Full Size Kegerator with Black Cabinet and Stainless Steel Door

Regular Price: $579.99
You Save $116.00 (20%)

The Kegco K199SS-1 Kegerator is a great Single-Tap Full Size Keg Beer Dispenser at an excellent value price! Equipped with a complete Direct Draw Kit for D System Domestic Kegs, this Beer Cooler houses your Kegs in an All-Black Cabinet with an Elegant Stainless Steel Door. Two Removable Wire Shelves allow you to easily convert this Kegerator into an All-Refrigerator/Beverage Center. With 2-1/2" Casters you can move this stylish Kegerator to any room in your home, from the Kitchen, to the home bar, to the Patio. So sit back, relax, and enjoy serving your Favorite Draft Beer with style and ease from any place in your home!

Commercial Configuration.

This Kegco K199SS-1 comes complete with all the necessary Draft Beer equipment you need to pour Fresh Draft Beer straight from your keg. In addition to serving beer, it can be used for soda dispensing or serving kombucha with a few minor upgrades. Included with this beer fridge is a 5lb Aluminum Co2 Tank, a Single Gauge Regulator, a Sankey Keg Coupler, and a 15" Chrome Plated Metal Draft Beer Tower that will impress any Beer Aficionado. The Single Gauge Regulator measures Pounds Per Square Inch (PSI), features a Safety Blow Off at 55-65 PSI, and comes with a flow control inlet nipple filter as well as a permanent Quad-Ring Inlet Seal. The Sankey Keg Coupler is designed to fit most of your favorite Domestic beer kegs. Please Note: The lightweight, 5lb Aluminum Co2 Tank is the preferred size of many brewers. It is shipped empty and does not come filled. You will need to get your Co2 Tank--for your Kegerator--filled locally. When filled, the 5 lb tank is good for approximately 5-6 full size kegs.

Home Brew Configuration.

These Draft Beer Dispensers are created for in home use and are both quiet and energy efficient, making the storing of your kegs in your home a more pleasant experience over and above what some other kegerators would. Though quiet and energy efficient this Kegerator has the capacity to hold Full-Size Kegs (15.5 gal), 1/4 Beer Barrels (7.75 gal) and 5 gallon kegs.

Additional Features of Single-Tap Full-Size Kegco K199SS-1 Kegerators include a Removable Drip Tray to collect spills, a Stainless Steel Interior floor mat for long lasting durability and easy glide of beer keg, a gas hose, beer tubing, washer, clamps, a textured serving counter top and an attractive Metal Safety Rail to help keep your beer mugs and glasses from sliding off.

Keg Capacity Chart.

Does Not Fit These Kegs.This keg cooler will hold one Full Size, Straight Pony or Quarter Slim Keg and up to two Sixth Slim, Strap Handle or Rubber Home Brew Kegs. Please Note: It will not fit Bevel or Rubber Kegs that are wider in the middle than at the top or bottom. These are commonly used by Coors and Miller Brewing Companies.

  • Kegco MDK-199SS-01 Kegerator and Single Faucet Draft Beer Dispense System
  • Black Cabinet with Decorative Stainless Steel Door
  • This Keg dispenser comes with a complete Direct Draw Kit for D System Kegs. This Keg Tap system comes with all the commercial grade components needed to tap a domestic keg.
  • Includes a brand new aluminum 5 lb. Aluminum Co2 Tank
    This Tank is produced from high strength aluminum alloy 6061-T6. This is superior to a steel tank because it will not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cyldiners are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators. Average fill good for 5-6 Kegs depending upon your fill. (5.5" diameter, 18.25" Height).
  • Includes Single Gauge Co2 Regulator
    This Regulator works with any Co2 Tank with a CGA-320 valve. The single gauge measures PSI indicating how much Co2 pressure is inside the keg. Adjustable output pressure 0-60 psi. 3000 psig Max Primary Inlet. 60 psig Safety Relief Valve R82. Female CGA-320 connection. Ball valve outlet w/ 5/16" OD Hose Barb connection. Total ports = (2) Primary 1/4" FNPT ports, (2) Secondary 1/4" FNPT ports. UL Listed, Compressed Gas Regulator - for use w/ Air, Co2 and Inert Gases.
  • Includes 5 feet of 5/16 Inch I.D. Blue Air Line Assembly with 2 Snap Clamps
    The standard length is 5 feet of 5/16" I.D. Blue Air/Co2 Tubing made of Themoplastic Vinyl Hose (Super Vinyl). This tubing will not rot, swell or dry out and is unaffected by normal cleaning compounds. This air line assembly comes with two Plastic Snap Clamps with a reusable clamp design.
  • Includes D system Lever Handle Keg Coupler which can Tap all Domestic Kegs
    This is a Commercial Grade Lever Handle Keg Coupler. The K199SS-1 is compatible with all domestic brand kegs. This Keg Tap works with all American "D" System Sankey Kegs. This coupler features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg all you have to do is pull out and then down on the lever handle to properly couple the keg. This Keg Coupler can be swapped out to a Home Brew Coupler for no additional cost.
  • Includes a 3" Diameter Chrome Plated Metal Draft Tower
    The Tower is a commercial grade Single Column, Single Faucet, 3" Diameter, Chrome Plated Metal Draft Tower. This Tower comes complete with a Chrome Plated Faucet with Brass Lever and 5 Feet of 3/16 Inch I.D. Clear Beer Tubing that ends in a Nozzle & Hex Nut Assembly that connects to all standard keg couplers. This Tower is mounted using the gasket and four screws that are included.
  • Includes Chrome Beer Faucet with Brass Lever
    This premium quality faucet features a forged brass body with a highly polished chrome finish. This faucet has a brass shaft assembly and lever with a nylon ball washer that ensures smooth operation. The brass lever has standard threading that is compatible with most branded tap handles.
  • PLEASE NOTE: Coors Kegs will not fit into this Kegerator.
  • Measures at 33"H x 20"W x 25.5"D
  • Reversible Door
  • the Kegco K199SS-1 Beer Dispenser comes with 2 full-width wire shelves and a hole plug which allows you to convert kegerator into a Compact Refrigerator.
  • Includes 2 Full-width Wire Shelves
  • Holds: 1/2 barrels / Full Size Kegs (15.5gal), 1/4 barrels / Ponies (7.75gal)
  • Removable Drip Tray with Grill to Collect spills
  • Chrome Guard Rail to Protect Your Mugs and Glasses from Sliding Off
  • Stainless Steel Interior Floor Mat for long lasting durability and easy glide of beer keg.
  • Textured serving counter top.
  • 25% more energy efficient design saves you money each month
  • UL Listed


  • 1 year parts and labor.
  • 5 years on compressor (parts only)

  • UPC: 608938598196
    Key Features
    Built-in CapableYes
    Security LockYes
    Keg CouplerYes
    Outdoor UseYes
    Commercial UseYes
    Keg Storage Capacities
    Full Size / 1/2-BarrelHolds 1
    Pony Size / 1/4-BarrelHolds 1
    5-Liter / Mini KegHolds 2
    CabinetBlack Cabinet
    Drip TrayYes
    Guard RailYes
    Draft Beer Tower
    Number of Faucets1
    Color / MaterialStainless Steel
    Number of Doors1
    Door HandleRecessed
    Field ReversibleYes
    Accepts Custom Overlay PanelNo
    Cooling System
    Front VentilationNo
    Adjustable ThermostatYes
    Electrical Requirements115v/60hz
    PDFInstruction Manual
    PDFDispense System Assembly Manual
    PDFParts Diagram

    Full Size Kegerator with Black Cabinet and Stainless Steel Door Reviews

    Average Customer Rating:
    (based on 47 reviews) 
    best bang for your buck!
    by:Ozzie (01-12-2016)
    York Harbor. Maine
    Comments:I love the two sixth slim keg setup for beer choice and endless microbrew selections to choose from. The co2 setup is easy and get a thermometer to get the perfect temperature with no foam!
    Bottom Line:I would recommend this product.
    Simple, Quick, Easy, Great value!
    by:Jeff (01-05-2016)
    Mt. Laurel, NJ
    Comments:Once you decide that a kegerator is the way to go, this company makes a quality product, great directions, simple and easy set up, and now I own two of them. I have never needed customer service because it just works. Isn't that what everyone wants?
    Bottom Line:I would recommend this product.
    Somewhat disappointing
    by:Sandie (08-11-2015)
    Comments:This was my husband's birthday gift after we completed our deck. It looks great, there was no damage. It foams really badly and pours slowly. I got larger CO2 tank and received the holder for the smaller one. They don't have a larger holder which is frustrating. Customer service with the foaming problem was not good so I googled solutions. It's better, still not good.
    Bottom Line:I would not recommend this product.
    First Kegerator, so far a great buy!
    by:HWJ Magnificent (07-13-2015)
    Corning, New York
    Comments:Never had a kegerator before, this is my first. Started making my own beer a few years ago and really wanted to try home-brew kegs. Did a little research before purchasing. Learned that with some of the other brands that are on the market, frequent complaints about the kegerator are that they can make loud noises, don't chill the beer cold enough, and can be difficult to regulate the pour. Also common complaints are the length of time for shipping and receiving and often the damage that happens in the shipping process. I read the reviews on the Kegco K199B-2 and it rated pretty well by most reviewers so I was convinced to go ahead with my purchase, my only hesitation was that I live in New York and this product was being shipped from San Diego, CA. In the back of my mind I'm thinking that it will take a month to arrive and will probably suffer all kinds of damage. Well let me just say that I was in complete shock when I received a phone call 5 days after placing my order, from a local trucking company wanting to know when they could drop off my kegerator. The kergerator went by air freight from San Diego to New York and was at the trucking company in 5 days and that was with a weekend in there. The trucking company delivered it to my garage, it was on a pallet. Upon inspection, I found it to be in perfect condition. No scratches, no dents, do dings, and all extra parts present and accounted for. Next test, how loud is it going to be? Well I can't even tell that it's running. I can't hear it come on or go off; it doesn't make any loud popping sounds like other kegerators. I set the temperature on the highest setting and stuck a thermometer inside, let it run for a day, the temperature was at 28degrees, bumped it down to the next setting and got it to 31 degrees. No problems with getting this kegerator to a nice cold temp. I tapped my first Micro Brew Sixth Slim keg and after adjusting the PSI and temperature, have been super successful with one beautiful pour after the next! Now I'm looking forward to tapping my own home brew. I've not owned this for very long but so far this has been a great kegerator.
    Bottom Line:I would recommend this product.
    Great appliance !!
    by:Neto (06-16-2015)
    El Paso, TX.
    Comments:Works great, nice to have draft beer at home, very quiet.
    I was surprised of the low temps it can deliver.
    Ordered it with the 5 lbs. CO2 tank (enough for me), (2) 5 gal kegs and dual regulator, it all arrived as described.

    KEGCO can put more effort on the instructions/manuals and parts supplied, it was not rocket science to put all together but clearer comments would help.

    Thanks to all the internet folks who describe how to cool the beer tower, the only addition I made was to install a couple of 1/2" copper pipes to keep the beer lines cool, sprayed the inside of the tower with poly foam and that was it: a cheap way to keep your beer cool all the way from the keg to your glass...

    Now I'm happy-pouring brown ale and stout !!!

    Bottom Line:I would recommend this product.
    Shipping Calculator
    Enter Your Shipping Zip Code:
    Shipping Options
    Please enter a zip code.
    All charges are based on a quantity of 1.
    Click "Add to Cart" above to change quantities
    and make actual ship method selection.

    Labor - 12 Months

    Parts - 12 Months

    Compressor (Parts Only) - 60 Months


    Select Options

    This product has multiple options. Please select options and then add to cart at the bottom of the page.

    Image Item Qty Discount Price
    Full Size Kegerator with Black Cabinet and Stainless Steel Door Model: KC K199SS-1 20%$463.99

    Confirm Options:

    Chrome Plated Metal Tower (Included) +$0.00
    Polished Stainless Steel 3" Tower +$10.00
    Polished Stainless Steel 3" Tower (100% Stainless Contact) +$25.00
    Polished Stainless Steel 3" Tower with Perlick 630SS +$35.00
    Remove Draft Tower from Order (No Thanks Already Have One) -$15.00

    SPECIFY KEG COUPLER (Kegerator Includes D System Coupler)
    Default D System Keg Coupler Lever Handle (Included) +$0.00
    Select a S System European Keg Tap Coupler (Import Kegs) +$5.00
    Select Ball Lock Home Brew Keg Tap +$0.00
    Select Pin Lock Home Brew Keg Tap +$0.00
    Select Perlick Lo-Boy Low Profile D System Keg Tap Coupler +$34.95
    Remove Keg Coupler from Order (No Thanks Already Have One) -$10.00

    SPECIFY CO2 REGULATOR (Kegerator Includes Single Gauge Regulator)
    Pro Series Single Gauge Regulator (Included) +$0.00
    Upgrade to Pro Series Dual Gauge Co2 Regulator +$9.00
    Upgrade to Premium Dual Gauge Co2 Regulator +$10.00
    Upgrade to Commercial Grade Dual Gauge Regulator +$11.00
    Remove CO2 Regulator from Order (No Thanks Already Have One) -$10.00

    5 lb. Co2 Tank (Included - Comes Empty) +$0.00
    Upgrade to 5 lb. Tank with Red Finish +$5.00
    Upgrade to 10 lb. Co2 Tank (May have to Place Outside Unit) +$17.95
    Remove Co2 Tank from Order (No Thanks Already Have One) -$35.00

    OPTIONAL 2ND KEG COUPLER (If you Plan on Tapping Import or Home Brew Kegs)
    Select D System Keg Tap - Black Lever Handle - KT85D-L +$25.95
    Select S System Keg Tap Coupler - Black Lever Handle - KT86S-L +$31.99
    Select Ball Lock Home Brew Keg Tap Complete Set +$14.99
    Select Pin Lock Home Brew Keg Tap Complete Set +$14.99
    Select U System Keg Tap Coupler - Lever Handle - CH5300U +$63.95
    Select Perlick Lo-Boy Low Profile D System Keg Tap Coupler w/ Pressure Relief - 40030 +$55.95

    OPTIONAL CLEANING KIT (Important To Clean Lines after each Keg)
    Optional CLEANING KIT! Add Economy Beer Line Cleaning Kit +$21.95
    Add Beer Cleaning Kit - 1 Qt. Bottle w/ 33 oz. Cleaner +$54.99
    Kegco Deluxe Hand Pump Pressurized Keg Beer Kegerator Cleaning Kit w/ 32 oz. Cleaner +$49.99
    Add Complete D System Pressurized Cleaning Kit +$102.95

    Add Residential Kegerator Cover
    Kegco TX-2637 Residential Kegerator Cover +$49.99

    OPTIONAL TAP HANDLE (Standard Faucet Knob is Included)
    Chalkboard Beer Tap Handle +$38.95
    White Board Dry Erase Beer Tap Handle +$39.95
    T180-7 - Twist - 7" BOD (Branding On Demand) Tap Handle +$42.95
    C150-6 - 6" BOD (Branding On Demand) Tap Handle +$15.95

    Add Optional FAUCET LOCK Add Slide-on Faucet Lock +$41.99
    Add Wrap Around Faucet Lock +$53.99

    Brand New - Kegco 3 Gallon Strap Handle Keg +$89.99
    Brand New - Kecgo 5 Gallon Strap Handle Keg +$94.99
    Brand New - Kegco 5 Gallon Rubber Top Keg +$99.99
    5 Gallon Ball Lock Keg - Reconditioned Beer Keg +$69.99

    Add Residential Kegerator Cover
    Kegco TX-2637 Residential Kegerator Cover +$49.99

    Optional Extended Warranty
    I don't want an extended warranty +$0.00
    New Leaf ServicePro 1 Year Extended Warranty - Under 500 +$19.99
    New Leaf ServicePro 3 Year Date of Purchase Warranty - Under 500 +$39.99
    New Leaf ServicePRO 5 Year Date of Purchase Warranty - Under 500 +$79.99