T752HP - 2-Product Dual Pressure Kegerator Co2 Regulator

Enlarge T752HP - 2-Product Dual Pressure Kegerator Co2 Regulator
Enlarge Image

This regulator allows you to tap two kegs at the same time and individually control the pressure to each keg! / 0-60 gauges measure pressure to each keg / 0-2000 gauge measures CO2 in tank/ Large Knobs allow easy pressure adjustment with no additional tools / Individual shut off valves allow you to switch on/off each CO2 line / Great for homebrewers

List Price: $156.23
Regular Price: $124.99
Sale Price: $99.99 You Save 20%
Availability: IN STOCK (usually ships within 24 hours)
Quantity:  
based on 4 Reviews
4.5
This regulator allows you to tap two kegs at the same time and individually control the pressure to each keg!

The Two Product Two Pressure CO2 Regulator has two separate gauges to individually measure the pressure to each keg and allow you to adjust it particularly for the type of beer or beverage you are drinking. A third gauge (left gauge) shows you how much CO2 is left in the tank, so you don't run out. Individual air shut off valves allow for each CO2 line to be turned on/off independently. Preset safety pressure relief valve automatically releases at 55-65 PSI.

The lightweight polycarbonate bonnet is durable and will not corrode in wet environments. No special tools are required to raise or lower the CO2 pressure. The easy to use cap knob simply pulls out to adjust pressure up or down then pushes back in to lock in pressure.

Dimensions: 9"W x 7 1/2"H x 5 1/2"D

  • Dual Primary Regulators allow you to tap two kegs at the same time and control the pressure to each
  • 0-60 gauges measure pressure to each keg
  • 0-2000 gauge measures CO2 in tank
  • Individual shut off valves allow you to switch on/off each CO2 line
  • High CO2 volumetric flow to insure continuity in product dispensing
  • Polycarbonate Bonnet will not chip, break or fade
  • 10 Micron filter built in to keep contaminants out of regulator

UPC: 608938598721

T752HP - 2-Product Dual Pressure Kegerator Co2 Regulator Reviews

Average Customer Rating:
(4.5)
(based on 4 reviews) 
Easy operation and set-up
by:Seymour Brewski (05-12-2014)
Phoenix, AZ
Comments:I bought this to split one C02 tank between two taps. Easy setup and install and works great!
Bottom Line:I would recommend this product.
 
Great system for your two brews.
by:Akstyler (11-04-2013)
Florence Az
Comments:The big knobs are so easy to use. Gauges easy to read.
Bottom Line:I would recommend this product.
 
Must have for double tap
by:Seth (10-02-2013)
Tennessee
Comments:Purchased this to upgrade the original equipment that came with it. Completely impressed with the purchase. Wish we had bought this originally. A must have if you are running two beers in order to get the correct pressure for each. Don't settle; spend the extra cash.
Bottom Line:I would recommend this product.
 
Best regulator
by:SM (07-26-2012)
Midwest USA
Comments:This is my 3rd regulator set. I have only had these for a very short time and so far they are a vast improvement over my previous regulators.

lessons learned don't cheap out and if you have more than 1 keg you really need more than 1 pressure setting to get a good draw form different beers and it makes force carbonating easier.

I purchased 2 of these and split one unit to make a single regulator for my spare tank and add 1 to the other set to make triple set to put in my Kegerator no more need for a manifold. I did have a little leak at first. I took it back apart and re-wrapped the threads with more Teflon tape and no more leak.

The stem has a permanent "O" ring so no need for fiber or nylon washers. Just give the "O" ring a light coating of keg lube to prevent it from binding when tightening it to the tank valve.

IMPORTANT! take care not to get any keg lube anywhere ware else only a light sheen on the "O" ring is all that is needed! Getting keg lube anywhere else could spell disaster!

I upgraded my Kegerator to a triple draft tower with 3 Perlic faucets. Currently I have 2 different 1/6th BBLs of craft brew and a corny keg going.

These units are more responsive to fine adjustment and demand while keeping a more stable pressure. The large knob makes tool-less adjustment a breeze. Just reach in the back of the cabinet pull to unlock, twist to adjust then push to lock. The only draw back is the triple set makes the tank side heavy so you must secure it in place.
Bottom Line:I would recommend this product.
Shipping Calculator
Enter Your Shipping Zip Code:
Shipping Options
Please enter a zip code.
All charges are based on a quantity of 1.
Click "Add to Cart" above to change quantities
and make actual ship method selection.




Top Sellers

Kegco 542-2 - Premium Pro Series Double Gauge Kegerator Regulator w/ Two Product Out

Taprite T742-2 - Commercial 2-Product Dual Gauge Primary Kegerator Regulator

742-2 Commercial Grade Dual Gauge Keg Beer Regulator with Air Splitter

642-2 Premium Dual Gauge Co2 Keg Beer Regulator with Air Splitter