Kegco Economy Tower Kegerator Conversion Kit
This Kegco Economy Tower Beer Cooler Conversion kit is the perfect solution for those who are converting a compact refrigerator or a chest freezer into a kegerator. This kit comes with brand new, high quality draft beer components and contains the parts you will need to successfully convert your compact refrigerator/freezer into a kegerator at great savings (The Co2 Tank is Extra and not included in the kit). This kit comes with a 2.5" diameter metal tower. This is the same tower that is used on commercial grade kegerators such as True and Beverage Air.
When converting a compact refrigerator it is very important to know your internal dimensions of your refrigerator with the door shut to insure that this beer cooler conversion kit will work on your compact refrigerator or chest freezer. To fit a full size keg in a refrigerator, you will need a minimum of 28" Interior Height and 17" width and depth. For a pony keg you will need 18" Interior Height and 17" width and depth. Remember to measure the depth with the door closed. When measuring the Interior Height, be sure to measure from the top of the compressor step bottom shelf. All refrigerators have a compressor step that needs to be accounted for when measuring your interior height. You can call us at (800) 710-9939 if you have any additional questions or concerns about the conversion process. We are draft beer experts and can help qualify if this kit will work for you.
Our kegerator conversion kits come complete with detailed instructions and are supported by our friendly and experienced product specialists. You can count on them for personalized attention both before and after your purchase.
KEGCO ECONOMY TOWER CONVERSION KIT COMPONENTS
- (Optional) Co2 Tank. We offer the Co2 Tank as an optional kit component because many people already have one or would like a large tank size. All of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank and will not rust. If you do not already have a tank, we highly recommend you take advantage of our incredible low price on brand new Co2 tanks.
- Includes a 2.5" Diameter Chrome Plated Metal Draft Tower
The tower is a commercial grade Single Column, Single Faucet, 2.5" Diameter, Chrome Plated Metal Draft Tower. This Tower comes complete with a Chrome Plated Faucet with Brass Lever and 5 Feet of 3/16 Inch I.D. Clear Beer Tubing that ends in a Nozzle & Hex Nut Assembly that connects to all standard keg couplers. This Tower is mounted using the gasket and four screws that are included.
- Includes Kegco Premium Pro Series Single Gauge Co2 Regulator
This Regulator works with any Co2 Tank with a CGA-320 valve. The single gauge measures PSI indicating how much Co2 pressure is inside the keg. Adjustable output pressure 0-60 psi. 3000 psig Max Primary Inlet. 60 psig Safety Relief Valve R82. Female CGA-320 connection. Ball valve outlet w/ 5/16" OD Hose Barb connection. Total ports = (2) Primary 1/4" FNPT ports, (2) Secondary 1/4" FNPT ports. UL Listed, Compressed Gas Regulator - for use w/ Air, Co2 and Inert Gases.
- Includes 5 feet of 5/16 Inch I.D. Draft Beer Line Assembly with 2 Snap Clamps
The standard length is 5 feet of 5/16" I.D. Blue Air/Co2 Tubing made of Themoplastic Vinyl Hose (Super Vinyl). This tubing will not rot, swell or dry out and is unaffected by normal cleaning compounds. This air line assembly comes with two Plastic Snap Clamps with a reusable clamp design.
- Includes a US Sankey Wing Handle D System Keg Coupler
This high quality wing handle keg coupler (keg tap) is compatible with all domestic brand kegs. This coupler works with all domestic "D" system sankey kegs. This coupler features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg all you have to do is push down and turn to properly couple the keg.
- Comes with black ABS plastic Faucet Knob.
- 1 Fiber Washer that is placed between regulator and Co2 Tank. This washer is optional. You can pick up additional washers when you get you tank filled.
- 1 Neoprene Washer that is placed between keg coupler and beer line assembly. The purpose of this washer is stop any beer from leaking out the top of the keg coupler.
- Standard Specialty Faucet Wrench
This specialty faucet is used to connect the shank to the faucet. To properly tighten the faucet to the shank without leakage, requires this wrench that hooks into the holes on tightening colar. This faucet wrench is needed to remove faucet for cleaning or if you are switching to a stout faucet.
- Detailed Instruction/Installation Manual.
- All additional technical questions can be handled by one of our friendly technical support staff by calling toll free 1-800-710-9939.
Kegco Economy Tower Kegerator Conversion Kit Reviews
|Average Customer Rating:|
|(based on 1 reviews)|
|Way better than its price indicates|
|Comments:||I will start by saying that I've never owned a kegerator much less build one. I decided to build a 9 foot L-shaped bar and figured having a built in tap would be the ultimate in home bar enjoyment. |
Wow was I right.
I will start by saying I used a kenmore wine cellar model #99619 as my fridge. I read a lot of reviews on it and figured it would get cold enough to do the job, and it was the only low cost fridge that didn't have a freezer component.
Enough about the fridge, that's not why you're reading.
I was able to install the tower into my bar top effortlessly thanks to the hardware that was provided. All I had to do was drill a 1.25" hole through the bar top and 4 3/16" holes for the screw mounts. They provide ample length screws and 5 feet of tubing which already has the ends crimped on, so all I had to do was thread the tubing through the hole and into the hole I made in the top of the fridge.
For the record, I bought the optional 5 pound CO2 tank as well as the drip pan, and it was money well spent for this particular project. The CO2 tank fit perfectly next to the keg in the fridge with all the tubing, and the entire assembly process took me about 20 minutes.
I can't say enough good things about this kit. It looks sharp, it pours great and though I haven't had it long enough to have to clean it, I'm betting it will be a snap to disassemble.
As I've been writing this I've been trying to think of something negative to say about this product, but I can't find a single thing. Maybe someone who has more experience with building kegerators may find some fault, but I can't find any.
I highly recommend this kit to anyone who wants to make their homemade bar look more professional. I'm not the type of person to even write reviews, but this product deserves a good one.
|Bottom Line:||I would recommend this product.|
All charges are based on a quantity of 1.
Click "Add to Cart" above to change quantities
and make actual ship method selection.
Sale Price: $199.99
Sale Price: $139.99
Sale Price: $78.50
Sale Price: $57.95