Beverage-Air

Commercial Beer Cooler - Black Vinyl

Model:BEVAIRBLACK-1
$1,650.00
Specify Model:
The Beverage-Air BM23 Kegerator provides mobility with utility for home, club, or hospitality. This draft beer refrigerator offers full beer keg capacity, is heavy-duty1/2and has forced air refrigeration -1/2draft beer is dispensed ice cold every time. The BM23 kegerator comes in 2 models, the Standard Model and the Club Top Model. Both models are available in 2 finishes: Black Vinyl and Stainless Steel.

Standard construction includes wear resistant vinyl on steel exteriors with black the most popular vinyl choice. Top is made from heavy-duty stainless steel including built-in drip tray for easy cleaning. Top rail is standard on all models.

Photo of Beverage Air BM23.

Inside construction utilizes galvanized steel for walls and ceiling. Reinforced floors and doorsills are made from heavy-duty stainless steel to provide lasting service. Door is self-closing with key lock. Magnetic gasket provides positive door sealing. Cabinet insulation is foamed-in-place moisture resistant polyurethane (CFC free) foam which binds the exterior walls with the interior walls to form solid construction and provide unsurpassed insulation.

Lift-out heavy duty forced-air refrigeration system creates a steady flow of cold air through the complete product load and provides fast uniform recovery and cooling. Refrigerant used is R134a, which is CFC-free for full compliance to all environmental concerns. A 6' cord and grounded plug are provided for electrical connection.

  • Keg Storage Capacities:
    • One (1) Full Size / 1/2-Barrel (15.5 Gal.)
    • One (1) Pony Size / 1/4-Barrel Short (7.75 Gal.)
    • Two (2) 1/4-Barrel Slim (7.75 Gal.) or
    • Three (3) 1/6-Barrel (5.23 Gal.)
    • Four (4) Home Brew (5.0 Gal.)
  • Single Door Design
  • 4" Heavy-Duty Swivel Casters for Easy Mobility
  • 3" Insulated Chrome Single Faucet Draft Beer Tower
  • Continuous Cold Air Channeled Through Tower to Ensure Cold Product
  • Wear-Resistant Vinyl on Steel Exterior
  • Heavy-Duty Stainless Steel Top with Drip Tray and Guard Rail
  • Capped Opening in Top for Water Station Line Penetration
  • Galvanized Steel Walls and Ceiling
  • Stainless Steel Floor and Reinforced Door Breakers
  • Magnetic Gasket Provide Positive Door Sealing
  • Self-Closing Door with Lock
  • Balanced Refrigeration System Designed to Operate 36°F-38°F
  • Refrigeration System Utilizes Ozone Friendly R134a Refrigerant
  • CFC-Free Foamed-in-Placed Polyurethane Insulation
  • Readily Adaptable for Installation of Wine Dispensers or Water Station
  • Available in Black Vinyl or Stainless Steel Finish
  • UL Listed and NSF Certified

WARRANTY INFORMATION

  • 1 Year Parts and Labor
  • Additional 4 Years (Parts Only) on the Compressor
Brand Full Size Pony Size Quarter slim 5 Gallon D System 5 Gallon Ball Lock 5 Gallon Pin Lock 5 Gallon Strap Handle
Kegco K199 1 1 1 2 2 2 2
Kegco K209 1 1 1 2 3 3 3
Kegco K309 1 1 1 2 3 3 3
Kegco XCK-1 1 1 2 4 4 4 4
Summit SBC677 1 1 1 2 3 2 3
Summit SBC635 1 1 1 2 3 3 3
Haier Kegerator 1 1 2* 2 3 3 3
Danby Kegerator 1 1 1 2 3 2 3
Marvel Kegerator 1 1 1 2 3 3 3
Perlick HP15T 0 0 0 1 1 1 1
Perlick HP24T 0 1 0 2 2 1 2
Perlick HC24T 0 1 0 2 2 1 2
UBC Kegerator 1 1 2 4** 3 4** 4**
Beverage Air BM23 1 1 2 3 4 4 4
Everest EBD1 1 1 1 2 3 3 3
Brand Full Size Pony Size Quarter slim
Kegco K199 1 1 1
Kegco K209 1 1 1
Kegco K309 1 1 1
Kegco XCK-1 1 1 2
Summit SBC677 1 1 1
Summit SBC635 1 1 1
Haier Kegerator 1 1 2*
Danby Kegerator 1 1 1
Marvel Kegerator 1 1 1
Perlick HP15T 0 0 0
Perlick HP24T 0 1 0
Perlick HC24T 0 1 0
UBC Kegerator 1 1 2
Beverage Air BM23 1 1 2
Everest EBD1 1 1 1
Brand 5 Gallon D System 5 Gallon Ball Lock 5 Gallon Pin Lock 5 Gallon Strap Handle
Kegco K199 2 2 2 2
Kegco K209 2 3 3 3
Kegco K309 2 3 3 3
Kegco XCK-1 4 4 4 4
Summit SBC677 2 3 2 3
Summit SBC635 2 3 3 3
Haier Kegerator 2 3 3 3
Danby Kegerator 2 3 2 3
Marvel Kegerator 2 3 3 3
Perlick HP15T 1 1 1 1
Perlick HP24T 2 2 1 2
Perlick HC24T 2 2 1 2
UBC Kegerator 4** 3 4** 4**
Beverage Air BM23 3 4 4 4
Everest EBD1 2 3 3 3

* - Using Wood riser for front keg

** - With external CO2 tank (3 with internal CO2 tank)


UPC: 608938442871
Dimensions
Height39"
Width24"
Depth29 1/2"
Weight
Unit Weight150 lbs.
Warranty
Labor1 Year
Parts1 Year
Compressor (Parts Only)5 Years
Key Features
Built-in CapableNo
Security LockYes
Keg CouplerNo
RegulatorNo
CO2 TankNo
Cleaning KitNo
Outdoor UseNo
Commercial UseYes
Keg Storage Capacities
Full Size / 1/2-Barrel1
Pony Size / 1/4-Barrel1
1/4-Barrel Slim2
1/6-Barrel3
5 gal. Ball/Pin Lock Keg4
Exterior
CabinetBlack Vinyl
Drip TrayYes
Guard RailYes
CastersYes
Draft Beer Tower
Number of Faucets1
MaterialChrome Plated Metal
Diameter3"
Door
Color / MaterialBlack
Number of Doors1
Door HandleYes
Field ReversibleNo
Accepts Custom Overlay PanelNo
Cooling System
TypeCompressor
Defrost SystemAutomatic
Front VentilationNo
Controls
Adjustable ThermostatYes
DigitalNo
Electrical
Electrical Requirements115 V / 60 Hz
PDFDispense Kit Assembly Manual

Commercial Beer Cooler - Black Vinyl Reviews

Average Customer Rating:
(5)
(based on 11 reviews) 
Great beer but too much noise
by:John (12-22-2015)
jd@jdfillers.com
Comments:I would rate this beer cooler 5 stars if it wasn’t for the fan noise. This beer cooler is much better than my previous cooler. It produces a great draft of beer. It keeps the beer really cold and produces a great head of foam (not too much or too little).

The fan noise, however, is preventing us from keeping the cooler in the house. It is now located in the garage. I wish there was a way to dampen the noise or a replacement fan that didn’t make so much noise. I told my wife that if we drink enough beer we won’t notice the noise at all :)
Bottom Line:I would recommend this product.
 
Quality Unit
by:Grandpa Ron (12-08-2015)
Boring, Or.
Comments:This unit works and looks like it did when I rolled it out of F.H. Steinbart Co. store in Portland, Oregon in 1977. I guess they don't make things like they used to, this unit has never had anything go wrong with it.
It's time for me to sell it, if interested you can contact me at rsrchl@yahoo.com.
Bottom Line:I would recommend this product.
 
Long Lasting
by:Bob (11-05-2015)
Santee, CA
Comments:My first Beverage-Air beer cooler lasted 29 1/2 years with very little maintenance or trouble. Hope this one is just as good. Definitely worth the money.
Bottom Line:I would recommend this product.
 
Great cooler but coils do not last
by:Ron (09-15-2015)
Carson City, Nevada
Comments:Great unit when it is working. Keeps kegs at a constant temp and great pours. The problem with mine was reliability. Bought it in 2007 and a little over 2 years the evaporator coil developed a leak. Had the coil replaced by a Bev-air service shop (I wish they had the 3 year warranty back in 2007). Now in 2015 the evaporator coil developed pinhole leaks again. This time it seems to have affected the compressor also. Repair will cost almost as much as a new one.
Bottom Line:I would recommend this product.
 
Nice unit
by:Uncle Gary (07-23-2014)
Seabrook, Tx
Comments:I bought this to replace my 30 yr old Rapids system(still running)at my wife's instistance. It is quieter. My old system had the CO2 tank and gauges on the outside, in back. This was easier to get to, to check the guages, turn on/off the tank. The old one had the compressor and electric on top. This saved its life during hurricane Ike. Hopefully this one will last half as long.
Bottom Line:I would recommend this product.
 
Shipping Calculator
Enter Your Shipping Zip Code:
Shipping Options
Please enter a zip code.
All charges are based on a quantity of 1.
Click "Add to Cart" above to change quantities
and make actual ship method selection.

 

Select Options

This product has multiple options. Please select options and then add to cart at the bottom of the page.

Item Qty Discount Price
Model: BF BEVAIRBLACK-1
Availability: In Stock
 $1650.00
Select Upgrade Options
SELECT TOWER
Chrome Plated Metal Tower (included) +$0.00
Polished Stainless Steel 12" Tower +$6.00
Brushed Stainless Steel 12” Tower +$11.00
Polished Stainless Steel 14.5" Extra Tall Tower +$11.50
Brushed Stainless Steel 14.5” Extra Tall Tower +$13.50
Remove Tower From Order (No Thanks, I Already Have One) -$15.00

SELECT FAUCET TYPE
Chrome Faucet / Brass Lever (included) +$0.00
Stainless Steel Faucet +$11.43
Perlick 630SS +$24.38
Perlick 650SS Flow Control +$36.88
Remove Faucets From Order (No Thanks, I Already Have One) -$5.00

Optional CO2 Tank
No Co2 Tank Selected +$0.00
Add 5 lb. Co2 Tank +$56.95
Add 5 lb. Co2 Tank with Electric Red Epoxy Finish +$61.99
Add 10 lb. Co2 Tank +$84.99
Add 15 lb. Co2 Tank +$94.99

OPTIONAL Co2 REGULATOR (Required if you don't already own one)
No Co2 Regulator Selected +$0.00
Select Pro Series Single Gauge Regulator +$34.95
Select Commercial Grade Single Gauge Regulator +$36.95
Select Pro Series Dual Gauge Co2 Regulator +$46.95
Select Commercial Grade Double Gauge Regulator +$54.95

OPTIONAL KEG COUPLER (Required if you don't already own one)
No Keg Coupler Selected +$0.00
KT85 - D System Keg Tap - Black Lever Handle +$25.95
KT86 - S System Keg Tap - Black Lever Handle +$31.99
Ball Lock Home Brew Keg Tap Complete Set +$14.99
Pin Lock Home Brew Keg Tap Complete Set +$14.99
KT1104W-A - A System Keg Coupler - Lever Handle +$49.95
KT3102W-G - G System Keg Coupler - Lever Handle +$49.95
KT2410W-M - M System Keg Coupler - Lever Handle +$49.95
Perlick Lo-Boy Low Profile D System Keg Tap Coupler w/ Pressure Relief +$55.95

Add Commercial Kegerator Cover
Kegco TX-3339 Commercial Kegerator Cover +$44.99

OPTIONAL TAP HANDLE UPGRADE (Standard Faucet Knob is Included)
Walnut Tap Handle with Black Chalkboard Surface +$38.95
Walnut Tap Handle with Green Chalkboard Surface +$38.95
Walnut Tap Handle with Dry Erase Surface +$39.95
Rustic Barnwood Tap Handle with Black Chalkboard Surface +$39.95

OPTIONAL FAUCET LOCKS
Add Optional FAUCET LOCK Add Slide-on Faucet Lock +$41.99
Add Wrap Around Lock for Standard Faucets +$53.99
Add Wrap Around Lock for Perlick 600 Series Faucets +$53.99

OPTIONAL CLEANING KIT (Important To Clean Lines after each Keg)
Optional CLEANING KIT! Add 1 Quart Hand Pump Cleaning Kit w/ 2 oz. Cleaner +$19.95
Add Deluxe Hand Pump Pressurized Cleaning Kit with 32 oz. Cleaner +$34.99
Add Complete D System Pressurized Cleaning Kit +$117.99