Commercial Grade Double Gauge Co2 Kegerator Regulator

Regular Price: $69.94
You Save 20%

This Taprite 742BF Commercial Grade Double Gauge Co2 Kegerator Regulator is built to last and loaded with commercial grade features! The commercial regulator works with any Co2 Tank with a CGA-320 valve and measures PSI, as well as the volume of the Co2 gas in the Cylinder. The second gauge indicates how much Co2 is left in the cylinder and when it should be refilled. The large turn handle in the center is used to easily adjust the output pressure.

The commercial double gauge Co2 regulator has a forged brass body. This regulator also features a non-adjustable safety blow off at 55-65 PSI, a flow control inlet nipple filter and a permanent Quad-Ring inlet seal on the primary gauge.

This regulator features a larger valve body for higher flow. What makes this regulator special is its check valve that prevents backflow of liquids into the regulator. In addition, the flow control on this regulator is automatic, which means that it automatically adjusts the pressure. This is the industry standard found in most commercial environments.

  • Primary Double Gauge
  • Pressure Adjustment Handle
  • Forged Brass Body
  • Non-adjustable safety blow off at 55-65 PSI
  • Flow control inlet nipple filter
  • Large Valve Body
  • Permanent Quad-Ring inlet seal on the primary gauge
  • 3/8" O.D. Outlet Barb with Shut-Off
  • Pressure Relief Valve releases at 51-53 PSI

Commercial Grade Double Gauge Co2 Kegerator Regulator Reviews

Average Customer Rating:
(based on 15 reviews) 
Great Co2 Regulator
by:Don (11-03-2015)
Fruitland Park, FL
Comments:Needed a new regulator for my kegerator. This one worked great out of the box. Quick delivery too.
Bottom Line:I would recommend this product.
by:Gabe (09-12-2015)
Winnsboro, tx
Comments:Great regulator great price now I know how much co2 is left and I can easily regulate the output must have for any kegerator owner
Bottom Line:I would recommend this product.
Good quality double gauge regulator
by:Casa Fuego (07-02-2015)
Ashburn, VA
Comments:I bought this regulator to replace the stock one that came with my kegerator. It is a much better quality regulator than the Chinese-made one I replaced. It made a huge difference in the beer dispensing speed and quality (i.e. Much less foam).

The only problem I had was that I did not order a new air line or fittings. The new regulator had a different size fitting so I could not re-use the old line and tailpiece.

I definitely recommend this product to anyone looking for a replacement regulator.
Bottom Line:I would recommend this product.
great regulator
by:brian (02-24-2015)
Comments:love this regulator. huge upgrade over the previous one I had. wish the guage guard were built in or less expensive - it seemed overpriced to me so only 4 stars. regulator itself is excellent.
Bottom Line:I would recommend this product.
Good Well Made Regulator
by:Richard (02-11-2014)
Bryn Mawr, Pennsylvania
Comments:I use this in my beer kegging. Work as well as can be expected. The handle on the adjusting screw makes it very easy to get the correct pressure - No screw drivers needed to keep near the regulator to adjust pressure. I did have a leak where the barbed connector screws into the shut off valve. The barbed connector has a straight thread without an O-ring or gasket. Thread sealant does not work well with straight threads, so I installed a thin O-ring lubricated with a drop of silicone oil to prevent the O-ring from pinching during the tighting of the barbed connector. Simple fix to the problem. Don't know what the designers planned to prevent leaks, but that was my answer.
Bottom Line:I would recommend this product.
Shipping Calculator
Enter Your Shipping Zip Code:
Shipping Options
Please enter a zip code.
All charges are based on a quantity of 1.
Click "Add to Cart" above to change quantities
and make actual ship method selection.