Kegco Standard Two Keg Door Mount Kegerator Beer Tap Conversion Kit

Regular Price: $206.24
You Save $41.25 (20%)

The Kegco Standard Dual Keg Kegerator Conversion Kit comes with everything you will need to successfully convert your refrigerator or chest freezer into a two product draft beer cooler. This keg tap kit is designed to run two completely separate kegs. Depending upon your refrigerator capacity, you can run 2 full size kegs, 2 pony kegs, 2 five gallon kegs or any combination you choose. All the draft beer parts are of the highest commercial grade quality which are designed and built to last.

Our keg tap conversion kits come complete with detailed instructions and are supported by our friendly and experienced product specialsts. You can count on them for personalized attention both before and after your purchase.

  • (Optional) Co2 Tank. We offer the Co2 Tank as an optional kit component because many people already have one or would like a large tank size. All of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank and will not rust. If you do not already have a tank, we highly recommend you take advantage of our incredible low price on brand new Co2 tanks.
  • Includes Kegco Premium Pro Series Two Product Double Gauge Co2 Regulator
    This Kegco premium pro series double gauge regulator is built with high end features! The premium pro series regulator works with any Co2 Tank with a CGA-320 valve and measures PSI, as well as the volume of the Co2 gas in the Cylinder. The second gauge indicates how much Co2 is left in the cylinder and when it should be refilled. The large turn knob in the center is used to easily adjust the output pressure. The premium pro series double gauge Co2 regulator has a chrome plated brass body. This regulator also features a manual pressure release valve. It has a built-on Co2 splitter and two shut-off valves, allowing you to run your air lines directly to each keg coupler.
  • Includes Two Seperate Assemblies of 5/16 Inch I.D. Draft Beer Line Assembly with 2 Snap Clamps
    The standard length is 5 feet of 5/16" I.D. Blue Air/Co2 Tubing made of Themoplastic Vinyl Hose (Super Vinyl). These tubing assemblies will not rot, swell or dry out and is unaffected by normal cleaning compounds. This air line assembly comes with two Plastic Snap Clamps with a reusable clamp design.
  • Includes Two D system Lever Handle Keg Couplers which can Tap all Domestic Kegs
    These are commercial grade lever Handle keg couplers. The KT85D-L is compatible with all domestic brand kegs. These keg taps work with all American "D" system sankey kegs. These couplers feature a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg all you have to do is pull out and then down on the lever handle to properly couple the keg. These Keg Couplers can be swapped out to a Home Brew Coupler for no additional cost.
  • Includes 2 Seperate 5 Foot Long Beer Line Assemblies
    These beer line assemblies come standard with 5' of 3/16" Clear Beer Tubing made of Themoplastic Vinyl Hose (Super Vinyl), one Plastic Snap Clamp (reusable clamp design) and a Coupling Assembly of 1 Stepless Clamp, 1 3/16" Hose Nipple/Tail Piece and Hex Coupling Nut (connects to keg coupler).
  • Includes 2 Seperate 4-1/8" Long Shanks with Nipple Assembly.
    These shanks are 4-1/8" long measured from the end of the threading to the end where the faucet attaches. These shanks come with a black plastic flange on the front and a compression ring on the back. Forged brass lock nut. 3/16" ID beer line connection.
  • Includes 2 Chrome Beer Faucets with Brass Lever
    These premium quality faucets feature a forged brass body with a highly polished chrome finish. These faucets have a brass shaft assembly and lever with a nylon ball washer that ensures smooth operation. The brass lever has standard threading that is compatible with most branded tap handles.
  • Two Comes with black ABS plastic Faucet Knobs.
  • 1 Fiber Washer that is placed between regulator and Co2 Tank. This washer is optional. You can pick up additional washers when you get you tank filled.
  • Two Neoprene Washers that are placed between the keg couplers and the beer line assemblies. The purpose of these washers are to stop any beer from leaking out the top of the keg couplers.
  • Standard Specialty Faucet Wrench
    This specialty faucet is used to connect the shank to the faucet. To properly tighten the faucet to the shank without leakage, requires this wrench that hooks into the holes on tightening colar. This faucet wrench is needed to remove faucet for cleaning or if you are switching to a stout faucet.
  • Detailed Instruction/Installation Manual.
  • All additional technical questions can be handled by one of our friendly technical support staff by calling toll free 1-800-710-9939.

UPC: 608938443229

Kegco Standard Two Keg Door Mount Kegerator Beer Tap Conversion Kit Reviews

Average Customer Rating:
(based on 9 reviews) 
Great product Great service
by:RZ (05-01-2015)
Comments:The wonderful folks at TBF did it again.
The 2 door system was easy to install and worked perfectly the minute we used it. We have not had any issues with the system since installation.
I am always impressed with the ordering process and shipping department at TBF. Ordered it on a Monday and here on Thursday. This is my 4th order and I have always been a happy customer!!!
Bottom Line:I would recommend this product.
what a great christmas gift
by:Bobby (12-26-2014)
florence, ky
Comments:Received this in only a few days. I was very pleased with the quality of the kit. Was very easy to install. Instructions were easy to understand. Was drinking my favorite suds in no time. Nothing like draft beer and even better when you can enjoy it at home. For anyone looking to start out I recommend doing your research on what beer you like to know what couplers to get. Also search around for co2 tanks at your local welding supply and beer distributor. They may be able to save you some money and time. I love my new bar!!!!!
Bottom Line:I would recommend this product.
Quality Parts
by:Swimspud (10-21-2014)
Newhall, Ca
Comments:I just got the equipment in the mail, arrived in less then a week! Ordering online always makes me a bit nervous because you cannot feel the parts, but let me tell you that these are all high quality solid steel parts! Cant wait to try it out
Bottom Line:I would recommend this product.
So far so good
by:Ames (10-01-2014)
Seattle, Wa
Comments:I plan on building my husband a double tap kegerator for his birthday. Although I haven't assemble it yet, I am very satisfied with the Beverage Factory thus far. *Ordering the kit was easy.
*The shipping was reasonable
*It arrived on time
*Everything was in the box and perfectly packaged
I felt like a kid on Christmas when I opened the box and unwrapped all the shiny pieces. I look forward to completing my project and I'm certain the kit will meet my expectations.
Bottom Line:I would recommend this product.
Great deal
by:Ron (09-23-2014)
Comments:I Converted my freezer to a keezer and found this to be the best value for the parts needed. I only wish the beer line came with 6' instead of the 5' it came with, but that's minor since I plan on changing my line regularly. Overall I'm very happy with this setup
Bottom Line:I would recommend this product.
Shipping Calculator
Enter Your Shipping Zip Code:
Shipping Options
Please enter a zip code.
All charges are based on a quantity of 1.
Click "Add to Cart" above to change quantities
and make actual ship method selection.