Oasis POUMR1HK 3 Gallon Self Install Filtration POU Hot, Cook 'N Cold Water Cooler

Oasis Self Install POU Hot, Cook N Cold Cooler The Oasis POUMR1HK Point-of-Use Hot, Cook 'N Cold Water Cooler is equipped with durable and easily accesible front cabinet which allows you to install your own water treatment system.

This point-of-use water cooler installs easily and directly into your cold water line for a continuous supply of hot water for beverage making, room temperature water for cooking, and cold water for drinking. The POUMR1HK holds 3 Gallons of water and if you choose to install a water filtration system, the water coolers front access cabinet is specifically designed to hold a water treatment system of your choice which will effectively remove impurities from your drinking water.

Oasis is the recognized worldwide leader in the design and manufacture of Point-of-Use Water Coolers. Like all Oasis water coolers, Point-of-Use coolers are specifically designed and manufactured to be durable, easy to service and clean for a pure drinking experience.

Point-of-Use Water Coolers eliminate such hassles of monthly water delivery bills, water storage problems, sore backs from lifting water bottles, spilled water from dumping water bottles, and the risk of running out of water just when you need it.

SPECIAL FEATURES

Dimensions & Specifications

Height:	41 3/8"
Width:	41 3/8"
Depth:	14 7/8"
Weight:	46 lbs.
Electrical:	110 V/60 Hz

POUMR1K does not include a water treatment system
Front access cabinet is designed to accomadate a water treatment system of your choice
Unit will work without a water treatment system
1 piece hot tank
Removable plastic reservoir that's easy to clean and dishwasher-safe.
Removable filter compartment cover gives easy front access to filtration space
Dual float system with built-in safety float to prevent overflowing
Contemporary styling and sleek one-piece square design
Blow molded bright white polyethylene cabinet hides scratches, fingerprints, & won't dent or rust
Drip Tray offers special large capacity with a modern design that is easy to clean and durable
Floor scratches and rust spots are non existent as unit's base is built into cabinet
3 year limited warranty
Specifically manufactured to exacting standards and meet FDA requirements

SPECIFICATIONS

Installation: Water Cooler installs directly into your plumbing system specifically a cold water line. Detail installation instructions included with purchase
Cabinet Shell & Frame: Modular polypropylene cabinet will resists cracking, fading, and yellowing. Color is molded into cabinet to hide scrapes caused by rough usage. Cabinet is easily removed for access to interior components. Frame is rigid, made of non-corroding plastic base and mid-pan attached by strong galvanized struts. The frame design allows for easy maintenance and refurbishment
Cold Water Refrigeration Unit: Convection-cooled condenser. Internally spring mounted, hermetically sealed compressor w/automatic overload protector. No lubrication needed. Refrigerant is controlled accurately by capillary tube.
Cold Water Thermostat: Temperature is controlled by adjustable thermostat w/"Off" position that is easily accessible on the rear of the cabinet
Cold Water Reservoir: Removable 3 gallon polyethylene reservoir. Reservoir insulation is a removable polysteren jacket
Hot Water Tank: This 500 watt heating element one piece hot tank is easy to replace or service without breaking soldered refrigeration connections. The hot tank is type 300 series stainless steel.
Hot Water Thermostat: Non-adjustable thermostat with safety limiter
Hot Water Safer Faucet: Self-closing faucet requires a two-step action that's easy for adults to use, but helps protect small children. All faucets are made of durable polypropylene.
Float System: Dual mechanical float system controls water level in reservoir. Secondary safety float/valve mechanism activates in case of primary valve failure. Safety system has a manual reset feature.
Capacity: 45 six-ounce cups of piping hot water per hour. 1 1/2 quart storage tank
Drip Receptor: The one-piece drip tray lifts out in seconds for easy removal. It's molded in polyethylene for durability. Easy clean in mild soap by hand.
Electrical: 110 Volts, 60 Hertz. Water Cooler compressor hp 1/20. 3-wire service cord and polarized plug furnished.

OPTIONS & ACCESSORIES

Filtration System Choose between 2 types of water filtrations systems, Carbon Filtration or Reverse Osmosis Filtration, both of which work to remove contanminets from your water supply, ensuring you have the freshest tasting and purest water for drinking and cooking.

Carbon Filtration in 3 Steps

STEP 1: Water flows from your water source directly into your units pre-installed Yellow Pre-Filter which removes most sediments insuring your PostCarbon filter works more effectively
STEP 2: Water runs from the Yellow Pre-Filter into the Blue Post Carbon Filter which absorbs all organic matter and chlorine as well as 99% of hazardous, industrial and argriculatural organic chemicals
STEP 3: Water passes through the Black carbon filter to reduce lead and cysts including Cryptosporidium and Giardia lamblia

Reverse Osmosis Filters Reverse Osmosis in 4 Steps

STEP 1: Water travels through the Oasis Yellow Pre-Filter removing all sediment
STEP 2: Water travels through Oasis Green Pre-Carbon Filter removing all chlorine before the Reverse Osmosis Process
STEP 3: Water travels through the Oasis Red 50 GPD Thin Film Membrane removing lead, sodium, cyanite, ammonium, mercury, bromide, cadmium, radium, magnesium, fluoride, nitrates, and more
STEP 4: Water travels through the Oasis Blue Post Carbon Filter removing all remaing contaminats