Free Shipping

Kegco K199SS-1 Full Size Kegerator with Black Cabinet and Stainless Steel Door

Enlarge Kegco K199SS-1 Full Size Kegerator with Black Cabinet and Stainless Steel Door
Enlarge Image
Kegco K199SS-1 KegeratorKegco K199SS-1Kegco KegeratorK199SS-1 KegeratorK199SS-1 Beer Cooler
K199SS-1 Keg CoolerKegco KegeratorsK199SS-1 KegeratorsK199SS-1 Beer DispenserK199SS-1 Draft Beer Dispenser
K199SS-1 Beer FridgeKegco Draft Beer Dispensers

Kegco's K199SS-1 Kegerator features a Black Cabinet and Stainless Steel Door / Two Wired Shelves allow you to easily convert this Single Tap Kegerator into a regular Refrigerator / Reversible Door / Keg Cooler Holds up to a Full Size Keg / Includes everything needed to operate a Domestic D System Keg Tap Coupler / PLEASE NOTE: Coors Kegs will not fit into this Kegerator.

List Price: $764.06
Regular Price: $611.25
Sale Price: $489.00 You Save $122.25 (20%)
based on 38 Reviews

The Kegco K199SS-1 Kegerator is a great Single-Tap Full Size Keg Beer Dispenser at an excellent value price! Equipped with a complete Direct Draw Kit for D System Domestic Kegs, this Beer Cooler houses your Kegs in an All-Black Cabinet with an Elegant Stainless Steel Door. Two Removable Wire Shelves allow you to easily convert this Kegerator into an All-Refrigerator/Beverage Center. With 2-1/2" Casters you can move this stylish Kegerator to any room in your home, from the Kitchen, to the home bar, to the Patio. So sit back, relax, and enjoy serving your Favorite Draft Beer with style and ease from any place in your home!

Commercial Configuration.

This Kegco K199SS-1 comes complete with all the necessary Draft Beer equipment you need to pour Fresh Draft Beer straight from your keg. In addition to serving beer, it can be used for soda dispensing or serving kombucha with a few minor upgrades. Included with this beer fridge is a 5lb Aluminum Co2 Tank, a Single Gauge Regulator, a Sankey Keg Coupler, and a 15" Chrome Plated Metal Draft Beer Tower that will impress any Beer Aficionado. The Single Gauge Regulator measures Pounds Per Square Inch (PSI), features a Safety Blow Off at 55-65 PSI, and comes with a flow control inlet nipple filter as well as a permanent Quad-Ring Inlet Seal. The Sankey Keg Coupler is designed to fit most of your favorite Domestic beer kegs. Please Note: The lightweight, 5lb Aluminum Co2 Tank is the preferred size of many brewers. It is shipped empty and does not come filled. You will need to get your Co2 Tank--for your Kegerator--filled locally. When filled, the 5 lb tank is good for approximately 5-6 full size kegs.

Home Brew Configuration.

These Draft Beer Dispensers are created for in home use and are both quiet and energy efficient, making the storing of your kegs in your home a more pleasant experience over and above what some other kegerators would. Though quiet and energy efficient this Kegerator has the capacity to hold Full-Size Kegs (15.5 gal), 1/4 Beer Barrels (7.75 gal) and 5 gallon kegs.

Additional Features of Single-Tap Full-Size Kegco K199SS-1 Kegerators include a Removable Drip Tray to collect spills, a Stainless Steel Interior floor mat for long lasting durability and easy glide of beer keg, a gas hose, beer tubing, washer, clamps, a textured serving counter top and an attractive Metal Safety Rail to help keep your beer mugs and glasses from sliding off.

Keg Capacity Chart.

Does Not Fit These Kegs.This keg cooler will hold one Full Size, Straight Pony or Quarter Slim Keg and up to two Sixth Slim, Strap Handle or Rubber Home Brew Kegs. Please Note: It will not fit Bevel or Rubber Kegs that are wider in the middle than at the top or bottom. These are commonly used by Coors and Miller Brewing Companies.

  • Kegco MDK-199SS-01 Kegerator and Single Faucet Draft Beer Dispense System
  • Black Cabinet with Decorative Stainless Steel Door
  • This Keg dispenser comes with a complete Direct Draw Kit for D System Kegs. This Keg Tap system comes with all the commercial grade components needed to tap a domestic keg.
  • Includes a brand new aluminum 5 lb. Aluminum Co2 Tank
    This Tank is produced from high strength aluminum alloy 6061-T6. This is superior to a steel tank because it will not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cyldiners are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators. Average fill good for 5-6 Kegs depending upon your fill. (5.5" diameter, 18.25" Height).
  • Includes Single Gauge Co2 Regulator
    This Regulator works with any Co2 Tank with a CGA-320 valve. The single gauge measures PSI indicating how much Co2 pressure is inside the keg. Adjustable output pressure 0-60 psi. 3000 psig Max Primary Inlet. 60 psig Safety Relief Valve R82. Female CGA-320 connection. Ball valve outlet w/ 5/16" OD Hose Barb connection. Total ports = (2) Primary 1/4" FNPT ports, (2) Secondary 1/4" FNPT ports. UL Listed, Compressed Gas Regulator - for use w/ Air, Co2 and Inert Gases.
  • Includes 5 feet of 5/16 Inch I.D. Blue Air Line Assembly with 2 Snap Clamps
    The standard length is 5 feet of 5/16" I.D. Blue Air/Co2 Tubing made of Themoplastic Vinyl Hose (Super Vinyl). This tubing will not rot, swell or dry out and is unaffected by normal cleaning compounds. This air line assembly comes with two Plastic Snap Clamps with a reusable clamp design.
  • Includes D system Lever Handle Keg Coupler which can Tap all Domestic Kegs
    This is a Commercial Grade Lever Handle Keg Coupler. The K199SS-1 is compatible with all domestic brand kegs. This Keg Tap works with all American "D" System Sankey Kegs. This coupler features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg all you have to do is pull out and then down on the lever handle to properly couple the keg. This Keg Coupler can be swapped out to a Home Brew Coupler for no additional cost.
  • Includes a 3" Diameter Chrome Plated Metal Draft Tower
    The Tower is a commercial grade Single Column, Single Faucet, 3" Diameter, Chrome Plated Metal Draft Tower. This Tower comes complete with a Chrome Plated Faucet with Brass Lever and 5 Feet of 3/16 Inch I.D. Clear Beer Tubing that ends in a Nozzle & Hex Nut Assembly that connects to all standard keg couplers. This Tower is mounted using the gasket and four screws that are included.
  • Includes Chrome Beer Faucet with Brass Lever
    This premium quality faucet features a forged brass body with a highly polished chrome finish. This faucet has a brass shaft assembly and lever with a nylon ball washer that ensures smooth operation. The brass lever has standard threading that is compatible with most branded tap handles.
  • PLEASE NOTE: Coors Kegs will not fit into this Kegerator.
  • Measures at 33"H x 20"W x 25.5"D
  • Reversible Door
  • the Kegco K199SS-1 Beer Dispenser comes with 2 full-width wire shelves and a hole plug which allows you to convert kegerator into a Compact Refrigerator.
  • Includes 2 Full-width Wire Shelves
  • Holds: 1/2 barrels / Full Size Kegs (15.5gal), 1/4 barrels / Ponies (7.75gal)
  • Removable Drip Tray with Grill to Collect spills
  • Chrome Guard Rail to Protect Your Mugs and Glasses from Sliding Off
  • Stainless Steel Interior Floor Mat for long lasting durability and easy glide of beer keg.
  • Textured serving counter top.
  • 25% more energy efficient design saves you money each month
  • UL Listed


  • 1 year parts and labor.
  • 5 years on compressor (parts only)

  • UPC: 608938598196
    Key Features
    Keg CouplerYes
    Keg Storage Capacities
    Full Size / 1/2-BarrelHolds 1
    Pony Size / 1/4-BarrelHolds 1
    5-Liter / Mini KegHolds 2
    CabinetBlack Cabinet
    Drip TrayBlack Plastic
    Guard RailChrome
    Draft Beer Tower
    Number of Faucets1
    Height9 1/4"
    Diameter2 1/2"
    Color / MaterialStainless Steel
    Number of Doors1
    Door HandleRecessed
    Field ReversibleYes
    Accepts Custom Overlay PanelNo
    Cooling System
    Front VentilationNo
    Adjustable ThermostatYes
    Electrical Requirements115v/60hz
    PDFDispense System Assembly Manual
    PDFParts Diagram

    Kegco K199SS-1 Full Size Kegerator with Black Cabinet and Stainless Steel Door Reviews

    Average Customer Rating:
    (based on 38 reviews) 
    Wine on tap
    by:LJ (09-19-2014)
    Boston, MA
    Comments:We bought the kegorator to serve Define Wines rose' on tap ! It is the perfect addition to our pool house. Wheels so it can be used inside or out. Sleek design fits in with our other stainless appliances.
    Bottom Line:I would recommend this product.
    Kegco k199b-2
    by:Connie (09-09-2014)
    Oregon City
    Comments:It's our 1st dispenser so have nothing to compare to. Was easy for me to put together (I didn't put the kegs in, but got it ready), while other half at work. They guys did run buy the house to bring it in for me. I already had parts laid out. It was very simple to put together.
    All parts were there and arrived with no damage. Have 1st keg in and is carbonating just fine. Soon will instal the 2nd keg! So far so Good.
    Bottom Line:I would recommend this product.
    Very happy!!
    by:Leroy D Mercer (07-31-2014)
    Fishers, IN
    Comments:Built a custom bar-cabinet w/French doors to fit this in; rolls perfect with the casters! Keeps my beer cold and it's always available. Kegging my own beer is way better and faster than bottling! Friends and family love it too!
    Bottom Line:I would recommend this product.
    Great unit
    by:Wayne (06-20-2014)
    McLean, VA
    Comments:My Kegerator was delivered in great condition. All in I think it took 30-40 minutes to put everything together. I followed the instructions to let it sit for 8 hrs before plugging it in, then run at the coldest setting. It gets down to 38 degrees, which is perfect. After a week I'm kegged up and drinking tap beer! I timed a batch for the delivery of the kegerator and keg. Very happy with the unit to this point.
    Bottom Line:I would recommend this product.
    Fantastic after a little modification
    by:LordTakuban (06-14-2014)
    South Florida
    Comments:This came shipped and packaged really well from California to Florida and arrived in about a week from ordering. Setup was pretty simple, add the castors to the bottom (if you are not putting it under a counter), and attach the tower to the top. I won't go into the setup too much since you can find that info all over the place. I'll talk more about the modifications I did to make this really work well. For some more info, I've had this for a bout 6 months or less, but I have run about 8 to 10 1/6 kegs through it without any problems.

    First, the good...

    1. It is pretty quiet (in most circumstances)

    2. It cools the area to a nice mid to high 30* range without having to modify the thermostat.

    3. It will hold 2 1/6 kegs and a CO2 tank with big regulator and have room for a few extra little things (More on that later).

    4. It works and you get draft beer right in your house.

    Now the bad...

    1. It has a REALLY LOUD vibration that occurs only if it's in just the right angle/location/something. (Solution listed below)

    2. The cold plate makes a VERY LOUD popping sound. This is because it's too close to the back wall of the unit. (Solution listed below).

    3. It has no fans to circulate the cold air and the contents won't get as cold or as fast. (Solution listed below).

    4. The lines in the tower are still going to be warm. (Solution listed below).

    Solutions via modification:

    1. VIBRATION: I went to move it to try to find where exactly the vibration was coming from and after moving it maybe 1/4", it stopped and hasn't made the noise since. So placement is very important. I suspect you could still find what is vibrating and attach some dynamat or some other vibration dampening material if the location can't be altered.

    2. POPPING SOUND: For this, I used some spare automotive vacuum hose I had in the garage. I cut 4 pieces off at about 1/4" lengh. I then unscrewed the cold plate from the back wall and re-attached it with a piece of vacuum hose between the plate and wall. The screw went through the natural hole in the hose. Getting the screw back in the threaded hole in the back wall was a bit tricky on a couple, but not too bad. Now it rarely makes a popping sound at all.

    3. POOR CIRCULATION: I bought a AI-MPF80A2 Quiet Dual 80mm USB Fan that comes with 2 fans that are linked together with the same wire. I have one blowing from the left side toward the right by the cold plate. And the other is angled just to teh right of that one, but pointing upward. These circulate the air around the inside quite well and evenly cool the contents much quicker than without them. I only paid $15 for them and they are definitely worth it.

    4. TOWER IS WARM: I bought a tower cooler. Yes, you can make one yourself, but the amount of time you save by just buying one from someone else is worth it IMHO. I have this sitting next to the other fans (The base that is) with the blower hose just slightly into the tower area and zip-tied to the beer lines. This reduces that first pour foam that you often get due to the warmer temperature beer.

    I also bought some USB extension cables so I could run the power for the 2 fan accessories easily.

    Another modification (If you want to call it that) is I added a Indoor/Outdoor Digital Suction Cup Thermometer for about $7.00. The suction cup doesn't stick to anything in the kegerator, but it lets me sort of hang it on one of the kegs. It shows min and max temps for the day as well as current temp. I should probably buy a few more to keep as backups since they are so cheap. But this one has worked great the entire time I've had the kegerator and I have dropped it multiple times.


    So with those few modifications, this afordable Kegerator does really well and suits my needs perfectly. I might mount my CO2 tank outside and run a line in to the diverter that will still be inside the unit. But I'll need to get some motivation to do that first. :)

    I hope this was helpful. I would definitely recommend this unit to a friend and the modifications I did (All totaled were less than $75). Any other kegerator with those *features* built in would cost a LOT more than that.
    Bottom Line:I would recommend this product.
    Shipping Calculator
    Enter Your Shipping Zip Code:
    Shipping Options
    Please enter a zip code.
    All charges are based on a quantity of 1.
    Click "Add to Cart" above to change quantities
    and make actual ship method selection.

    Labor - 12 Months

    Parts - 12 Months

    Compressor (Parts Only) - 60 Months

    Available Options:

    Chrome Plated Metal Tower (Included) [more info] +$0.00
    Polished Stainless Steel 3" Tower [more info] +$10.00
    Polished Stainless Steel 3" Tower (100% Stainless Contact) [more info] +$25.00
    Brushed Stainless Steel 3" Tower (100% Stainless Contact) [more info] +$30.00
    Polished Stainless Steel 3" Tower with Perlick 630SS [more info] +$35.00
    Polished Brass 3" Tower [more info] +$25.00
    Remove Draft Tower from Order (No Thanks Already Have One) -$15.00

    OPTIONAL DRIP TRAY UPGRADE (Big Savings When Purchased with Kegerator)
    Optional DRIP TRAY Upgrade Upgrade to 12 Inch Long Surface Mount Drip Tray [more info] +$22.00
    Upgrade to 12 Inch Drip Tray with Long Drain [more info] +$35.00
    Surface Mount Drip Tray with Column Cut-Out - No Drain [more info] +$49.95
    Surface Mount Drip Tray with Column Cut-Out - With Drain [more info] +$59.95
    12 Inch Long Surface Mount Drip Tray with Brass Grill [more info] +$94.95
    Surface Mount Drip Tray with Column Cut-Out - Brass Grill [more info] +$209.95

    SPECIFY KEG COUPLER (Kegerator Includes D System Coupler)
    Default D System Keg Coupler Lever Handle (Included) [more info] +$0.00
    Select a S System European Keg Tap Coupler (Import Kegs) [more info] +$5.00
    Select Ball Lock Home Brew Keg Tap [more info] +$0.00
    Select Pin Lock Home Brew Keg Tap [more info] +$0.00
    Select Perlick Lo-Boy Low Profile D System Keg Tap Coupler [more info] +$34.95
    Remove Keg Coupler from Order (No Thanks Already Have One) -$10.00

    SPECIFY CO2 REGULATOR (Kegerator Includes Single Gauge Regulator)
    Single Gauge Regulator (Included) [more info] +$0.00
    Upgrade to Pro Series Commercial Dual Gauge Co2 Regulator [more info] +$9.00
    Remove CO2 Regulator from Order (No Thanks Already Have One) -$10.00

    5 lb. Co2 Tank (Included - Comes Empty) [more info] +$0.00
    Upgrade to 10 lb. Co2 Tank (May have to Place Outside Unit) [more info] +$17.95
    Remove Co2 Tank from Order (No Thanks Already Have One) -$35.00

    OPTIONAL 2ND KEG COUPLER (If you Plan on Tapping Import or Home Brew Kegs)
    Select D System Keg Tap - Black Lever Handle - KT85D-L [more info] +$25.95
    Select S System Keg Tap Coupler - Black Lever Handle - KT86S-L [more info] +$31.99
    Select Ball Lock Home Brew Keg Tap Complete Set [more info] +$14.99
    Select Pin Lock Home Brew Keg Tap Complete Set [more info] +$13.95
    Select U System Keg Tap Coupler - Lever Handle - CH5300U [more info] +$63.95
    Select Perlick Lo-Boy Low Profile D System Keg Tap Coupler w/ Pressure Relief - 40030 [more info] +$51.95

    OPTIONAL CLEANING KIT (Important To Clean Lines after each Keg)
    Optional CLEANING KIT! Add Economy Beer Line Cleaning Kit [more info] +$21.95
    Add Beer Cleaning Kit - 1 Qt. Bottle w/ 33 oz. Cleaner [more info] +$54.99
    Kegco Deluxe Hand Pump Pressurized Keg Beer Kegerator Cleaning Kit w/ 32 oz. Cleaner [more info] +$49.99
    Draftec Deluxe Hand Pump Pressurized Keg Beer Kegerator Cleaning Kit w/ 32 oz. Cleaner [more info] +$51.99
    Add Complete D System Pressurized Cleaning Kit [more info] +$102.95

    OPTIONAL TAP HANDLE (Plastic Faucet Knob is Included with Kegerator)
    Chalkboard Beer Tap Handle [more info] +$38.95
    White Board Dry Erase Beer Tap Handle [more info] +$39.95
    T180-7 - Twist - 7" BOD (Branding On Demand) Tap Handle [more info] +$42.95
    C100-4-M - 4" BOD (Branding On Demand) Tap Handle, Metal [more info] +$21.99
    P180-7 - Pebble - 7" BOD (Branding On Demand) Tap Handle [more info] +$43.95
    C100-4 - 4" BOD (Branding On Demand) Tap Handle [more info] +$18.50
    C150-6 - 6" BOD (Branding On Demand) Tap Handle [more info] +$15.95

    Add Optional FAUCET LOCK Add Slide-on Faucet Lock [more info] +$41.99
    Add Wrap Around Faucet Lock [more info] +$53.99

    Brand New - Kegco 3 Gallon Strap Handle Keg [more info] +$89.99
    Brand New - Kecgo 5 Gallon Strap Handle Keg [more info] +$94.99
    Brand New - Kegco 5 Gallon Rubber Top Keg [more info] +$101.99
    5 Gallon Ball Lock Keg - Reconditioned Beer Keg [more info] +$69.99

    Add Kegco Apparel
    Kegco Flexfit Mid Pro Baseball Cap  [more info]
    Kegco Trucker Snap Back Hat  [more info]
    Kegco Short Sleeve T-Shirt - Black  [more info]
    Kegco Short Sleeve T-Shirt - White  [more info]
    Kegco Long Sleeve T-Shirt - Black  [more info]
    Kegco Long Sleeve T-Shirt - White  [more info]

    Optional Extended Warranty
    New Leaf ServicePro 1 Year Extended Warranty [more info] +$24.99
    New Leaf ServicePro 3 Year Date of Purchase Warranty [more info] +$49.99
    New Leaf ServicePRO 5 Year Date of Purchase Warranty [more info] +$99.99
    New Leaf ServicePRO 3 Year Date of Purchase Commercial Warranty [more info] +$145.98
    New Leaf ServicePRO 5 Year Date of Purchase Commercial Warranty [more info] +$281.98

    Top Sellers

    Kegco K309B-1 Keg Fridge

    UBC KegMaster Commercial Kegerator

    Danby DBF163BL-1 Full-Size Kegerator - Black Cabinet with Black Door

    Kegco K209B-1 Beer Fridge