Kegco Standard Two Keg Tower DIY Kegerator Conversion Kit

Model: SDTCK
13 Reviews
$240.00SAVE 30% - $72.00
$168.00

+ FREE SHIPPING

90 Day Money Back Guarantee
IN STOCK (usually ships within 24 hours)
  • Kegco 542-2 Pro Series two product dual gauge regulator has two shut off valves to pressurize two kegs at once
  • Metal lever handle Kegco KT85D-L "D" system keg couplers easily tap all North American store bought kegs
  • Kegco D4743DT 3" diameter air-cooled draft beer tower is sure to look great on your own kegerator
  • Includes hoses, fittings, faucet wrench and faucet knobs to complete your conversion
  • Note: CO2 tank is optional add on and shown for reference purposes
DESCRIPTION
FEATURES
INFO & GUIDES
REVIEWS
Q&A

Dispense up to two kegs of delicious cold draft beer from your very own kegerator with Kegco's Standard Dual Keg Kegerator Conversion Kit! This kit comes with all of the high quality commercial-grade parts you'll need to successfully convert your refrigerator or freezer into a two product beer dispenser, including a pro series double gauge regulator for safe and easy CO2 management and a durable lever handle American D system Sankey coupler with an easy-to-use design. Putting the finishing touches on your new kegerator is a sleek 3" diameter double faucet chrome plated draft tower with two matching chrome plated faucets, which gives your kegerator a stylish look that is sure to impress your friends! This kit was designed to dispense 2 full size kegs, 2 pony kegs, 2 six gallon kegs, or any combination your choose, depending on your refrigerator's capacity.

Two Faucet Chrome Draft Beer Tower3" Diameter, Two Faucet Chrome Plated Draft Beer Tower:
Found on many commercial grade kegerators, this 3" diameter air-cooled draft beer tower is sure to look great on your own kegerator. It comes complete with two NSF Approved chrome plated metal faucets with brass levers and two black ABS plastic faucet knobs. Two 5' lengths of 3/16" I.D. beer line extend from the bottom of the tower.

Lever Handle Keg CouplersTwo Lever Handle D System Keg Couplers:
This NSF-approved commercial grade keg coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.

Pro Series Double Gauge RegulatorPro Series Double Gauge Regulator:
If you want a two product regulator with high end features but do not need to dispense your keg at different pressures, this pro series double gauge regulator with a y-splitter and two independent shut-off valves is perfect for you! It features a chrome plate brass body, two gauges to display PSI and Co2 volume, and a large, easy-to-use pressure adjustment knob. Also included are a manual pressure release valve and an integral tamper-proof safety relief valve that releases at 45-psi.

Note: CO2 tank is optional add on and shown for reference purposes

Warning WARNING: This product has Brass components. Brass alloys are known to contain trace amounts of Lead, which is known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.
KEGCO STANDARD DOUBLE FAUCET TOWER KIT COMPONENTS

  • (Optional) Aluminum 5 lb Co2 Tank
    We offer the Co2 Tank as an optional kit component because many people already have one or would like a large tank size. All of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank and will not rust. If you do not already have a tank, we highly recommend you take advantage of our incredible low price on brand new Co2 tanks.

  • LH-542-2 - PRO SERIES DOUBLE GAUGE TWO PRODUCT CO2 REGULATOR
    If you want a two product regulator with high end features but do not need to dispense your keg at different pressures, this pro series double gauge regulator with a y-splitter and two independent shut-off valves is perfect for you! It features a chrome plate brass body, two gauges to display PSI and Co2 volume, and a large, easy-to-use pressure adjustment knob. Also included are a manual pressure release valve and an integral tamper-proof safety relief valve that releases at 45-psi.

  • 516BAL-5 - TWO 5 FOOT LENGTH OF 5/16 INCH I.D. BLUE AIR LINES
    Our brewery-approved thermoplastic vinyl beverage hose not only meets but exceeds all of the rigid demands for beer dispensing systems. The blue 5/16" I.D. beer line remains flexible and durable at recommended temperatures and pressures, is unaffected by normal cleaning compounds, and will not rot, swell, or dry out.

  • 516SNP - PLASTIC REUSABLE CLAMP FOR 5/16 INCH ID TUBING
    This easy-to-use white plastic snap clamp fits 5/16" I.D. (9/16" O.D.) vinyl hose. A tooth-locking mechanism allows you to tighten the clamp without using tools, and the semi-rigid plastic design is reusable and will not corrode over time.

  • KT85D-L - TWO D SYSTEM KEG TAPS - BLACK LEVER HANDLES
    This NSF-approved commercial grade keg coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.

  • D4743DT - CHROME PLATED METAL DUAL FAUCET DRAFT BEER TOWER - 3" COLUMN
    Found on many commercial grade kegerators, this 3" diameter air-cooled draft beer tower is sure to look great on your own kegerator. It comes complete with two NSF Approved chrome plated metal faucets with brass levers and two black ABS plastic faucet knobs. Two 5' lengths of 3/16" I.D. beer line extend from the bottom of the tower. The thermoplastic vinyl beer hose reliably meets all of the demands for beer dispensing systems. It remains flexible and durable at recommended temperatures and pressures, is unaffected by normal cleaning compounds, and will not rot, swell, or dry out.

  • FWSTD - STANDARD METAL BEER FAUCET WRENCH
    This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4" length.

SPECIAL INSTRUCTIONS:

  • When converting a compact refrigerator it is very important to know your internal dimensions of your refrigerator with the door shut to insure that this beer cooler conversion kit will work on your compact refrigerator or chest freezer. To fit a full size keg in a refrigerator, you will need a minimum of 28" Interior Height and 17" width and depth. For a pony keg you will need 18" Interior Height and 17" width and depth. Remember to measure the depth with the door closed. When measuring the Interior Height, be sure to measure from the top of the compressor step bottom shelf. All refrigerators have a compressor step that needs to be accounted for when measuring your interior height.
  • Some gas suppliers will not fill a CO2 tank, they will only exchange your CO2 tank for a full one. It is a good idea to find out what options are available in your area so that you don't buy one of our brand new high quality aluminum CO2 tanks, only to have it swapped out for a rusty old steel tank. If you are unsure where to get a tank filled in your area, you can try asking a local beer distributor or doing a local search for fire extinguishers and fire safety equipment. Companies that refill fire extinguishers are generally willing to fill a CO2 cylinder.
  • All additional technical questions can be handled by one of our friendly technical support staff by calling toll free 1-800-710-9939.
  • UPC: 608938443397

09/13/2023

Works great
Steph

Quality construction

03/21/2023

Easy Conversion
tigers9472

Had wanted to convert my kegerator from single tap to double and this was exactly what I was looking for. Very easy to install

02/21/2023

sadasdasdsda
Nike Mike

best experience in my life !

09/29/2022

Perfect upgrade!
Brian

Came with everything needed to upgrade to two taps. Everyone knows two is better than one! Now I have options.

06/24/2021

VERY HAPPY
Morris

The lady that helped me with the order was AWESOME! and helpful. My double header came earlier than expected. Things are going GREAT!! All the tools to assemble were there... except a screw driver. haha. But assembly was quick, easy, and I could not be happier. Enjoying my Stella and Coors Light.

Showing Reviews 1-5 of 13
 1 2 3  
Question:
I have an existing 2 1/2" diameter single tap tower. Will this fit what I currently have or will I have to drill new holes to mount the 3" tower?
by Mike on November 18, 2018
Answer:
Yes, you would have to drill new holes to mount a 3" tower.
by Krystina on November 23, 2018
Staff Answer
Question:
Does this kit come with the shank? I will be using this to convert a single faucet kegerator to a double.
by Eric on July 08, 2020
Answer:
This kit will ship with a new dual faucet tower which you would use to replace your existing single faucet tower.
by Dakota on August 17, 2020
Staff Answer
Question:
If I were to buy this kit, could I theoretically change the tank for nitrogen and then it would function as a nitro cold brew kit?
by Michael on April 13, 2022
Answer:
You would need a nitrogen regulator and if doing nitro cold brew, a stout faucet.
by Jake on April 14, 2022
Staff Answer
Question:
Can you put champagne on one tap
by Mav on January 08, 2023
Answer:
Absolutely! But it may require additional parts. Please call into our Sales Team at 1-800-710-9939 Option 1.
by Jake on February 03, 2023
Staff Answer

Select Options & Upgrades

SELECT TOWER
SELECT FAUCET TYPE
OPTIONAL DRIP TRAY UPGRADE
Optional CO2 Tank (Required if you don't already own one)
Optional Cleaning Kit
OPTIONAL SET OF 2 FAUCET LOCKS
Optional Tap Handles
OPTIONAL 2ND KEG COUPLER (If you Plan on Tapping Import or Home Brew Kegs)
Kegco Standard Two Keg Tower DIY Kegerator Conversion Kit $240.00 SAVE 30% - $72.00 $168.00
Standard Two Keg Tower DIY Kegerator Conversion Kit
OPTIONS SUMMARY
SELECT TOWER
Chrome Plated Metal Two Faucet Tower (included)
SELECT FAUCET TYPE
Two Chrome Faucets / Brass Levers (included)
OPTIONAL DRIP TRAY UPGRADE
OPTIONAL CO2 TANK (REQUIRED IF YOU DON'T ALREADY OWN ONE)
No Co2 Tank Selected
OPTIONAL CLEANING KIT
No Cleaning Kit Added
OPTIONAL SET OF 2 FAUCET LOCKS
OPTIONAL TAP HANDLES
OPTIONAL 2ND KEG COUPLER (IF YOU PLAN ON TAPPING IMPORT OR HOME BREW KEGS)
Base Price
$168.00
Options
Total

CONNECT WITH US!

@BeverageFactory
Added to Cart

.....