Danby DKC146SLDB Full Size Kegerator - Black Cabinet with Stainless Steel Door

Sit back and enjoy watching your next sporting event, and or entertaining guests with an ice cold beer served right from your new Kegerator! This DKC146SLDB Compact Kegerator by Danby will allow you to do just that. With its Stylish Black Cabinet and Stainless Steel Look Finished Door that is complimented by a Chrome Guard Rail and Pour Spout, this Kegerator is the perfect addition to any room in your home. With a Capacity of 5.2 Cu. Ft., this Keg Cooler can accomodate a half or full size keg. This Kegerator can convert to a Large Capacity All Refrigerator by inserting the two steel wire shelves that are included with the Kegerator.

This Keg Cooler features a Reversible Door Hinge, Automatic Defrost, Mechanical Temperature Control, a Scratch Resistant Worktop, 2 Steel Wire Shelves, as well as Heavy Duty Castors. This Keg Cooler measures at 33"H x 20-12/16"W x 23-14/16"D. A CO2 Tank is included with this Kegerator.

So sit back and enjoy watching your next sporting event, and or entertaining guests with an ice cold beer right from your new Kegerator!

Please Note: You will need to have the CO2 tank charged upon arrival for immediate use of your Kegerator. Also, this Kegerator is not intended to be built-in, nor is it intended for outdoor use.

This keg will hold one Full Size, Straight Pony or Quarter Slim Keg and up to two Sixth Slim, Strap Handle or Rubber Home Brew Kegs. Please Note: It will not fit Bevel or Rubber Kegs that are wider in the middle than at the top or bottom. These are commonly used by Coors and Miller Brewing Companies.

• The Danby DKC146SLDB Kegerator features a Black Cabinet with Decorative Stainless Steel Door
• This Keg dispenser comes with a complete Direct Draw Kit for D System Kegs. This Keg Tap system comes with all the commercial grade components needed to tap a domestic keg.
• Includes a brand new aluminum 5 lb. Aluminum Co2 Tank
  This Tank is produced from high strength aluminum alloy 6061-T6. This is superior to a steel tank because it will not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cyldiners are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators. Average fill good for 5-6 Kegs depending upon your fill. (5.5" diameter, 18.25" Height).
• Includes Single Gauge Co2 Regulator
  This Regulator works with any Co2 Tank with a CGA-320 valve. The single gauge measures PSI indicating how much Co2 pressure is inside the keg. Adjustable output pressure 0-60 psi. 3000 psig Max Primary Inlet. 60 psig Safety Relief Valve R82. Female CGA-320 connection. Ball valve outlet w/ 5/16" OD Hose Barb connection. Total ports = (2) Primary 1/4" FNPT ports, (2) Secondary 1/4" FNPT ports. UL Listed, Compressed Gas Regulator - for use w/ Air, Co2 and Inert Gases.
• Includes 5 feet of 5/16 Inch I.D. Draft Beer Line Assembly with 2 Snap Clamps
  The standard length is 5 feet of 5/16" I.D. Blue Air/Co2 Tubing made of Themoplastic Vinyl Hose (Super Vinyl). This tubing will not rot, swell or dry out and is unaffected by normal cleaning compounds. This air line assembly comes with two Plastic Snap Clamps with a reusable clamp design.
• Includes D system Lever Handle Keg Coupler which can Tap all Domestic Kegs
  This is a Commercial Grade Lever Handle Keg Coupler. The DKC146SLDB is compatible with all domestic brand kegs. This Keg Tap works with all American "D" System Sankey Kegs. This coupler features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg all you have to do is pull out and then down on the lever handle to properly couple the keg. This Keg Coupler can be swapped out to a Home Brew Coupler for no additional cost.
• Includes a 3" Diameter Chrome Plated Metal Draft Tower
  The Tower is a commercial grade Single Column, Single Faucet, 3" Diameter, Chrome Plated Metal Draft Tower. This Tower comes complete with a Chrome Plated Faucet with Brass Lever and 5 Feet of 3/16 Inch I.D. Clear Beer Tubing that ends in a Nozzle & Hex Nut Assembly that connects to all standard keg couplers. This Tower is mounted using the gasket and four screws that are included.
• Includes Chrome Beer Faucet with Brass Lever
  This premium quality faucet features a forged brass body with a highly polished chrome finish. This faucet has a brass shaft assembly and lever with a Teflon ball washer that ensures smooth operation. The brass lever has standard threading that is compatible with most branded tap handles.
• 5.2 Cu. Ft. Capacity
• Product Dimensions: 33"H x 20-12/16"W x 23-14/16"D
• Black Cabinet with Stainless Steel Look Finished Door
• Mechanical Temperature Control
• Co2 tank and all hardware included (Co2 requires charging)
• Automatic Defrost
• Scratch resistant work top
• Reversible Door Hinge
• Chrome Guard Rail included
• Black-Chrome Beer Tower Dispenser
• Drip Tray included
• Casters included for easy portability
• 2 Steel Wire Shelves included for conversion to a Large Capacity All Refrigerator

WARRANTY INFORMATION