Danby DBF163SS-1 Kegerator Full Size Beer Cooler with Stainless Steel Door

The DBF163SS-1 5.8 Cu. Ft. Full Size Single Faucet Kegerator by Danby takes beer drinking to a whole new level! With a Stylish Black Cabinet, Stainless Steel Door, and a Chrome Black Tower, this Keg Cooler will look great in any room in your home. With its Front Mounted Electronic Temperature Control with Blue LED Display you will never have to guess or wonder what temperature your keg is currently being stored at. Knowing your temperature is a desirable feature in a Kegerator because your beer foam is directly related to the temperature of your Keg.

Equipped with a complete Direct Draw Kit for D System Domestic Kegs, this Draft Beer Cooler can hold all three sizes of kegs--including Full-Sized or Pony Sized Kegs. If you do not plan on using your Kegerator for awhile, you have the option of converting your Kegerator into a Counter High Refrigerator with some Adjustable Plastic Shelves. Strong Casters included with the Keg Beer Cooler will allow you to easily move your Kegerator to any place in your home. With this DBF163SS-1 Single Faucet Full Size Kegerator Keg Beer Cooler by Danby, you will enjoy serving yourself and your guests ice cold domestic beer for years to come!

This Kegerator comes with all the parts and accessories you need to get it up and running in no time! Included in the kit is a 5lb Aluminum Co2 Tank--the preferred size of many brewers. The Co2 tank is shipped empty and does not come filled. You will need to get your Co2 Tank--for your Kegerator--filled locally. When filled, the 5lb tank is good for approzimately 5-6 Full Kegs.

Additional features of this Single-Tap Full-Size Danby DBF163SS-1 Kegerator include a Field Reversible Door, Automatic Defrost, Scratch Resistant Work Top, Chrome Guard Rail, and Plastic Drip Tray.

• The Danby DBF163SS-1 Kegerator features a Black Cabinet with Decorative Stainless Steel Door
• This Keg dispenser comes with a complete Direct Draw Kit for D System Kegs. This Keg Tap system comes with all the commercial grade components needed to tap a domestic keg.
• Includes a brand new aluminum 5 lb. Aluminum Co2 Tank
  This Tank is produced from high strength aluminum alloy 6061-T6. This is superior to a steel tank because it will not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cyldiners are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators. Average fill good for 5-6 Kegs depending upon your fill. (5.5" diameter, 18.25" Height).
• Includes Single Gauge Co2 Regulator
  This Regulator works with any Co2 Tank with a CGA-320 valve. The single gauge measures PSI indicating how much Co2 pressure is inside the keg. Adjustable output pressure 0-60 psi. 3000 psig Max Primary Inlet. 60 psig Safety Relief Valve R82. Female CGA-320 connection. Ball valve outlet w/ 5/16" OD Hose Barb connection. Total ports = (2) Primary 1/4" FNPT ports, (2) Secondary 1/4" FNPT ports. UL Listed, Compressed Gas Regulator - for use w/ Air, Co2 and Inert Gases.
• Includes 5 feet of 5/16 Inch I.D. Draft Beer Line Assembly with 2 Snap Clamps
  The standard length is 5 feet of 5/16" I.D. Blue Air/Co2 Tubing made of Themoplastic Vinyl Hose (Super Vinyl). This tubing will not rot, swell or dry out and is unaffected by normal cleaning compounds. This air line assembly comes with two Plastic Snap Clamps with a reusable clamp design.
• Includes D system Lever Handle Keg Coupler which can Tap all Domestic Kegs
  This is a Commercial Grade Lever Handle Keg Coupler. The DBF163SS-1 is compatible with all domestic brand kegs. This Keg Tap works with all American "D" System Sankey Kegs. This coupler features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg all you have to do is pull out and then down on the lever handle to properly couple the keg. This Keg Coupler can be swapped out to a Home Brew Coupler for no additional cost.
• Includes a 3" Diameter Chrome Plated Metal Draft Tower
  The Tower is a commercial grade Single Column, Single Faucet, 3" Diameter, Chrome Plated Metal Draft Tower. This Tower comes complete with a Chrome Plated Faucet with Brass Lever and 5 Feet of 3/16 Inch I.D. Clear Beer Tubing that ends in a Nozzle & Hex Nut Assembly that connects to all standard keg couplers. This Tower is mounted using the gasket and four screws that are included.
• Includes Chrome Beer Faucet with Brass Lever
  This premium quality faucet features a forged brass body with a highly polished chrome finish. This faucet has a brass shaft assembly and lever with a Teflon ball washer that ensures smooth operation. The brass lever has standard threading that is compatible with most branded tap handles.
  • Beer Keg Capacity Options1/8 Keg, 1/4 Keg, 1/2 Keg
  • The Co2 Tank can be mounted on the back or placed inside.
  • Accommodates 1/2 (60 liter) beer kegs
  • Black Cabinet with Stainless steel door
  • Converts to a 5.8 cu.ft. (164.2) liter capacity all refrigerator
  • Front mount electronic temperature control with blue LED display
  • Co2 tank and all hardware included (Co2 requires charging)
  • Automatic defrost
  • Scratch resistant work top
  • Reversible door hinge
  • Chrome guard rail included
  • Chrome beer tower dispenser
  • Same cabinet as model DKC645BLS
  • Plastic Drip tray included
  • Optional swivel casters for easy portability

  WARRANTY INFORMATION

• 12 months parts and labor
• In-Home Service.

UPC: 608729691013