before use. New O-Ring Set Included!

THREE KEG HOMEBREW KEGERATOR CONVERSION KIT COMPONENTS
  • (Optional) Aluminum 5 lb Co2 Tank
    We offer the Co2 Tank as an optional kit component because many people already have one or would like a large tank size. All of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank and will not rust. If you do not already have a tank, we highly recommend you take advantage of our incredible low price on brand new Co2 tanks.

  • LH-542-2 - PRO SERIES DUAL GAUGE CO2 REGULATOR
    Easily measure PSI and Co2 volume and adjust Co2 output pressure using this pro series dual gauge regulator packed with premium features! The chrome plated brass body has a large pressure adjustment knob for easy use, and includes both a manual pressure release valve and an integral tamper-proof safety pressure relief valve that releases at 45-psi.

  • 516SNP - PLASTIC REUSABLE CLAMP FOR 5/16" ID TUBING
    This easy-to-use white plastic snap clamp fits 5/16" I.D. (9/16" O.D.) vinyl hose. A tooth-locking mechanism allows you to tighten the clamp without using tools, and the semi-rigid plastic design is reusable and will not corrode over time.

  • 516BAL-5 -THREE 5 FOOT LENGTH 5/16 INCH I.D. BLUE AIR LINES
    Our brewery-approved thermoplastic vinyl beverage hose not only meets but exceeds all of the rigid demands for beer dispensing systems. The blue 5/16" I.D. beer line remains flexible and durable at recommended temperatures and pressures, is unaffected by normal cleaning compounds, and will not rot, swell, or dry out.

  • THREE PICNIC FAUCETS WITH ATTACHED 5' BLACK BEER LINES
    Three black plastic party pump squeeze faucets with five feet of black 3/16" I.D. beer line each. These are the faucets you see installed on all picnic keg pumps.

  • THREE SETS OF BALL LOCK COUPLERS
    This complete ball lock home brew keg tap set includes both a gas in and beer out coupler for easy tapping of ball lock Cornelius Pepsi kegs. The gas in comes with a 1/4" nut and 5/16" hose barb already attached, allowing you to quickly connect it to the same size air line that standard draft beer regulators use. The beer out connector has a 3/16" hose barb that connects to standard 3/16" beer line.

  • THREE RECONDITIONED 5 GALLON BALL LOCK KEGS
    These are 5 Gallon Used Stainless Steel Ball Lock Soda Kegs with rubber handles and bottom skirts. We have rinsed and pressure tested them to hold pressure, however, they are not new should been cleaned and sanitized before use. New O-Ring Set Included!

SPECIAL INSTRUCTIONS:

  • Some gas suppliers will not fill a CO2 tank, they will only exchange your CO2 tank for a full one. It is a good idea to find out what options are available in your area so that you don't buy one of our brand new high quality aluminum CO2 tanks, only to have it swapped out for a rusty old steel tank. If you are unsure where to get a tank filled in your area, you can try asking a local beer distributor or doing a local search for fire extinguishers and fire safety equipment. Companies that refill fire extinguishers are generally willing to fill a CO2 cylinder.
  • All additional technical questions can be handled by one of our friendly technical support staff by calling toll free 1-800-710-9939.

UPC: 608938444349

Kegco Three Keg Homebrew Party Kegerator Kit - Ball Lock Reviews

Average Customer Rating:
(0)
(based on 0 reviews) 
No customer reviews available. Be the first to write a review!
 
Shipping Calculator
Enter Your Shipping Zip Code:
Shipping Options
Please enter a zip code.
All charges are based on a quantity of 1.
Click "Add to Cart" above to change quantities
and make actual ship method selection.

 

Select Options

This product has multiple options. Please select options and then add to cart at the bottom of the page.

Image Item Qty Discount Price
Kegco Three Keg Homebrew Party Kegerator Kit - Ball Lock Model: BF 3SHPCK-BALL 20%$342.99

Confirm Options:

Review and Confirm Options below to Continue to Checkout
Optional CLEANING KIT!
No Cleaning Kit Added +$0.00
Economy Beer Line Cleaning Kit +$25.95
Beer Cleaning Kit - 1 Qt. Bottle w/ 4 oz. Cleaner +$49.95
Beer Cleaning Kit - 1 Qt. Bottle w/ 33 oz. Cleaner +$54.99
Beer Cleaning Kit - 2 Qt. Bottle w/ 4 oz. Cleaner +$59.95
Beer Cleaning Kit - 2 Qt. Bottle w/ 33 oz. Cleaner +$64.99
Complete D System Pressurized Cleaning Kit +$119.99

Optional CO2 TANK UPGRADE
No Co2 Tank Selected +$0.00
2.5 lb. Aluminum Co2 Tank +$55.99
5 lb. Aluminum Co2 Tank +$56.95
10 lb. Aluminum Co2 Tank +$84.99
15 lb. Aluminum Co2 Tank +$94.99
20 lb. Aluminum Co2 Tank +$114.99

Optional DRIP TRAY Upgrade
No Drip Tray Selected +$0.00
DP-117 - 6" Stainless Steel Wall Mount No Drain +$27.95
DP-118D- 6" Stainless Steel Wall Mount w/Drain +$43.95
DP-721D- 6" SS Wall Mount Drip Tray w/ Drain +$114.99