Kegco Add A Tap Conversion Kit
Our kegerator conversion kits come complete with detailed instructions and are supported by our friendly and experienced product specialists. You can count on them for personalized attention both before and after your purchase.
- Includes Chrome Beer Faucet with Brass Lever
This premium quality faucet features a forged brass body with a highly polished chrome finish. This faucet has a brass shaft assembly and lever with a nylon ball washer that ensures smooth operation. The brass lever has standard threading that is compatible with most branded tap handles.
- Includes 4-1/8" Long Shank with Nipple Assembly.
This shank is 4-1/8" long measured from the end of the threading to the end where the faucet attaches. The shank comes with a black plastic flange on the front and a compression ring on the back. Forged brass lock nut. 3/16" ID beer line connection.
- Includes 5 feet of 5/16 Inch I.D. Draft Beer Line Assembly with 2 Snap Clamps
The standard length is 5 feet of 5/16" I.D. Blue Air/Co2 Tubing made of Themoplastic Vinyl Hose (Super Vinyl). This tubing will not rot, swell or dry out and is unaffected by normal cleaning compounds. This air line assembly comes with two Plastic Snap Clamps with a reusable clamp design.
- Includes D system Lever Handle Keg Coupler which can Tap all Domestic Kegs
This is a commercial grade lever Handle keg coupler. The KT85D-L is compatible with all domestic brand kegs. This keg tap works with all American "D" system sankey kegs. This coupler features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg all you have to do is pull out and then down on the lever handle to properly couple the keg. This Keg Coupler can be swapped out to a Home Brew Coupler for no additional cost.
- Includes 5 Feet of Beer Line Assembly
This beer line assembly comes standard with 5' of 3/16" Clear Beer Tubing made of Themoplastic Vinyl Hose (Super Vinyl). This tubing meets and exceeds all rigid demands for beer dispensing. This beer line remains flexible and durable at recommended temperatures and pressures and will not rot, swell or dry out and is unaffected by normal cleaning compounds. This assembly comes with one Plastic Snap Clamp (reusable clamp design) and a Coupling Assembly of 1 Stepless Clamp, 1 3/16" Hose Nipple/Tail Piece and Hex Coupling Nut (connects to keg coupler).
- Comes with black ABS plastic Faucet Knob.
- 1 Neoprene Washer that is placed between keg coupler and beer line assembly. The purpose of this washer is stop any beer from leaking out the top of the keg coupler.
- All additional technical questions can be handled by one of our friendly technical support staff by calling toll free 1-800-710-9939.
Kegco Add A Tap Conversion Kit Reviews
|Average Customer Rating:|
|(based on 1 reviews)|
|not bad for the money|
|Comments:||Just installed it in my fridge and every one loved it plus 15.5 gallons of beer don't go that far.|
|Bottom Line:||I would recommend this product.|
All charges are based on a quantity of 1.
Click "Add to Cart" above to change quantities
and make actual ship method selection.
Sale Price: $124.99
Sale Price: $164.99
Sale Price: $95.99
Sale Price: $114.95