Kegco K309B-2 Dual Faucet Digital Kegerator - Black Matte Cabinet and Door

Click here to return to the Kegco K309B-2 Dual Faucet Digital Kegerator - Black Matte Cabinet and Door

Kegco K309B-2 Dual Faucet Digital Kegerator - Black Matte Cabinet and Door

Kegco K309B-2 Dual Faucet Digital Kegerator - Black Matte Cabinet and Door

These matte black Kegco K309B-2 Two-Faucet Digital Kegerators are beautiful freestanding keg dispensers that include all of the great features you enjoy from other high-quality Kegco models, now with digital temperature controls! These great features include attractive styling, a removable and easy-to-clean built-in drip tray, a chrome guard rail to prevent your mugs and glasses from sliding off the top, locking easy-roll casters, and a complete direct draw system for dispensing up to two kegs at a time. Thanks to the digital temperature controls, you now have the ability to see your specific temperature setting and set it easily with the push of a button, in addition to having a wider available temperature range for more precise temperature control. Digital Temperature Control: With a digital temperature display and push button controls, it has never been easier to set and verify the internal temperature of your keg refrigerator! Simply press the up or down button, and the temperature will be adjusted by one degree, avoiding the guesswork that sometimes comes with manual dial temperature controls. The temperature can be displayed in either Fahrenheit or Celsius. Fan-Forced Cooling for Super Cool Temperatures: Thanks to it's Fan-Forced cooling, this Kegco K309SS-2 Beer Keg Cooler has one of the coldest temperature ranges of any beer cooler on the market today. The fan helps provide even cooling throughout the unit, allowing the temperature to be set as low as 32 degrees to dispense ice cold draft beer. Large Interior: This keg beer refrigerator's interior is spacious enough to easily hold any full-size keg, including Coors kegs, Miller kegs, and rubber kegs. It can also hold up to two 5 Gallon D System kegs or up to three 5 Gallon Cornelius Ball Lock Home-Brew kegs, allowing you to dispense more than one type of beer at a time. Deep Chill Function: At the push of a button, a Deep Chill function gives you the ability to quickly cool down a warm keg by forcing the compressor to work continuously for 24 hours. When your keg has reached the desired temperature, pressing Deep Chill again will return your unit to normal operation. Converts to a Refrigerator with 2 Shelves: We could all use a little more room in our refrigerators, and when you're not using this unit as a beer dispenser, it can easily be converted into an all-refrigerator to give you that extra storage. Two adjustable shelves are included that can be spaced far enough apart to hold 2-liter bottles or gallon jugs. With the wide temperature range available in the K309SS-2, you can even use it to store and dispense kombucha, soda or wine! Easy-Roll Casters: When it's time for that backyard BBQ, you can easily move the Kegco K309SS-2 from the kitchen to the patio to join the party! Easy-Roll Casters make it easy to move this draft beer dispenser from one location to another, and they lock so that once it's in position, it won't roll again until you want it to. These keg beer dispensers provide you with all of the equipment you'll need to pour a cold, refreshing glass of beer straight from the keg. When you buy from the Beverage Factory you have the option to choose your keg couplers, allowing you to receive a custom setup for the type of kegs you prefer! Included in the draft beer system are the CO2 Tank, Regulator, Keg Couplers, air and beer lines, and all the fittings required to assemble the kit. Take a look at the available options below for a truly custom setup.
Product Reviews

Product Reviews

Kegco K309B-2 Dual Faucet Digital Kegerator - Black Matte Cabinet and Door Reviews

Average Customer Rating:
(based on 63 reviews) 
very nice product.
by:joe (03-25-2015)
elkhart, IN
Comments:got the cooler and was very easy to set up. it is nice looking and really keeps the beer cold. there is absolutely no noise coming from it. very, very quiet. I would highly recommend this item.
Bottom Line:I would recommend this product.
This is a great Kegerator!
by:Steve (02-09-2015)
Bigfork, MT
Comments:This Kegco Kegerator and Beverage Factory are great! Everything came exactly as they said it would without any damage. The digital temperature controls are excellent. We bought the Perlick upgrade and it also works great! We are set now, drinking craft beer from our local brewery. The price is right and we do not have bunches of empty bottles to deal with anymore. Thank you!
Bottom Line:I would recommend this product.
Better than the cheapies
by:Snydes (10-17-2014)
Eastern Washington State
Comments:Spend the extra bucks and get this one! The lines are first qulaity and the hardware is first rate. I had a couple issues with the plastic clamps supplied so you might want metal line clamps to be sure. Works well and does fit three cornelius kegs, barely! I am retro fitting mine with the Perlick faucets that have a "creamer" function. Don't bother with the dual gauge manifold as CO2 is in a liquid state and you won't know when you are getting low on gas until just before it happens.Nice metal floor and the digital controls work fine. Get one!
Bottom Line:I would recommend this product.
Would not hesitate to buy again.
by:Michael (10-13-2014)
Amarillo, Tx
Comments:Use double 1/6 keg configuration. Keeps beer at correct temperature of 35F. Easy to use and set up. only complaint is stock tap handles. They tend to stick if not used for two days. Would upgrade these.
Bottom Line:I would recommend this product.
Works great
by:Jeff (10-11-2014)
Brogue PA
Comments:Delivery was fast and the unit was easy to set up. Cold beer now on tap!
Bottom Line:I would recommend this product.
by:Disappointed (10-08-2014)
South Carolina
Comments:Just received my new K309SS-2 - I upgraded to the 10lb CO2 Tank. I also upgraded to the Double Guage Regulator.

I purchased this unit with the intention of offering two different types of adult beverages - therefore I wanted independently controlled lines to each keg.

Well, the 10lb CO2 doesn't fit inside, AND it doesn't fit in the bracket that came with it (to install on the back of the unit).

Secondly, in order to use the Double Guage Regulator, the regulator MUST be installed INSIDE the unit. It cannot be installed outside the unit (with the 10lb CO2 tank) because the hole that enters the inside cannot accommodate two CO2 lines!

Bottom line, if you want a 10lb CO2 tank, you can ONLY use one CO2 line to go into the unit(from the outside)!

Very disappointed that the website doesn't clarify those facts during the purchase.

**Support update - they have offered two 5lb tanks instead; very aggressive with a resolution, and I appreciate it!**

***I am in contact with Support***
Bottom Line:I would recommend this product.
Great Product So Far
by:Matt (09-23-2014)
Lacey, WA
Comments:I decided to buy this kegerator after doing a lot of research on the internet and settled on this one because of the positive reviews it received. The kegerator arrived in about a week and was very easy to put together. I did not have any experience with kegerators before but the instructions, along with research on the internet, made it very easy to assemble from the first screw to tapping/pressurizing the keg. I have had the kegerator for two weeks now and have no complaints. Stays very cold, no foam issues and very quiet. Exellent product so far.
Bottom Line:I would recommend this product.
Awesome kegerator
by:Mleban (09-22-2014)
Marietta, GA
Comments:First - shipping was excellent. Don't underestimate this. I sent back two slightly cheaper kegerators from another company that ships F*dEx. Both got damaged. This one shipped on a pallet and was delivered to my garage door by a local shipping company. Easily worth the cost of shipping.

Second - the unit is quiet, cold and well built. Did I mention quiet? Here's where the few additional bucks really shows. The original, cheaper, kegerator was so noisy that the Mfg. sells an insulation plate that you must buy and install behind the refrigeration plate in the back of the unit. Really?

Third - The built-in fan in the back of the unit distributes are throughout. Plenty of space, even with multiple beer & CO2 lines.

This unit is a winner, especially with the ability to customize so many options.
Bottom Line:I would recommend this product.
Like a good neighbor, Kegerator is there
by:GMan (09-16-2014)
Norman, OK
Comments:I have the 3 tap version and I keep 2 homebrew ball locks & one commercial sixtel on tap. Easy to assemble. Keeps a great steady temp that is exactly the temperature it says it is (I've measured). Fits the 3 kegs and 5 lbs CO2 easily, plenty of room. Love this thing, if you are on the it. You will not regret this. heavy duty wheels on it to move it if you need. the only thing I would upgrade if I could would be a metal drip tray. Get the Perlick taps as well, you won't be sorry. They eliminate stuck taps by being self sealing.
Bottom Line:I would recommend this product.
Great product
by:McMuffin (09-10-2014)
Boca Raton, FL
Comments:The product shipped very quickly and was delivered on time to my house. The packaging was neat and no damage to kegerator. It was very easy to put together and I figured most of it out without having to look at the directions, very self explanatory! The only thing I didnt know ahead of time was that the CO2 tank would not be filled (which I probably should have figured out or looked into before hand)but besides that I have no complaints at all!
Bottom Line:I would recommend this product.
works great!
by:Andy (09-10-2014)
San Marcos, TX
Comments:The product arrived as scheduled and the delivery driver helped me get it into the house. Unpackaging and assembly only took about 30 minutes which really wasn't bad at all. Once assembled I set the temperature to 36 and went to bed. The next day I picked up the kegs I had on order and filled the CO2 tank at our local welding shop and had my first cold tapped keg beer that evening. I currently have two 1/6 barrel kegs tapped with room to spare in the fridge. The CO2 tank is also on the inside. You should have no concern about fitting two kegs of this size in the K309SS. Overall I am very satisfied.
Bottom Line:I would recommend this product.
by:Rob (09-10-2014)
New Haven, CT
Comments:So far it looks great. Customer Service was very nice and helpful. Everything was shipped and delivery company worked with me to make it easy to deliver with my schedule.
Bottom Line:I would recommend this product.
LOVE this kegerator!
by:Sarah (09-03-2014)
Lubbock, Tx
Comments:I absolutely LOVE this kegerator. Setup was easy and all the parts were easily identified even to a novice. The refrigerator itself is nice and reliably cold! We keep ours at 34 and it keeps the glasses we store inside nice and frosty for our delicious Shiner Bach. Yum! The digital thermostat feature is very nice, to. Super easy to adjust. It's pretty quiet, quieter than our little mini-fridge and much colder! I wish we had upgraded our regulator because this one is a bit finiky- we haven't figured out how to keep the CO2 level constant with it. Maybe it's our inexperience, but I'm starting to think we might replace this commercial regulator with a different one. We ordered a Shiner Bach tap handle from ebay and it fit right onto the tap in place of the stock handle and looks super cool!

As long as reliability doesn't become an issue (we've only had it a week), then it was a GREAT investment!
Bottom Line:I would recommend this product.
Great kegerator
by:Frank (09-02-2014)
San Antonio, TX
Comments:I have just had this kegerator in operation for one week at this time but has performed perfectly. I ordered optional tower, faucets, regulator, and homebrew keg connections. Order was done correctly and all there. Set up was easy. Unit cools and pours well.
Bottom Line:I would recommend this product.
Excellent Product
by:Tyler (08-30-2014)
Albuquerque, NM
Comments:Product shipped quickly. Shipping service was flexible in regards to deliver time and very professional. Product carefully packed. No damage. Easy to assemble although directions not all inclusive. Small parts not discussed in directions. Kegerator rapidly cools to very cold temperatures. Looking forward to tapping my first beer!
Bottom Line:I would recommend this product.
Great Product, great service
by:Nathan (08-25-2014)
Chicago, IL
Comments:Just got my Kegco 309SS set up this weekend for a housewarming party. The cabinet looks great, I upgraded to SS Perlick taps and dual gauge regulator, glad I did both.

BF has fantastic customer service. I think I called them about 6 times while setting it up just to make sure I was doing it all right. Some tips for you.

Casters- Might be obvious to some but I didn't want to screw anything up. The front casters pop through a little paper covering over the hole. The rear ones you can see the machined hole in the back.

CO2- Just a reminder, THIS COMES EMPTY. You will need to fill it before you can use it so plan accordingly if you're having a party the day after it arrives! It's not the easiest thing to get on short notice and many places only swap out tanks rather than refill so you probably don't want to give up a brand new tank for a used one. Got my tank filled at a fountain beverage service company for $18.

Regulator - It says hand tighten and 1/8th turn with a wrench but that wasn't creating a seal for me so I called up customer service thinking there was a leak and they told me to tighten it way up so that did the trick. (they were ready to ship me another one on the spot if that didn't work though)

Unexpected Noise Troubleshoot - I waited the 8 hours to let the refrigerant settle as recommended in the manual before turning it on and when I did there was a noise coming from inside that definitely didn't sound good. At first I thought it was the compressor starting to circulate the refrigerant but it didn't stop after about 15 min so I figured that something was up. It ended up being the interior circulation fan. There are two screws that keep it attached to the back of the unit and its really just a computer tower fan circulating the air. The cord was being pressed into the fan causing the noise so I just tucked it into the open areas of the housing and screwed it back on and it is quiet as a mouse now. My cat's water fountain is a lot louder than the Kegerator. So if you hear a noise like something is wrong don't panic, check the fan first.

One of my couplers came with a cracked handle and they're shipping a replacement already so that was also good. I just sent them a picture of the damage and it's on its way

My only small complaint is that when I submitted my order I wasn't notified that the Kegerator was backordered for about a week and a half so that almost threw off my plans. They sent me a notice that the order was received and shipment was pending but I ended up needing to call because I forgot to upgrade my regulator when I submitted the order and that is how I found out. Order to shipment was 16 days.

The shipping company worked out great and actually could have delivered a day sooner than BF had estimated so that was good as well but I had already arranged to be home on the day they told me it would come.

Very happy customer overall. I've already recommended the Kegerator and Beverage Factory to several friends.
Bottom Line:I would recommend this product.
Don't get the standard faucets
by:Sdring (08-25-2014)
Comments:If you choose this unit do not get the standard faucets. Both leaked out most of the 1st kegs on the floor when we weren't around. If you don't use the faucet for a day you must shoot water back through them to get them unstuck. I am running an Amber beer and a wheat beer and both stuck. Service dept. is recommending stainless faucets so I have order them.
Unit is great but shouldn't even offer it with standard faucet.
Bottom Line:I would not recommend this product.
by:DON (08-06-2014)
Bottom Line:I would recommend this product.
Cold as a mofo
by:Pablo Diablo (07-23-2014)
Houston, TX
Comments:This thing cranks out the cold. I put a glass of water in there to measure with my thermometer and it froze over while set at 34F. Looks good, cold beer, and good equipment. Negatives: colder than temperature setting (much better than the alternative) and the dual gauge regulator is backwards so the mount is a little awkward (big whoop) - that's all I have to gripe about. I nutted up and got this one vs the more inexpensive ones because of some reviews that others don't get cold enough and I'm very glad I did.
Bottom Line:I would recommend this product.
Glad I bought it.
by:Lawman154 (07-17-2014)
York springs Pa
Comments:I use it for Rubber coated kegs and it has plenty of room. Cools great and looks good too. I searched around and this one had good reviews and great features. I like the feature that you can add or subtract items to fir your needs. Fast shipping and the delivery driver was great. So far it is a good investment.
Bottom Line:I would recommend this product.
Great fridge with poor accessories
by:Colin (07-17-2014)
boulder, co
Comments:The fridge itself is fantastic and I'm very happy with it. The tower and basic faucets are mediocre but work fine. The regulator is terrible and you will want to replace it.
Bottom Line:I would recommend this product.
Well made
by:Lawman154 (07-11-2014)
York Springs, Pa
Comments:I bought this because of the reviews and so far am not sorry. It is well made and looks good. Shipping company was great and the put it right in the garage so I could assemble it. Assembly was easy. The reviews on other units had the same complaint, not cooling. You don't have to worry with this one. It cools to 32 degrees and the deep chill setting is handy. I also put a tower cooler in mine and am not sorry. So far I would have to say you won't regret buying this one. The ability to add and delete features is a big plus.
Bottom Line:I would recommend this product.
Very nice
by:Paul (07-10-2014)
Leesburg, VA
Comments:I got approval from my wife and ordered this as a Father’s Day present. I decided to go with some upgrades such as Perlick stainless steel tower and premium regulator. I already had 5 lb. and 20 lb. CO2 tanks so decided to upgrade the order to the 10 lb. size instead. I ordered on June 5 and live in northern VA. While my order was in transit, I spoke with technical support in regards to drilling a hole in this kegerator to pass an air hose for an external air tank and an AC power wire to a tower fan cooler. I also wanted to know if this would hold a 1/6 barrel and 1/4 slim barrel. He was very helpful in answering several other questions and was pretty confident that it would hold 1/6 + 1/4 slim. He mentioned that drilling a hole in the unit would void the warranty and suggested I break it in first before drilling. They did not having the wiring or coolant schematics as to where it would be best to drill through the unit.

Shipping company is not the best. Had to call a third party and get passed around for order tracking. I learned that the order arrived to the DC metro shipping company warehouse on Wednesday June 11 which is 45 miles from my home. They informed me that they could not deliver until June 17. It sat in their warehouse for 5 business days and I did not receive until after Father’s day. Called Kegworks and got the standard line about 5-10 days of processing time… Allow a few weeks from order date to home delivery to be safe. Not really Kegworks fault but I did pass on my feedback.

Knowledgeable and friendly technical support
Got an additional $50 off for Father’s Day
Stays very cool. I bought a tower cooling fan on eBay. It keeps the tower chilled which reduces foam on the initial pour. Running the AC out the front door, corner and it seals fine for now.
Was able to fit 1/4 slim + 1/6 barrels. Easily fits two 1/6 barrels.

I have a ball lock 5 gallon keg on backorder since June 11. I plan to use it for soda and home brew. I also purchased a 1/4 MFL quick disconnect to swap between corny kegs and sankey kegs. Tried the 1/4 MFL on a 1/6 barrel and it’s a very tight squeeze at the top of this kegerator, puts a slight kink in the beer line. I’m ordering a bent tail piece which should fix that problem.

Still contemplating where to drill a hole in this unit to run an external 20 lb nitrous/CO2 mix and the 10 lb tanks along with the tower cooler power wire. I don’t want to hit refrigerant or power lines inside the walls or this unit will be toast. Appears the sides have refrigerant lines in the walls, you can feel the heat in certain areas on the outside. There is a drain on the back above the compressor. Might try drilling a small pilot hole near that area and see if there are any obstructions.

In all, I’m very happy with my purchase. The digital display and controls are very nice. You can easily turn this into a wine cooler when not serving beer.

Bottom Line:I would recommend this product.
Love this Kegerator
by:Frank (06-28-2014)
Telford PA
Comments: I am thrilled with it! Easy to set up and pouring cold beer wow love it. This was a big purchase for me.
Bottom Line:I would recommend this product.
A step above other kegerators
by:Snydes1 (06-24-2014)
Eastern Washington
Comments:After a very helpful conversation with the staff, I chose this model, which happened to be on sale. Glad I did, as a buddy saved some money on a cheaper brand and there is no comparison--he really regrets his choice as his just doesn't have all the nice touches and quality this one does and the tech support in setting it up was very helpful for a few quick questions. I love it
Bottom Line:I would recommend this product.
the ultimate keggerato
by:runnindude (06-17-2014)
Oly, WA
Comments:This is an excellent product. If you are a home brewer, this is the one for you. It allows for variety both for your brews and if you choose to get a 1/6th keg. there is a 10$ difference for the digital thermometer keg. Just do yourself a favor and get it. it is worth it and if you are already spending this much money....10 bucks is nothing. It is a tight fit. they give you the c02 splitter, but it is not mounted. I mounted it by getting adhesive velcro from home depot and mounting it to the top side of the fridge. i can move it if i want and it is very secure. having it on locking casters is fantastic too. Everything about it is high quality and i have it out in my garage for now (need a spot inside for it.) perlik faucet upgrades are a good idea if you are going for it. unless you only get a 1/2 barrel keg and drink a lot there is no reason to stop at a one or two faucet kegerator when you can have three options. The great part about this fridge is that it is not so big that it dominates space. I could go on, but by now you have stopped reading this and are already ordering it. cheers!
Bottom Line:I would recommend this product.
Big and COLD
by:Scott (06-09-2014)
Comments:So I have to say that i did A LOT of research prior to making this purchase. I have found it hard to find many other reviews on this unit except for the ones here on bevfactory. However the unit is everything I expected. Fast delivery,easy set-up and best of all.... COLD BEER! I have the unit in a garage where the tempature can go up to 85 degrees and the Kegco works flawlessly. There is a little extra foam on the first pour (as expected without a fan cooled tower) but with the internal cooling fan, this is very minimal compaired to other kegerators that I have used in the past. The interior is big enough to hold a sixtel and 2 cornies with a 5lb co2 tank. All of the parts are of commercial quality (i up graded the regulator) and seem like they will last for a long time. Thanks Beverage Factory for my new best friend!
Bottom Line:I would recommend this product.
Love this kegerator
by:Monkeybox (06-05-2014)
Grand Rapids, MI
Comments:Ordered mine with the Perlick faucets, outfitted for 2 homebrew cornie kegs and a commercial sixth barrel. It works great.

Only improvement I'd make is that I wish it came with longer beer line so that I could run it at a higher pressure, but I'm doing just fine at 40degrees and about 10psi.

Had a problem with the initial CO2 regulator, but beverage factory made it quick and easy to get a replacement.
Bottom Line:I would recommend this product.
Very satisfied
by:Kelsy (06-03-2014)
University Place, WA
Comments:Easy order, delivery.
Arrived in perfect condition. Easy to assemble. Works great. Cools the beer quickly. Does not make any strange popping or cracking sounds like others that I researched before purchase. This was an early Father's Day gift. As homebrewer, husband is thrilled with it and it so much more convenient that using bottles.
Bottom Line:I would recommend this product.
This is the great kegerator!!!
by:Mac (05-17-2014)
Comments:This was easy to set up, and after a resetting the temp a couple of times it pours great. Make sure you set up a thermometer in the kegerator as I ffound a slight difference between the digital setting and the reality in the kegerator. It is quiet, I have to listen for it to make sure it is working. The recessed drip tray looks sleek compared to the drip trays that just sit on deck. Well thought out and well built. You can get cheaper ones, but you get what you pay for.
Bottom Line:I would recommend this product.
Fantastic unit so far!
by:Eric (05-04-2014)
Phoenix, AZ
Comments:I did a bunch of research before buying. The Haiers and the Danbys of the kegerator world seem to be very cheap. Not affordable, mind you, cheap. As in, not well made. A few people have recommended the Kegco units, and the reviews have all been positive. Well, so far the reviews have been spot on. I ended up purchasing a "scratch and dent" unit. The only issue is a small dent on a side wall, at the very bottom. I'll gladly take that for the $150 off regular price. Other than that dent, it's in prestine shape.

Anyway, the unit arrived a few days early, which was great. it was VERY well packaged. The packaging was in perfect shape as well. They were cautious with packing and shipping, clearly. It took maybe 45 minutes to unpack everything and assemble the few things that needed assembly (faucet tower, casters). The unit is super quiet. Can barely hear it run. I have mine set at 33 degrees, and canned soda has small ice crystals all through it when I pop the tab. perfect. It would probably freeze if I dropped it to 32. The temp adjustment covers the 32-75 degree range. I plan on testing this out at some point, using the fridge as a fermentation chamber to maintain temps when I brew my own.

Overall ,this thing rocks so far. If reliability does not become an issue, it was money very well spent!!
Bottom Line:I would recommend this product.
Love it - great for home brewer
by:Bryan (04-01-2014)
Westfield (Indy), IN
Comments:I've been a home brewer for a few years and was getting tired of bottling so I finally got into kegging with this unit. I was very impressed with the quality of the unit and the lines beverage factory provided for all the gas and liquid hook ups. I currently only have one keg full but hooked up all 3 kegs to run hot water with PBW through the lines to clean them and then ran sanitizer through all 3 kegs and lines also to prep for eventual home brew flowing through.

The unit is very quiet. We have it next to our bar in the basement and its just a few feet behind our couch and you can barely hear it when the compressor kicks on.

I upgraded to the Polished Stainless Steel Tower with Perlick 630SS Faucets and it is pretty good quality and came with insulation in the tower. I haven't had any issues with foaming or warm beer in the line even when not being used for a couple days.

The only con is that the triple faucets are very close together and it doesn't leave you many options to upgrade the tap handles. I initially ordered the T180-7 - Twist - 7" BOD (Branding On Demand) Tap Handle but had to return them because the handles hit each other at the top. You're limited to probably a 4 or 5 inch pretty straight tap handle. I'm currently just using the cheap plastic ones that come standard. They are fine but I want something a little nicer.
Bottom Line:I would recommend this product.
Better Build Quality
by:Miles (03-31-2014)
Bozeman, Montana
Comments:I tried and returned a kegerator of lesser quality to a different store. I found the Kegco model and paid a little more. Boy, what a difference. This kegerator is much more solid and put together well. The fan sounds great in theory however I found it to be very noisy. Sounds like a weed whacker at times. It was much noisier in the first few days but once the fridge was cooled then the fan doesn't turn on nearly as often. I like the digital controls as I don't have to crawl behind the fridge when I want to adjust the temperature. I would give up the digital for a quieter traditional model however. The stainless steel tower and perlicker tap upgrade were well worth it.
Bottom Line:I would recommend this product.
Should've done this sooner
by:John (03-14-2014)
Quinton, VA
Comments:I had been using a 5 liter kegerator but was dis-satisfied with the poor selection of beers available, so I ordered the K309SS-1. My only regrets are that I should've done this years ago and that I only ordered the single tap (I upgraded to a double tap within a month). Aside from a little compressor noise this thing is perfect and I would recommend it to anyone.
Bottom Line:I would recommend this product.
you are done shopping
by:paul (03-10-2014)
Rochester, NY
Comments:I review products before I buy them. I understand that everyone does this. Nobody does the research that I do. I picked this unit instead of a TRUE Kegerator based on this unit is half price of the commercial units. Beer is ice cold, the unit is quiet, and the components are all high quality. Setup is a breeze and the Beverage Factory is the place to buy. Can't find it cheaper. Very happy with everything.
Bottom Line:I would recommend this product.
by:Home brewer John C (03-07-2014)
Long Island, New York
Comments:I have 3 of my own brews on tap at any time!! The digital thermostat is right on, I keep it set at 38deg. The fan helps cool everything faster and keeps a steady temp. It is a quiet unit and the stainless matches the other appliances in the kitchen. (Keeps the wife happy). I just wish the co2 tank was on the right side instead of on the left in front of the fan. Or better yet was able to be mounted in the back outside of the unit.
Bottom Line:I would recommend this product.
great product
by:don (02-25-2014)
Comments:Hopefully I wont jinx myself, but so far this keg cooler is great. I have had a keg cooler in the past and although it worked, it always gave me problems. This cooler worked great from the beginning. Keeps the beer very cold, and no foaming. The one thing that would have been better is if the bottom where the keg sits, if it would slide out for easier install. Great unit. Great delivery time also.
Bottom Line:I would recommend this product.
Happy Customer - Mostly.
by:NMZark (02-25-2014)
Mechanicsburg, PA
Comments:Good price even with shipping. Very well packaged. Fast shipping. Looks like a high quality unit. Was short one hose clamp that I fixed with a trip to Pep Boys. Was surprised to learn that the faucet locks purchased with the unit do not fit the faucets purchased with the unit! I would have thought their sales folks would have either caught the issue or not included the locks and faucet options on the same unit. Weird... Tried contacting the sales person via email regarding the issue, but I have not heard back.
Bottom Line:I would recommend this product.
Excellent ...Recommend
by:Ryan (02-25-2014)
Comments:JUST LOVE IT!!! Decided to get the dual tap, thinking better to have two and not need it then have only one and want more. However, right now just running one keg. My intent was to run a 1/4 slim and a 1/6, but no one in my area supplies 1/4 slims, just pony. Not like that keeps me from enjoying a frosty cold beer right from this tap.

I installed this under my homemade bar, using 2" pvc to connect from cooler to tower...comes out at a nice 32 degrees with cooler set on 33 (no tower fan needed). Love it!! Put it in just in time for superbowl and everyone loved it. Would have liked an external mount option for the CO2 tank with punch out in back to adjust and refill tank easier.

I think for the price this was just outstanding, shipping was super fast and customer service excellent when i had questions or needed something. The regulator was missing from shipment, however was sent express in 2 days to have it up and running for Super Bowl.

I would recommend this company again. I suggest getting dual gauge regulator and magnet strip to monitor beer left in keg. Ran out two days before game day and had no idea it went that fast.

Thanks again BeverageFactory!!
Bottom Line:I would recommend this product.
Kegco K309B-2
by:Tim (02-13-2014)
Milwaukee WI
Comments:Works as advertised. Excellent shipping from seller.
Only problem, can't find one of the bolt holes for the caster wheels. Appears to be covered up by the lower door hinge.
Have been waiting several days to hear back from customer service.
Bottom Line:I would recommend this product.
by:phife4life (02-13-2014)
Comments:Great kegerator keeps beer ice cold. My only problem now is that im drinking too much beer lol.
Bottom Line:I would recommend this product.
Awesome Kegeator
by:TommyBoy (02-06-2014)
Buffalo NY
Comments:Pros; I originally converted my garage fridge into cooler for keg to see if I liked having that, Well I did and after much research decided on this Kegerator and am very happy
Cons; doesn't keep 100% accurate temperature but it didnt cost me thousands of dollare either!!
Bottom Line:I would recommend this product.
Good purchase...
by:DB (02-05-2014)
Aurora, CO
Comments:Everything was included in the shipment but, I did have one issue. The plastic adhesive on the front panel has a spot where it is pealed up a little bit. I figured wasn't to big of an issue considering u can hardly see. Over all though I'm hella pleased.
Bottom Line:I would recommend this product.
Great Customer Service
by:Chad (01-30-2014)
Greenville, SC
Comments:I bought this for use with my home brew. I called Beverage Factory with my questions and they were great help and easy to work with. I upgraded to the stainless tower and higher quality regulator. Both were well worth it.

Shipping was quicker than expected for living across the country.

I only had one issue with a loose nut on the tower, called Beverage Factory and they immediately sent me the tool to tighten it up.

I am a big fan of the digital temp control and can't wait to taste my home brew on draft!
Bottom Line:I would recommend this product.
So far it's been great!
by:RossC (01-27-2014)
New Jersey
Comments:It's been great so far! Easy to get setup and working flawlessly. I would say my only complaint is the drip tray feels cheap and wish I could swap it out for a stainless steel version.
Bottom Line:I would recommend this product.
Not disappointed
by:Daniel (01-24-2014)
Comments:Everything was as I expected. The whole unit is very attractive. If you're starting from scratch remember to order a regulator. I somehow didn't see that as an option. At first It seemed a bit loud, but after it ran for a day, the compressor quieted down and I'm was happy with the it.
Bottom Line:I would recommend this product.
I liked it so much, I got two...
by:Jarek (01-21-2014)
Bellingham, WA
Comments:Yes, I bought 2 of them and they're awesome!

Everything came as expected and except for the unorthodox tower screws, everything looks and pours like a charm. The screws for the tower were not tapered so I had to find a specialty screw shop to get the 16mm M5 Stainless Steel Machine Screws to replace them (a minor detail but they now look flush with the chrome base).

I also upgraded to the Premium Pro Series Commercial Grade Dual Co2 Gauge and got the T180-7 - Twist - 7" BOD (Branding On Demand) Tap Handle (a necessity if you’re going to do U-Brew with multiple kegs at one time). It took me a while to set up a template to fit the margins in the tear-drop like Tap Handle window but now I can quickly customize/print a new label when I change the keg.

All in all, the Kegerators work great and look great. I affectionately call them the ‘twins’… :). They sit in our front living room and they look like they’re part of the furniture. Even my wife likes them.

Money well spent and I would definitely recommend them if you’re looking not just for functionality but also for an appliance to compliment your furniture.

Cheers… :)
Bottom Line:I would recommend this product.
by:Chris (01-10-2014)
Staten island , N.Y
Comments:I bought this kegerator as a xmas gift to myself and I cannot complain,My beer is always fresh n ice cold!
Bottom Line:I would recommend this product.
Sweet Kegerator DUDE!!!
by:Jason (12-31-2013)
Denver, CO
Comments:My wife wanted me to get a kegerator :) SO after much research I chose the kegco double tap. Since I mainly drink craft beer and my favorite liquor store can get me many types of 5Gal kegs, I went this route to have options on tap. Easy to set up, Bev factory was very helpful when I had a question and called their tech support. So far so good, still getting the thing dialed in with CO2 levels and such but, I think this is a great mid priced option with lots of features and solidly built.
Bottom Line:I would recommend this product.
It looks great and works great I love It
by:Gary (12-30-2013)
Covington, Georgia
Comments:I keep this Kegerator in my man cave, where we watch UFC fights and all other sports.I have used four pony kegs in it so far with no problems. All my friends think it is so cool.I keep my beer at 34 and it is cold and good. The super chiller is awesome and it really works.(I love that feature) This Kegerator will hold any size keg plenty of room,and well built inside.I upgraded to a polished stainless steel tower (beautiful)and a dual gauge C02k, witch tells me how much C02 is in my tank and pressure (I keep mine at 10 pounds) easy to use.I also got a Kegco pump cleaning kit to clean the lines. So easy to use,fantastic! A must to keep your beer fresh.(I clean mine after every two kegs)It comes with a 5 pound aluminum tank and it sure looks good. The only issue I have is its hard to find someone to fill the tank with C02. A welding Supply place will carry 5 pound C02 tanks full but will not fill yours and their tanks are ugly, and yours is beautiful. They want an exchange so I decided to keep mine and buy theirs. The C02 is cheap and lasts a long time, but buying the tank the first time is expensive, I hope to find someone who can fill my tank for a reserve. But If I was to do it again I would delete the tank. If your looking for a kegerator this is the one, you will not be disappointed.
Bottom Line:I would recommend this product.
Nice and COLD!
by:JudyBoo (12-24-2013)
Cocoa Beach, FL
Comments:Purchased this as a Xmas present for hubby. We set it up with ease, purchased a keg, hooked it up and after clearing the line a little, we had nice cold beer with very little waste. WE have owned kegerators in the past the provided more foam than beer. Additionally, there is a lot of room inside. I have 2 champagne bottles in there right now cooling for mimosas on Christmas morning
Bottom Line:I would recommend this product.
Beers Away
by:Randy (12-18-2013)
Tiki Island TX
Comments:Very compact. Gets cold quickly. Easy to assemble. Hardware is all heavy duty stainless. Very good quality. Whisper-quiet compressor
Bottom Line:I would recommend this product.
Awsomeness in a box
by:Carl W. (12-10-2013)
San Jose, CA
Comments:When I had decided to upgrade my kegerator I did a lot of research and price shopping on line. Your company had the best selection and price I could fine.

When I phoned your company I spoke with Erika D'Eugenio. From the moment we connected on the phone I knew I had selected the right company to fill my order.

Erika was knowledgeable helpful and informative. She kept me from making a purchasing mistake and steered me to the correct product.

Once the unit (K309B-2) arrived I set it up with ease. I would highly recommend your business to anyone who asks.

I would shop here again in a heart beat. Erika sold me, and I will be a customer of your products for decades to come.

Warm Regards,
Carl Welch
Bottom Line:I would recommend this product.
by:Jessica (12-04-2013)
Burlington NJ
Comments:I had no trouble assembling or using this kegerator. The directions were helpful. The hoses were awkward to attach, but the hot water- as advised- helped. We love it! Every feature is as promised, delivery was as promised. Great service, great product!
Bottom Line:I would recommend this product.
by:Jason (11-29-2013)
Comments:This baby is outstanding!!! I could tell as I took it out of the crate that it was built very well. It assembles in no time and everything works amazing. For anyone with foam problems, make sure your pressures and temperatures are in your carbonation range!
Bottom Line:I would recommend this product.
A very nice cooler-dispenser
by:ski (11-29-2013)
ocean shores, wa
Comments:a good looking the s/s front. Plenty of room inside tho my 10# co2 tank won't fit in the metal band (for a 5# tank. Really like the digital readout of the temp. needs to be careful of the small parts. I nearly threw away one of the spacer-cushions for the feet of the chrome guardrail. it was caught in the foam wrapping of the guardrail. Definitely recommend the perlick taps..real quality here. Overall...a very nice kegerator, one you'll be happy to have...especially when the wife gets her refrigerator back.
Bottom Line:I would recommend this product.
Great kegerator
by:Generik (11-15-2013)
Indianapolis, IN
Comments:I purchased this kegerator to replace a countertop height fridge that I had converted to a kegerator a few years back. After using the Kegco model now for a few weeks, the performance is well beyond what I had used in the past.

First thing to mention is the quick shipping. After placing the order I had the kegerator in 5 days. Installation was very easy and there are easy to understand directions on how to assemble the few things that need to be put together. Total assembly took less than an hour including the time to unbox everything.

I opted for the stainless steel tower to replace a chrome tower I already had and find the insulation is very good and helps minimize foaming on that first pour. The insulation is a foam rubber that wraps around the beer lines fairly tightly reducing the air space in the tower. I have consistently gotten excellent pours from this tower with the Perlick faucets I had already had.

The kegerator itself has nice touch controls right at the top of the front. First time plugging it in I noticed it cooled down to running temperature very quickly. Leaving it on overnight should be more than sufficient time to have it cold enough to handle your first keg. There is plenty of room inside and the shelf for the CO2 tank is nice for getting that out of the way.

All in all, I am very happy with this kegerator. It looks great and works extremely well. It definitely chills the kegs much better than my previous 'homemade' kegerator which results in very good pours with a proper head and not 3/4 glassfuls of foam. I'd recommend this to anyone looking for a great kegerator.
Bottom Line:I would recommend this product.
wow this is a dream come true!
by:leo mulholland (11-01-2013)
san ramon
Comments:Pros: everything!
Coins: nothing!

This product out of the box is amazing. Easy setup as well as great construction. The way it is designed the first poor is always cold due to the internal fan. With this product, you get what you pay for! Temp control is great and the chill function are flawless!
Bottom Line:I would recommend this product.
Fantastic Product! Amazing Company!
by:Dan (10-25-2013)
Portland, OR
Comments:The kegerator is by far better than any I have owned. It's a solid build and the components supplied by Beverage Factory are top of the line. For example, when I brought the CO2 tank in to be filled, they commented on how great of a tank it was and how others who had purchased kegerators from other retailers have brought in tanks made in China with leaks and expired tank inspection stamps. The unit was a breeze to assemble and could be done by nearly anyone.

I had a slight issue with my CO2 regulator and called about it. A new regulator was sent out immediately, no questions asked. AMAZING customer service!

Bottom Line:I would recommend this product.
Great Value! Highly Recommended
by:Amy & Clyde (09-29-2013)
Mt. Juliet, TN
Comments:- Used in home bar

- Unit: (Pros)
- Overall: This unit is a great value. It's intended as a refrigerator type system, and it delivers on its purpose. It looks great, well designed, great fit and finish and stays at a constant temperature.
- Components: The additional components are of great quality. The lines, tower, couplers, regulator and CO2 tank are all top notch. We like the CO2 tank so much that we requested it be filled instead of replaced at our local welding facility.
- Assembly: We had this unit up and running in about 30 minutes after we filled the CO2 tank and bought the beer. The instructions were very easy to follow.
- Controls: The digital controls on the front of the unit are easily managed and readable. We are very glad that we decided on this feature.
- Performance: This thing consistently pours flawlessly. Once we dialed in the correct pressure with the chosen upgraded regulator (very nice!), we have been very pleased with the pints that we pour.

- Unit: (Cons)
- Drip Tray: The accompanied drip tray is a two-piece plastic unit that functions fine. We would love to have the option for a metal drip tray to be as nice as the rest of the unit.
- CO2 Tank Holder: The clip for the CO2 tank is a "Horseshoe" shaped metal band with small holes on each flared end. This design would be fine if there was a provided way to hold the flared ends somewhat together. My wife and I are using a simple nylon cord with a locking slide. (Think camping chair bag closure)

- Beverage Factory: (Pros)
- Overall: This has been one of the best buying experiences that my wife and I have ever had online or over the phone. Our representative was very knowledgeable. The majorly impressive thing was that when she was stumped by one of our questions, she took the initiative and called us back with an answer that day! From start to finish, Beverage Factory listened to our wants and needs, educated us on the best products and components and has followed up after the sale to make sure everything went smoothly.
- Beverage Factory: (Cons)
- Overall: None to report - this was an awesome experience!!!!

- Recommendation: If you are looking for a double tap unit that works for your home bar, kitchen, man cave or game room, the Kegco K309B-2 ROCKS!!!!! We would recommend upgrading the regulator to the pro unit and the tower/faucets to stainless steel. You will be happy that you did. All-in-all, we are very pleased and will be doing more business with Beverage Factory in the near future.
Bottom Line:I would recommend this product.
by:Brad (09-27-2013)
Dayton, OH
Comments:This was a big purchase for me. Once I knew I was actually buying a fridge (as opposed to converting one) I decided to go ahead and get one that could fit multiple kegs with two faucets. Might as well right! Currently I have a slim quarter and a sixth installed with a little room to spare. I think I could fit 2 slim quarters as the inside of the door is recessed a little. From the outside it is about the size of a dishwasher.

It will take a few days to cool down completely, but then the ambient tempature inside will match the display. I keep it on 33°F with no problems. You can use deep chill for the first few hours when you first put a keg in. Also, you will be fiddling with the regulator some and opening the door alot makes it harder to get cool.

I installed this unit under my workbench in the garage and mounted the tower to my workbench surface. I used a 6" piece of 2" PVC as a spacer and used and upside down shower drain as a flange to attach to the fridge. Multiple lengths of screws are included. I also had just enough room to put foam insulation down inside the PVC around the beer lines. The tower includes nice rubber insulation as well.

Finally, I find it much easier to pour into a pitcher as opposed to straight into a pint glass. There will be a little foam as the beer in the lines in the tower will warm up just a little. It's not enough to tell a temperature difference, just enough to make some foam. I find it's best to "burp" the faucet twice (open/close quickly), then let it run into the pitcher. From there you can make a perfect pour into your frosty pint glass.

Here are my recommended upgrades:
Worm gear hose clamps on CO2 lines (auto parts store)
Dual gauge regulator with dual shutoff valves
Standard 'D' system sankey couplers
Stainless steel tower
Perlick 525SS faucets
Pressurized cleaning kit
Stainless steel drip tray
Bottom Line:I would recommend this product.
Love this Kegerator
by:C. Johnson (08-19-2013)
Valley, AZ
Comments:I recently purchased this kegerator, I am thrilled with it! Easy to set up and pouring cold beer. I like my beer REALLY cold, this unit has an additional fan and digital display for accurate temperature. I am glad I was able to purchase a great unit with out having to spend a ton of money. I upgraded the regulator to a double gauge, I am not that close to an air and gas place, I would hate to run out.
Bottom Line:I would recommend this product.
My friends are jealous!
by:Brewmaster in Training (05-07-2013)
Yardley, PA
Comments:I've been home brewing for a couple years and i got tired of bottling so I decided to give this kegerator a try. It is awesome! I set it up with a couple home brew kegs and now I can pour a glass at a time and it always comes out ice cold. I've found that I'm brewing more and experimenting with my recipes because I can have two kegs on tap and compare tastes right away. It's perfect for a home brewer like me.
Bottom Line:I would recommend this product.