Kegco Standard Door Mount Kegerator Keg Tap Conversion Kit

The Kegco Standard Kegerator Conversion Kit comes with the beer parts you will need to successfully convert your refrigerator into a draft beer dispenser (The Co2 Tank is Extra and not included in the kit). Compared to the Economy kegerator kit, the standard kit upgrades the single gauge regulator to a double gauge (second gauge lets you know how much Co2 is left in the tank) and also upgrades the keg coupler from the wing handle design to the more durable lever handle. All the draft beer parts are of the highest commercial grade quality which are designed and built to last.

Our kegerator conversion kits come complete with detailed instructions and are supported by our friendly and experienced product specialsts. You can count on them for personalized attention both before and after your purchase.

KEGCO STANDARD KEGERATOR CONVERSION KIT COMPONENTS

• (Optional) Co2 Tank. We offer the Co2 Tank as an optional kit component because many people already have one or would like a large tank size. All of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank and will not rust. If you do not already have a tank, we highly recommend you take advantage of our incredible low price on brand new Co2 tanks.
• Includes Kegco Premium Pro Series Double Gauge Co2 Regulator
  This Kegco premium pro series double gauge regulator is built with high end features! The premium pro series regulator works with any Co2 Tank with a CGA-320 valve and measures PSI, as well as the volume of the Co2 gas in the Cylinder. The second gauge indicates how much Co2 is left in the cylinder and when it should be refilled. The large turn knob in the center is used to easily adjust the output pressure. The premium pro series double gauge Co2 regulator has a chrome plated brass body. This regulator also features a manual pressure release valve.
• Includes 5 feet of 5/16 Inch I.D. Draft Beer Line Assembly with 2 Snap Clamps
  The standard length is 5 feet of 5/16" I.D. Blue Air/Co2 Tubing made of Themoplastic Vinyl Hose (Super Vinyl). This tubing will not rot, swell or dry out and is unaffected by normal cleaning compounds. This air line assembly comes with two Plastic Snap Clamps with a reusable clamp design.
• Includes D system Lever Handle Keg Coupler which can Tap all Domestic Kegs
  This is a commercial grade lever Handle keg coupler. The KT85D-L is compatible with all domestic brand kegs. This keg tap works with all American "D" system sankey kegs. This coupler features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg all you have to do is pull out and then down on the lever handle to properly couple the keg. This Keg Coupler can be swapped out to a Home Brew Coupler for no additional cost.
• Includes 5 Feet of Beer Line Assembly.
  This beer line assembly comes standard with 5' of 3/16" Clear Beer Tubing made of Themoplastic Vinyl Hose (Super Vinyl). This tubing meets and exceeds all rigid demands for beer dispensing. This beer line remains flexible and durable at recommended temperatures and pressures and will not rot, swell or dry out and is unaffected by normal cleaning compounds. This assembly comes with one Plastic Snap Clamp (reusable clamp design) and a Coupling Assembly of 1 Stepless Clamp, 1 3/16" Hose Nipple/Tail Piece and Hex Coupling Nut (connects to keg coupler).
• Includes 4-1/8" Long Shank with Nipple Assembly.
  This shank is 4-1/8" long measured from the end of the threading to the end where the faucet attaches. The shank comes with a black plastic flange on the front and a compression ring on the back. Forged brass lock nut. 3/16" ID beer line connection.
• Includes Chrome Beer Faucet with Brass Lever
  This premium quality faucet features a forged brass body with a highly polished chrome finish. This faucet has a brass shaft assembly and lever with a Teflon ball washer that ensures smooth operation. The brass lever has standard threading that is compatible with most branded tap handles.
• Comes with black ABS plastic Faucet Knob.
• 1 Neoprene Washer that is placed between keg coupler and beer line assembly. The purpose of this washer is stop any beer from leaking out the top of the keg coupler.
• Standard Specialty Faucet Wrench
  This specialty faucet is used to connect the shank to the faucet. To properly tighten the faucet to the shank without leakage, requires this wrench that hooks into the holes on tightening collar. This faucet wrench is needed to remove faucet for cleaning or if you are switching to a stout faucet.
• Detailed Instruction/Installation Manual.
• All additional technical questions can be handled by one of our friendly technical support staff by calling toll free 1-800-710-9939.

UPC: 608938443175