Kegco Standard Guinness® Dispensing Kegerator Keg Tap Conversion Kit

Regular Price: $337.49
You Save $67.50 (20%)

The Kegco Standard Guinness® Dispensing Kegerator Keg Tap Conversion kit offers a complete solution to dispensing Guinness® draft kegs. Before you purchase this kit, you must first learn what makes pouring Guinness® different from your standard carbonated beer. The key differences a Guinness dispensing conversion kit as opposed to our standard kits is the specialty faucet, the Guinness® dispensing coupler, and the mixed gas high pressure tank.

The most complex part of dispensing Guinness® is getting a mixed gas high pressure tank that a local gas supplier will be willing to fill. You can either buy your tank locally or you can buy our high quality tank once you confirm that you can fill it with a mixed blend locally first.

Our kegerator conversion kits come complete with detailed instructions and are supported by our friendly and experienced product specialists. You can count on them for personalized attention both before and after your purchase.


  • (Optional) High Pressure Nitrogen Tank. We offer the High Pressure Tank as an optional kit component because many people have local access to one. We recommend that you confirm with a local gas supplier the required tank for a mixed gas fill. These tanks are produced from high strength aluminum alloy, rated at 2216 PSI/153 BAR, and comes with a female threaded 580 Valve is CGA approved that is compatible with Nitrogen Regulators.
  • Includes Premium Double Gauge Nitrogen Keg Beer Regulator
    This is the highest quality Nitrogen regulator on the Market today. You can use this regulator on any High Pressure Tank with a CGA-580 valve. Nitrogen tanks have a female thread (CGA-580), these regulators have a male thread. Double Gauge Regulators Measure PSI, as well as the Volume of Nitrogen in the Cylinder. They are good for indicating how much Nitrogen is left in the cylinder and when you should have it refilled. The hand control in the center is used to adjust the output pressure.
  • Includes 5 feet of 5/16 Inch I.D. Draft Beer Line Assembly with 2 Snap Clamps
    The standard length is 5 feet of 5/16" I.D. Blue Air/Co2 Tubing made of Themoplastic Vinyl Hose (Super Vinyl). This tubing will not rot, swell or dry out and is unaffected by normal cleaning compounds. This air line assembly comes with two Plastic Snap Clamps with a reusable clamp design.
  • Includes Premium "U" System Squeeze Handle Coupler which can Tap Guinness® Kegs
    Guinness® and Harp Lager use a coupler that is very specific to their brand. The coupler features a heavy duty ergonomic squeeze lever handle. This keg tap also features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg all you have to do is squeeze the handles together and then push down on the lever handle to properly couple the keg.
  • Includes 5 Feet of Beer Line Assembly
    This beer line assembly comes standard with 5' of 3/16" Clear Beer Tubing made of Themoplastic Vinyl Hose (Super Vinyl). This tubing meets and exceeds all rigid demands for beer dispensing. This beer line remains flexible and durable at recommended temperatures and pressures and will not rot, swell or dry out and is unaffected by normal cleaning compounds. This assembly comes with one Plastic Snap Clamp (reusable clamp design) and a Coupling Assembly of 1 Stepless Clamp, 1 3/16" Hose Nipple/Tail Piece and Hex Coupling Nut (connects to keg coupler).
  • Includes 4-1/8" Long Shank with Nipple Assembly
    This shank is 4-1/8" long measured from the end of the threading to the end where the faucet attaches. The shank comes with a black plastic flange on the front and a compression ring on the back. Forged brass lock nut. 3/16" ID beer line connection.
  • Includes Premium Stainless Steel Guinness® Dispensing Stout Beer Faucet
    This premium stainless steel stout faucet provides the best in purity having an all stainless steel & plastic contact with the beer. To properly pour Guinness® and achieve the famous and unique head on the beer requires a specialty European Stout Beer Faucet. The faucet operates by pulling forward and down on the tap handle. In addition, this premium stout faucet features a restricted spout that contains a tiny disc. The restrictor disc helps slow down the pour and allows the beer to pour properly. If you need to pour regular beer with this faucet, just remove the restrictor disc.
  • Comes with black ABS plastic Faucet Knob.
  • 1 Fiber Washer that is placed between regulator and Co2 Tank. This washer is optional. You can pick up additional washers when you get you tank filled.
  • 1 Neoprene Washer that is placed between keg coupler and beer line assembly. The purpose of this washer is stop any beer from leaking out the top of the keg coupler.
  • Standard Specialty Faucet Wrench
    This specialty faucet is used to connect the shank to the faucet. To properly tighten the faucet to the shank without leakage, requires this wrench that hooks into the holes on tightening colar. This faucet wrench is needed to remove faucet for cleaning or if you are switching to a stout faucet.
  • Detailed Instruction/Installation Manual.
  • All additional technical questions can be handled by one of our friendly technical support staff by calling toll free 1-800-710-9939.

  • UPC: 608938679314

    Kegco Standard Guinness® Dispensing Kegerator Keg Tap Conversion Kit Reviews

    Average Customer Rating:
    (based on 0 reviews) 
    No customer reviews available. Be the first to write a review!
    Shipping Calculator
    Enter Your Shipping Zip Code:
    Shipping Options
    Please enter a zip code.
    All charges are based on a quantity of 1.
    Click "Add to Cart" above to change quantities
    and make actual ship method selection.