Strongly recommended for wine cellar installations of 1800 Series Wine Cooling Units in humid environments with 110V power and/or when the drain line cannot be used.
When the Wine Cooling Unit will be installed in a Wine Cellar with hot, humid conditions, our 100W Heating Element is designed to burn off excess moisture. In addition, the 1/2-inch ID Condensate Fitting and 8-foot Clear Vinyl Tube allows overflow condensation to exit from the bottom of the cooling unit.
Please note: This configuration will allow the drain line to exit inside the wine cellar. The bottom drain line is located 7 inches from the rear of the cooling unit (approximately 1 inch from the right edge of the cooling unit). Therefore, when configured with the bottom drain line, the front of the cooling unit must extrude 10 inches inside the cellar. This item will work only in 110V environments. A 200W heating element and condensate drain line are offered as standard items with CellarPro 3200VS and 4200VS cooling units.