Kegco Two Keg Tower Homebrew Kegerator Conversion Kit - Ball Lock

The Kegco 2SHTCK-BLK Two Keg Tower Mount Homebrew Kegerator Kit is perfect for the homebrewer in your life. This kit will come with beer parts you will need to successfully convert your refrigerator into a two keg draft beer dispenser for homebrew kegs. The Kegco brand always feature high quality draft beer parts that are designed and built to last. The beautiful Polished Stainless Steel Tower mounts to the top of your refrigerator or countertop for that home bar look. Rather than purchase new, expensive kegs, this kit includes two Reconditioned 5 Gallon Ball Lock Homebrew Kegs for you to craft your own homemade brews. (The Co2 Tank is Extra and not included in the kit).

The Kegco 2SHTCK-BLK Kegerator Conversion Kit includes two Used Reconditioned 5 Gallon Ball Lock Homebrew Kegs for your homemade brews, a beautiful Double Faucet Polished Stainless Steel Tower for dispensing two beers at once, a durable Commercial Commercial Double Gauge Co2 Regulator with Air Splitter, and even an extra set of O-Rings to make your kegs function like new. Our kegerator conversion kits come complete with detailed instructions and are supported by our friendly and experienced product specialists. You can count on them for personalized attention both before and after your purchase. All additional technical questions can be handled by one of our friendly technical support staff by calling toll free 1-800-710-9939.

• (Optional) Co2 Tank. We offer the Co2 Tank as an optional kit component because many people already have one or would like a large tank size. All of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank and will not rust. If you do not already have a tank, we highly recommend you take advantage of our incredible low price on brand new Co2 tanks.
• Two Reconditioned 5 Gallon Ball Lock Homebrew Keg Used
  These used 5 gallon soda kegs are perfect for dispensing your own home brewed beer, soda, or cider. Made of all stainless steel, they are great for any sanitary liquid storage and dispensing needs. All our 5 gallon kegs are in used condition. We have cleaned them and pressure tested them to hold pressure, however, they are not new, and as such, they will have dings, dents, scrapes and may even still smell a little like soda. You should definitely give these tanks a good cleaning and sanitizing before using them. While they are guaranteed to hold pressure, you may still need to or want to replace gaskets, poppets, etc. You can purchase replacement parts and gaskets separately.
• Includes a 3" Diameter Double Faucet Polished Stainless Steel Beer Tower
  The tower is a high quality, commercial grade Single Column, Double Faucet, 3" Diameter, Polished Stainless Draft Tower that allows you to draft two beers at once. This Tower comes complete with two Chrome Plated Faucets with Brass Levers and 5 Feet of 3/16 Inch I.D. Clear Beer Tubing that ends in a Nozzle & Hex Nut Assembly that connects to all standard keg couplers. This Tower is mounted using the gasket and four screws that are included.
• Includes Premium Pro Series Double Gauge Co2 Regulator with Air Splitter
  This premium pro series double gauge regulator is built with high end features! The premium pro series regulator works with any Co2 Tank with a CGA-320 valve and measures PSI, as well as the volume of the Co2 gas in the Cylinder. The second gauge indicates how much Co2 is left in the cylinder and when it should be refilled. The large turn knob in the center is used to easily adjust the output pressure. The built-in Co2 splitter has two sht off valves, allowing you to run your air lines directly to each coupler and shut off a side if you are not using it.
• Includes Two Sections of 5 feet of 5/16 Inch I.D. Draft Air Line Assembly with 2 Snap Clamps
  The standard length is 5 feet of 5/16" I.D. Blue Air/Co2 Tubing made of Themoplastic Vinyl Hose (Super Vinyl). This tubing will not rot, swell or dry out and is unaffected by normal cleaning compounds. This air line assembly comes with two Plastic Snap Clamps with a reusable clamp design.
• Includes Two Sets of Ball Lock Home Brew Keg Connectors for Ball Lock Kegs
  This is a set of Ball Lock Home Brew Keg Connectors. This set includes both a gas in and beer out coupler that works with a ball lock Cornelius pepsi kegs. The Gas in features a 1/4" thread for a flare fitting. This connector already has attached the special 1/4" nut that has a 5/16" hose barb attached. The larger hose barb makes it connect to the same size air line that standard draft beer regulators use. The Beer out connector has a 3/16" hose barb that connects to standard 3/16" beer line.
• Includes Two Chrome Beer Faucets with Brass Lever
  This premium quality faucet features a forged brass body with a highly polished chrome finish. This faucet has a brass shaft assembly and lever with a Teflon ball washer that ensures smooth operation. The brass lever has standard threading that is compatible with most branded tap handles.
• Comes with Two Black ABS plastic Faucet Knob.
• Extra Set of New O-Rings for Ball Lock Keg
• Heavy Duty Specialty Faucet Wrench

This specialty faucet is used to connect the shank to the faucet. To properly tighten the faucet to the shank without leakage, requires this wrench that hooks into the holes on tightening colar. This faucet wrench is needed to remove faucet for cleaning or if you are switching to a stout faucet.
• Detailed Instruction/Installation Manual.
• All additional technical questions can be handled by one of our friendly technical support staff by calling toll free 1-800-710-9939.