CellarPro Wine Cellar Cooling Unit (1900 Cu.Ft. Capacity)

Designed for wine cellars up to 1900 cubic feet and rated for internal applications, the 6200VSi features variable-speed fans with a "high" setting for maximum performance in high-temperature (+110°F) environments and a "low" setting for super-quiet operation. Additional features include a thermostatic heating element and 1/2" I.D. drain line, electronic temperature and adjustable humidity control.

CellarPro's 6200VSi 1/2 Ton Nominal wine cellar refrigeration system combines outstanding performance, adjustable humidity control and variable-speed fans for super-quiet operation.

CellarPro's 6200VSi should be used for interior through-the-wall or ducted wine cellar installations. The cooling unit is designed to handle extreme environments ranging from 40°F to 110°F. For installations in environments down to 20°F, we recommend adding our compressor heater modification to the cooling unit. Below 20°F, the cooling unit's performance will begin to degrade.

The cooling unit can be located remotely and ducted with our front duct kit, rear duct kit, bottle probe and remote control accessories. With our duct kits, the supply and return airflows can be ducted up to 100 equivalent feet (50 feet per duct) without an inline fan, or 200 equivalent feet (100 feet per duct) with an inline fan.

• 1900 Cu. Ft. Capacity
• Designed to operate in extreme temperature conditions (+110°F)
• High-Performance Compressor
• Oversized Coated Evaporator Coils
• Dual High-Output Centrifugal Fans
• Adjustable Humidity Control via Electronic Display
• Thermostat-Modulated Condensate Evaporator with "On/Off" Control
• 1/2" ID Condensate Fitting and Drain Line
• Variable Speed Settings for Super-Quiet Operation or Maximum Performance
• 66 Decibels at Low Fan Speed
• Ductable Condenser Intake and Exhaust- 100 Equivalent Feet (50 per vent)
• Advanced Electronic Thermostat
• Digital LED Display
• Energy-Saver Mode
• Quick-Chill Mode
• Audible and Visual Alarms
• Min/Max Temperature
• Maintenance-Needed Indicator
• Power On/Off Switch
• Auto-Defrost Cycle
• Stainless Steel Drain Pan
• Removable Steel Case
• Replaceable Condenser Air Filter
• Rechargeable Refrigerant Schraeder Valve
• Adjustable Mounting Brackets
• Vibration-free Operation
• Dual Power Source - Front or Rear
• Compatible with a Dedicated 15-Amp Circuit
• Optional Bottle Probe
• ETL Tested and Certified (UL Standards)

Please Note:For installations in environments down to 20°F, we recommend adding our compressor heater modification to the cooling unit. Below 20°F, the cooling unit's performance will begin to degrade.