Triple Faucet Stainless Steel Draft BeerTower with Perlick 525SS Faucets

Stainless Triple Tap Draft Tower with three Perlick 525SS stainless faucets.

This is a Polished Stainless Steel Single Column, Triple Faucet, 3" Diameter Draft Tower. This tower comes complete with three Perlick 525SS stainless faucets and three separate 5" lengths of 3/16" clear beer tubing with nozzle and hex nut assemblies. It will connect to all standard keg couplers.

This tower is mounted using the gasket and four screws that are included. Faucet knobs are included.

The Perlick stainless steel beer faucet is the most sanitary faucet available anywhere. Its innovative seat-forward design keeps internal parts from being exposed to air, preventing the handle lever from sticking and minimizing bacterial build-up. In addition, the removable spout makes cleaning much easier. This revolutionary design and stainless steel body ensures a brewery fresh taste.

3" Diameter Polished Stainless Steel Column
3 Perlick 525SS Stainless Steel Faucets
Three 5' Lengths of 3/16" I.D. Clear Beer Tubing with Nozzle and Hex Nut Assemblies
Connects to All Standard Keg Couplers
Mounting Gasket and Screws Included
Faucet Knobs Included
NSF Approved

UPC: 608866316800

Triple Faucet Stainless Steel Draft BeerTower with Perlick 525SS Faucets Reviews

Average Customer Rating:	(4.5)
(based on 2 reviews)

	Just upgraded a Danby Kegerator!
by:	Roy - CQ Homebrew (03-08-2013) Littleton, CO
Comments:	I just upgraded my single faucet Kegerator, a Danby purchased early this year (2013) , to a triple faucet using this stainless steel tower with stainless steel Perlick faucets. Bottom line: This tower/faucet combo is outstanding! The black dive-suit like insulation sleeve is 3 or 4 times thicker than the sleeve that came with the stock Danby tower, plus this has a much thicker styrofoam insulator (about 6x) at the cap. (Note, I slightly enlarged the interior width of the Danby kegerator, by about 3/8" on left front side, to make it fit three corny kegs inside ... one in back, 2 up front ... stock, only 2 fit ... but that mod was easily done with an oscillating tool with knife blade attachment & sticky-back roof flashing metallic tape to re-cover the 4" wide stripe of insulation exposed in the fridge from the cut). I also added a forced air towercooler, and while the cooling hose was a slightly tight fit in this tower, I was able to run the big air hose down the tower into the fridge below alongside the 3 preinstalled serving lines (I found it easier to run the cooling hose down from the top, rather than trying to get it up into the tower from below). The install was easy! This tower just bolted right on to the existing threaded slots on the Danby's top surface perfectly. The Perlick faucets look awesome and work quite well. This is a super upgrade to this kegerator for the home brewer ... and sure beats having to open the door to pour from party faucets (that often leaked) to get to the 2nd and 3rd beverage inside! I'm very very happy with this upgrade ... it is a great choice. I also feel good knowing my beer (and soda for the kids) is running through stainless steel faucets. I could have purchased a triple faucet tower locally, but what was available was only chrome plated towers with inferior faucets. The Beverage Factory price for this stainless steel tower is a great deal ... less than the local chrome version available. And standard shipping was fast! (Can you tell that I'm happy with this purchase?) Roy
Bottom Line:	I would recommend this product.

	Kegerator upgrade
by:	sm (07-26-2012) Midwest USA
Comments:	Excellent Kegerator upgrade. Perlic faucets are the best. Every thing needed was in the box. The only short cumming is the condensation on the tower. The foam rubber sheet rolled up for insulation is some what inadequate. My Kegerator has forced air cooling with a tower hose. Cold air is able to pass between the form and the tower shell. I am considering my options to better insulate the tower.
Bottom Line:	I would recommend this product.