Strongly recommended for wine cellar installations of 1800 Series Wine Cooling Units.
Recommended when the Wine Cooling Unit will be installed in a wine cellar, 1/2-inch ID condensate fitting and 8-foot clear vinyl tube allows overflow condensation to exit from the bottom of the Cooling Unit.
Please note: This configuration will allow the drain line to exit inside the wine cellar. The bottom drain line is located 7 inches from the rear of the cooling unit (approximately 1 inch from the right edge of the cooling unit). Therefore, when configured with the bottom drain line, the front of the cooling unit must extrude 10 inches inside the cellar.