Triple Faucet Stainless Steel Draft BeerTower with Perlick 630SS Faucets

Regular Price: $299.99
You Save $60.00 (20%)

This is a Polished Stainless Steel Single Column, Triple Faucet, 3" Diameter Draft Tower. This tower comes complete with three Perlick 630SS stainless faucets and three separate 5' lengths of 3/16" clear beer tubing with nozzle and hex nut assemblies. It will connect to all standard keg couplers.

This tower is mounted using the gasket and four screws that are included. Faucet knobs are included.

The Perlick stainless steel beer faucet is the most sanitary faucet available anywhere. Its innovative seat-forward design keeps internal parts from being exposed to air, preventing the handle lever from sticking and minimizing bacterial build-up.This revolutionary design and stainless steel body ensures a brewery fresh taste. In combination with the stainless steel tower shanks, your beer will only touch stainless steel metal components with this tower.

  • 3" Diameter Polished Stainless Steel Column
  • 100% Stainless Steel Contact
  • Height to top of column: 14.5"
  • Height to top of standard faucet knob: 17.5"
  • Height to bottom of lowest faucet: 9.75"
  • Height to top shank hole center: 13"
  • Height to bottom shank hole center: 11.5"
  • 3 Perlick 630SS Stainless Steel Faucets
  • Three 5' Lengths of 3/16" I.D. Clear Beer Tubing with Nozzle and Hex Nut Assemblies
  • Connects to All Standard Keg Couplers
  • Mounting Gasket and Screws Included
  • Faucet Knobs Included
  • NSF Approved

UPC: 608729694526
Key Features
Dispense SystemAir Cooled
Number of Faucets3
FinishStainless Steel
Column Diameter3"

Triple Faucet Stainless Steel Draft BeerTower with Perlick 630SS Faucets Reviews

Average Customer Rating:
(based on 7 reviews) 
Three tap faucet
by:Bo (03-02-2015)
Lidgerwood, ND
Comments:The Perlick faucets on this tower work well. We use this faucet on our specialty beers and haven't had any sticking issues which has been a problem with previous towers.
Bottom Line:I would recommend this product.
Shinyand beautiful
by:Platano (11-19-2014)
Miami, FL
Comments:Came with screws that fit for fridge and counter. Looks amazing and faucets move smoothly. Really easy to install for fridge with pre-cut holes.
Bottom Line:I would recommend this product.
Beautiful product!
by:Brew Dog (12-13-2013)
Bakersfield CA
Comments:Advantage: already with tubing attached to connect direct to the keg

Disadvantage: will be difficult to fully disassemble for thorough cleaning
Bottom Line:I would recommend this product.
Great product
by:white Towers Brewing (09-29-2013)
Menifee , Ca
Comments:Used it on my keezer, works great, looks great, top notch quality
Bottom Line:I would recommend this product.
Just upgraded a Danby Kegerator!
by:Roy - CQ Homebrew (03-08-2013)
Littleton, CO
Comments:I just upgraded my single faucet Kegerator, a Danby purchased early this year (2013) , to a triple faucet using this stainless steel tower with stainless steel Perlick faucets. Bottom line: This tower/faucet combo is outstanding! The black dive-suit like insulation sleeve is 3 or 4 times thicker than the sleeve that came with the stock Danby tower, plus this has a much thicker styrofoam insulator (about 6x) at the cap. (Note, I slightly enlarged the interior width of the Danby kegerator, by about 3/8" on left front side, to make it fit three corny kegs inside ... one in back, 2 up front ... stock, only 2 fit ... but that mod was easily done with an oscillating tool with knife blade attachment & sticky-back roof flashing metallic tape to re-cover the 4" wide stripe of insulation exposed in the fridge from the cut). I also added a forced air towercooler, and while the cooling hose was a slightly tight fit in this tower, I was able to run the big air hose down the tower into the fridge below alongside the 3 preinstalled serving lines (I found it easier to run the cooling hose down from the top, rather than trying to get it up into the tower from below). The install was easy! This tower just bolted right on to the existing threaded slots on the Danby's top surface perfectly. The Perlick faucets look awesome and work quite well. This is a super upgrade to this kegerator for the home brewer ... and sure beats having to open the door to pour from party faucets (that often leaked) to get to the 2nd and 3rd beverage inside! I'm very very happy with this upgrade ... it is a great choice. I also feel good knowing my beer (and soda for the kids) is running through stainless steel faucets. I could have purchased a triple faucet tower locally, but what was available was only chrome plated towers with inferior faucets. The Beverage Factory price for this stainless steel tower is a great deal ... less than the local chrome version available. And standard shipping was fast! (Can you tell that I'm happy with this purchase?)

Bottom Line:I would recommend this product.
Shipping Calculator
Enter Your Shipping Zip Code:
Shipping Options
Please enter a zip code.
All charges are based on a quantity of 1.
Click "Add to Cart" above to change quantities
and make actual ship method selection.