Haier HBF05EABNK Full-Size Kegerator - Black Beer Dispenser

Enlarge Haier HBF05EABNK Full-Size Kegerator - Black Beer Dispenser
Enlarge Image
Haier HBF05EABB CLosedHaier Black KegeratorHaier HBF05EABB Door Open Haier HBF05EABNK BackHaier HBF05EABNK Top Drip Tray
Haier HBF05EABNK Pony KegHaier HBF05EABNK Top TowerHaier HBF05EABNK Temperature

Haier HBF05EABNK Kegerator / Full size kegerator / Convertible to an all refrigerator with two shelves / Comes complete with necessary draft beer equipment / Easy Roll Casters

List Price: $742.17
Regular Price: $593.74
Sale Price: $474.99 You Save $118.75 (20%)
Availability: IN STOCK (usually ships within 24 hours)
Quantity:  
based on 69 Reviews
5
The Haier HBF05EABNK Kegerator is a full size kegerator with the ability to be turned into an all refrigerator with two shelves. In addition to coming complete with all the necessary draft beer equipment to pour fresh draft beer straight from the keg, this kegerator can easily be converted to a regular refrigerator.

Commercial Configuration.

The Haier HBF05EABNK Kegerator is designed for home use so it operates with quiet and energy efficiency in mind. 2 1/2" casters make this unit very easy to move from your bar to your patio. This unit also comes with an attractive metal safety rail to help keep mugs and glasses from sliding off. This unit comes with everything you need except the keg. You will need to get the CO2 tank filled locally. You should look up gas suppliers in your local yellow pages to find a place to get the tank filled. A full CO2 tank should last about 5 to 6 full size kegs.

Home Brew Configuration.

The Haier Kegerator cabinet can fit one Full Size, Pony or Quarter Slim Keg, two 5 gallon commercial kegs along with one 5 gallon homebrew keg or up to three 5 gallon homebrew kegs.

Keg Capacity Chart.

  • Converts to 6.4 cu. ft. Beverage Center
  • Includes 2 Full-width Wire Shelves
  • Large enough to hold all full size kegs (Including Coiors, Miller and Many addditional Brands).
  • Holds: 1/2 barrels / Full Size Kegs (15.5gal), 1/4 barrels / Ponies (7.75gal)
  • Black Cabinet with Black Exterior (black door), Rounded corners door style
  • Thermostatic temperature control keeps temperature in range of 34°F-50°F
  • Heavy duty casters for mobility
  • Removable Drip Tray with Grill to Collect spills
  • Heavy Duty Worktop & Cabinet
  • Chrome Guard Rail to Protect Your Mugs and Glasses from Sliding Off
  • 15" Chrome Tower
  • Stainless steel interior floor mat for long lasting durability and easy glide of beer keg
  • Two removable wire shelves that allow you to convert this beer cooler into a refrigerator
  • 5 lb. Co2 Tank, Single Gauge Regulator, and Sankey Keg Coupler
  • Gas Hose / Beer Tubing / Washers & Clamps
  • Textured serving counter top
  • UL approved & listed
  • All dispensing accessories are UL recognized components

WARRANTY INFORMATION

  • 1 year parts and labor.
  • Compressor - 5 Years Parts Only.

UPC: 688057300108
Dimensions
Height33 1/4"
Width23-11/16"
Depth23-15/16"
Weight
Unit Weight96.8 lb.s
Shipping Weight110
Warranty
Labor1 Year
Parts1 Year
Compressor (Parts Only)5 Year
Key Features
Built-in CapableNo
Security LockNo
Keg CouplerNo
RegulatorSingle Gauge
CO2 Tank5 lb.
Cleaning KitNo
Outdoor UseNo
Commercial UseNo
Keg Storage Capacities
Full Size / 1/2-BarrelHolds 1
Pony Size / 1/4-BarrelHolds 1
1/4-Barrel SlimHolds 1
1/6-BarrelHolds 2
5 gal. Ball/Pin Lock KegHolds 3
Exterior
CabinetBlack
Drip TrayBlack Plastic
Guard RailChrome
CastersYes
Draft Beer Tower
Number of Faucets1
MaterialChrome
Height9 1/4'
Diameter2 1/2"
Door
Color / MaterialBlack
Number of Doors1
Door HandleNo
Field ReversibleNo
Accepts Custom Overlay PanelNo
Cooling System
TypeCompressor
Defrost SystemManual
Front VentilationNo
Controls
Adjustable ThermostatYes
DigitalNo
Electrical
Electrical Requirements115v/60hz
Running Amps1.7 A
PDFProduct Manual (PDF)
PDFDispense Kit Assembly Manual

Haier HBF05EABNK Full-Size Kegerator - Black Beer Dispenser Reviews

Average Customer Rating:
(5)
(based on 69 reviews) 
Ice Cold Beer
by:Geddy (12-05-2013)
Wisconsin
Comments:Nothing beats a nice cold beer and this kegerator provides just that
Bottom Line:I would recommend this product.
 
Well worth the Stainless steel and dual
by:Doc (02-21-2013)
Chesterfield, Missouri
Comments:Well worth the upcharge for the stainless steel front and the dual faucet. Installation was easy, but be sure to use the back flow valves (silicone rubber thingies)... I though they were packing material and threw them out... had to order replacements.
I bought a indoor/outdoor thermometer to monitor temperature in the unit... works well, easy installation. I chose to mount the CO2 cylinder externally (easy to drill hole in the back of the unit). I also bought a honeywell thermostat that overrides the Haier thermostat that had too much variation. With the temperature monitor and the new thermostat the unit is holding at 38 degrees +/- 3 degrees, which is very good.
Beverage Factory is great on not only price, but the packaging is superb, and shipping is fast. I needed to call customer service regarding the back flow valves and they were very helpful in securing replacements.
All in all a very good shopping experience.
Bottom Line:I would recommend this product.
 
Nice product
by:Doc (02-08-2013)
Chesterfield, Missouri
Comments:Delivered on Feb 7th, up and running on Feb 8th. Some difficulty finding a place for CO2, most sources were not close to me and all want to exchange the empty cylinder for a full cylinder. Prices for exchange cylinder in my area are between $12 - $18. Drilled a 1 inch hole in the back of the unit to be able to keep the CO2 cylinder outside the unit (its better this way because its easier to get to the regulator to adjust pressure as needed).
Also installed a Taylor indoor/outdoor thermometer in order to monitor temperature inside the unit (put the temp probe in through the hold drilled for the CO2 hoses). Plugged the drilled hole with silicone sealer.
After set-up and over the next 8 hours, adjusted the thermostat. Needed small adjustments until the inside temperature was between 33 deg and 41 deg. After installation of my first keg, the temperature does not seem to vary as much (the keg metal acts as a moderator of temperature so there are not as wide swings in temp. I expect when my second keg is installed temperature regulation will be even better.
Running the CO2 regulator at 8 psi, and this seems to be a good setting.
Installed a tower cooler (search internet) and this inexpensive unit certainly keeps the beer from foaming excessively due to warm tower or upper hoses/faucet.
Summary: Good kegerator for the money. Easy to assemble. No problems getting cold enough. Quiet running. If thinking of purchasing you may want to consider buying an indoor/outdoor thermometer and a tower cooler.

Bottom Line:I would recommend this product.
 
Wonderful machine!!
by:Mitch M (01-02-2013)
Southern Il.
Comments:Got this as a gift from my girlfriend. After reading reviews I had mixed feelings about this brand but had no desire to spend $800+ on a kegerator. Received the item Dec. 29th after I was promised a January 3rd delivery date so that was the first plus!! Directions are not the best for assembling the item but if you have ever made ANYTHING with a drill and a few bolts/wing nuts it is basically self explanatory. Read some reviews about the thermostat not getting cold enough so I took extra precaution and let the fridge sit 48 hours before plugging the unit in. Plugged the unit it and let it set at the normal setting for about 30 hours. Tapped my first 1/2 barrel and had a HUGE leak in my regulator (which was one of the major complaints I've read in many reviews... So this was expected) I have a decent knowledge/history of psi regulators and gas lines so I took about 2 hours out of my day to fix the regulator and lines... Cranked my thermostat to the lowest setting and put my CO2 a little higher than recommended just to make sure I don't lose pressure and had ICE cold beer with perfect carbonation and perfect lacing and head retention from about the 3rd or 4th pour (adjusting settings for personal preference). I believe that the other negative reviews have to be from people who got too eager with the product and hooked up the unit to early and didn't allow the unit to sit at the normal setting long enough for the unit to acclimate to the surrounding temperature. I would give this unit 6 stars if I could. If you have a decent understanding of refrigerator mechanisms you will feel the same way. I just poured a full pint after this unit has been sitting for 2 days without a single poor and I'm surprised there aren't ice chips in the mug it's so cold. Great product haier!!!
Bottom Line:I would recommend this product.
 
Great first kegerator
by:Dasboot (09-19-2012)
Houghton, Michigan
Comments: Had this kegerator for 1 year at college (so far). Never had a problem with the refrigeration acting up. In fact it froze about 7-8 gallons of beer not long ago from having the temp too low. Took like 4 days with the kegerator off and door open to thaw it. This kegerator fits all oversized kegs with room to spare. This thing has plenty of room inside to fit the 5lb tank. The 5lb tank lasted me 15 kegs plus I carbonated 2 home brew corny kegs, pretty sure it still has a little left. I keep the CO2 at like 3 for the crappy light beers when i'm drinking and when i'm done jack it up to 10 or so.

Messed up, didn't get the drip tray. Get the drip tray, its a damn good deal, they are a minimum of $33 online + shipping. If you already have a fridge just drill a hole in it and make your own, save yourself $300 plus $100 shipping. Overall it performs well for the price, it should put you through college. Don't have a fridge/want a kegerator: get this and get drunk
Bottom Line:I would recommend this product.
 
Shipping Calculator
Enter Your Shipping Zip Code:
Shipping Options
Please enter a zip code.
All charges are based on a quantity of 1.
Click "Add to Cart" above to change quantities
and make actual ship method selection.

Available Options:

SPECIFY DRAFT TOWER CHOICE (You will need to drill new screw holes for an upgraded tower)
Choose Draft Tower Chrome Plated Metal 2 1/2" Tower (Included) [more info] +$0.00
Polished Stainless Steel 3" Tower [more info] +$10.00
Polished Stainless Steel 3" Tower (100% Stainless Contact) [more info] +$25.00
Brushed Stainless Steel 3" Tower (100% Stainless Contact) [more info] +$30.00
Polished Stainless Steel 3" Tower with Perlick 630SS [more info] +$35.00
Snake Tower with Chrome Finish [more info] +$40.00
Polished Brass 3" Tower [more info] +$25.00
Remove Draft Tower from Order (No Thanks Already Have One) -$15.00

OPTIONAL DRIP TRAY UPGRADE (Big Savings When Purchased with Kegerator)
Optional DRIP TRAY Upgrade Upgrade to 12 Inch Long Surface Mount Drip Tray [more info] +$22.00
Upgrade to 12 Inch Drip Tray with Long Drain [more info] +$35.00
Surface Mount Drip Tray with Column Cut-Out - No Drain [more info] +$49.95
Surface Mount Drip Tray with Column Cut-Out - With Drain [more info] +$59.95
12 Inch Long Surface Mount Drip Tray with Brass Grill [more info] +$94.95
Surface Mount Drip Tray with Column Cut-Out - Brass Grill [more info] +$209.95

SPECIFY KEG COUPLER (Kegerator Includes D System Coupler)
Default D System Keg Coupler Lever Handle (Included) [more info] +$0.00
Select a S System European Keg Tap Coupler (Import Kegs) [more info] +$5.00
Select Ball Lock Home Brew Keg Tap [more info] +$0.00
Select Pin Lock Home Brew Keg Tap [more info] +$0.00
Select Perlick Lo-Boy Low Profile D System Keg Tap Coupler [more info] +$34.95
Remove Keg Coupler from Order (No Thanks Already Have One) -$10.00

SPECIFY CO2 REGULATOR (Kegerator Includes Single Gauge Regulator)
Single Gauge Regulator (Included) [more info] +$0.00
Upgrade to Pro Series Commercial Dual Gauge Co2 Regulator [more info] +$9.00
Remove CO2 Regulator from Order (No Thanks Already Have One) -$10.00

SPECIFY CO2 TANK
5 lb. Co2 Tank (Included - Comes Empty) [more info] +$0.00
Upgrade to 10 lb. Co2 Tank (May have to Place Outside Unit) [more info] +$17.95
Remove Co2 Tank from Order (No Thanks Already Have One) -$35.00

OPTIONAL 2ND KEG COUPLER (If you Plan on Tapping Import or Home Brew Kegs)
Select D System Keg Tap - Black Lever Handle - KT85D-L [more info] +$25.95
Select S System Keg Tap Coupler - Black Lever Handle - KT86S-L [more info] +$31.99
Select Ball Lock Home Brew Keg Tap Complete Set [more info] +$14.99
Select Pin Lock Home Brew Keg Tap Complete Set [more info] +$13.95
Select U System Keg Tap Coupler - Lever Handle - CH5300U [more info] +$63.95
Select Perlick Lo-Boy Low Profile D System Keg Tap Coupler w/ Pressure Relief - 40030 [more info] +$51.95

OPTIONAL CLEANING KIT (Important To Clean Lines after each Keg)
Optional CLEANING KIT! Add Economy Beer Line Cleaning Kit [more info] +$21.95
Add Beer Cleaning Kit - 1 Qt. Bottle w/ 33 oz. Cleaner [more info] +$54.99
Kegco Deluxe Hand Pump Pressurized Keg Beer Kegerator Cleaning Kit w/ 32 oz. Cleaner [more info] +$49.99
Draftec Deluxe Hand Pump Pressurized Keg Beer Kegerator Cleaning Kit w/ 32 oz. Cleaner [more info] +$51.99
Add Complete D System Pressurized Cleaning Kit [more info] +$102.95

OPTIONAL TAP HANDLE (Plastic Faucet Knob is Included with Kegerator)
Chalkboard Beer Tap Handle [more info] +$38.95
White Board Dry Erase Beer Tap Handle [more info] +$39.95
T180-7 - Twist - 7" BOD (Branding On Demand) Tap Handle [more info] +$42.95
C100-4-M - 4" BOD (Branding On Demand) Tap Handle, Metal [more info] +$21.99
P180-7 - Pebble - 7" BOD (Branding On Demand) Tap Handle [more info] +$43.95
C100-4 - 4" BOD (Branding On Demand) Tap Handle [more info] +$18.50
C150-6 - 6" BOD (Branding On Demand) Tap Handle [more info] +$15.95

OPTIONAL FAUCET LOCKS
Add Optional FAUCET LOCK Add Slide-on Faucet Lock [more info] +$41.99
Add Wrap Around Faucet Lock [more info] +$53.99

OPTIONAL HOMEBREW KEG
Brand New - Kecgo 5 Gallon Stainless Steel Keg [more info] +$79.95

Optional Extended Warranty
New Leaf ServicePro 1 Year Extended Warranty [more info] +$24.99
New Leaf ServicePro 3 Year Date of Purchase Warranty [more info] +$49.99
New Leaf ServicePRO 5 Year Date of Purchase Warranty [more info] +$99.99
New Leaf ServicePRO 3 Year Date of Purchase Commercial Warranty [more info] +$145.98
New Leaf ServicePRO 5 Year Date of Purchase Commercial Warranty [more info] +$281.98



    


Top Sellers

Kegco K309B-1 Kegerator

Marvel 61HK-BS-X-1 Built-in Kegerator with Black Cabinet & Stainless Steel Door
Summit SBC490BI Built-in Full-Size Keg Beer Dispenser in Black

Kegco K309SS-1 Kegerator