Contact Center

CellarPro 1800-QT Wine Cooling Unit

Designed and built by the same people who bring you Le Cache, the ultra-quiet, vibration-free CellarPro 1800-QT Wine Cooling Unit includes upgraded components and new features, resulting in an advanced cooling system that outperforms the competition in every category. Each CellarPro cooling unit comes with an electronic thermostat and digital LED display, allowing you to precisely set the desired temperature inside your cabinet. The cooling system also offers adjustable humidity control to easily maintain the optimal humidity, up to 70% RH, and automatic defrost to prevent ice build-up. In addition, the digital controls offer convenient energy-saver and quick-chill modes.

Photo of CellarPro 1800-QT Wine Cooling Unit

Interchangeable top vent/back vent exhaust makes it easy to redirect the hot air exhaust to suit different applications, while the removable steel case allows the cooling unit to be repaired in the field. Other features include a maintenance-needed indicator, audible and visual alarms, epoxy-coated coils and a rustproof condensate pan. The 1800-QT wine cooling unit is designed for cabinets that will be placed indoors and used in residential operations.

STANDARD FEATURES

Dimensions & Specifications
Height: 10 1/2"
Width: 18"
Depth: 16 1/2"
Weight: 55 lbs.
Rated Capacity: 1800 BTU
Electrical: 115 V AC/6 A
  • Powder-Coated Dark Grey Finish
  • Designed for Cabinets That Will Be Placed Indoors and Used in Residential Operations
  • Electronic Thermostat
  • 3-Digit Digital LED Display
  • Programmable Control
  • Adjustable Humidity Control
  • Energy-Saver Mode
  • Quick-Chill Mode
  • Audible and Visual Alarms
  • High-Output Compressor
  • Epoxy Coated Coils
  • Oversized Compressor and Coils
  • Precision Expansion Valve
  • Three System Probes
  • Min/Max Temperature
  • CellarPro Digital ControlsMaintenance-Needed Indicator
  • Auto-Defrost Cycle
  • Ultra-Quiet Operation (< 50 dBA)
  • Power On/Off Switch
  • Interchangeable Top Vent/Back Vent Exhaust
  • Rustproof Condensate Pan
  • Acoustic and Thermal Insulation
  • Removable Steel Case
  • Vibration-Free Operation
  • 8' 16-Gauge Grounded Power Cord Exits From the Rear
  • 3-Amp Light Receptacle, Grounded AC Outlet
  • ETL Certified (UL Standards)
  • Note: This cooling unit is designed to replace Breezaire 1060 and WineMate 1500 top and back vented cooling units. Before purchasing a CellarPro cooling unit, 1. check the power cord placement on your existing cooling unit, and 2. check that the outside dimensions match your existing cooling unit.

OPTIONS AND MODIFICATIONS

  • Auto-Dialer
    An added level of protection for expensive wine collections, an auto-dialer is recommended for wine collectors who travel frequently and/or for wine cellars that are located in warm. The auto-dialer will warn you remotely, calling up to 4 phone numbers that you program in advance, if the cooling unit has triggered an alarm and/or has lost powered. Additional features include programmable pauses and tone/pulse dialing. The auto-dialer is directly wired to the cooling unit with the wiring exiting from the rear of the cooling unit. The auto-dialer also has 9-volt standby battery backup in case of power outage.

  • CellarPro Wine Cooling System with Cord Out Side ModificationCord Out Side
    The 8-foot, 16-gauge grounded power cord can be routed to exit from the left side of the cooling unit, just below the power outlet. This modification is designed for cooling unit installations where the power outlet is located inside the cellar.

  • Condensate Fitting & Tube
    A condensate fitting is recommended when the cooling unit will be installed in a wine cellar. The fitting allows excess condensation to drain from the rear of the cooling unit through the vinyl tube. The included tubing measures 8' long with a 1/2" I.D.

  • Vent Exhaust Configuration
    CellarPro offers the choice of top or rear vent exhaust configuration for your wine cooling unit. The vent panel can also be swapped in the field for interchangeable top/rear vent exhaust.

If you are replacing a cooling unit in a wine cabinet other than a Le Cache, you may also need the following optional accessories:

  • Mounting Clips (Pair)
  • Fluorescent Light

WARRANTY INFORMATION

  • 5-Year Limited Warranty - Parts and Labor
CellarPro 1800-QT Wine Cooling Unit
Photo of CellarPro 1800-QT Wine Cooling Unit
(view larger)
CellarPro 1800-QT Wine Cooling Unit
Price:$850.00
Optional Auto-Dialer
No Auto-Dialer Added [$0.00]
Add Auto-Dialer [add $299.00]more infoItem Detail
Optional Cord Out Side Modification
No Cord Out Side Modification [$0.00]
Add Cord Out Side Modification [add $50.00]more infoItem Detail
Optional Mounting Clips
No Mounting Clips Added [$0.00]
Add Mounting Clips (Pair) [add $18.00]
Optional Fluorescent Light
No Fluorescent Light Added [$0.00]
Add Fluorescent Light [add $35.00]
Optional Condensate Fitting & Tube
No Condensate Fitting and Tube [$0.00]
Add Condensate Fitting and Tube [add $100.00]more infoItem Detail
Select Vent Exhaust Configuration
Factory Configured Top Vent [$0.00]
Factory Configured Rear Vent [$0.00]
based on 1 Reviews
 

Product Reviews

Product Reviews

Average Customer Rating:
(5)
(based on 1 reviews) 
finally, humidity control
by:Jim (08-01-2008)
New York
Pros:Attractive Design, Easy To Install, Energy Efficient, Precise Temperature, Quiet
Cons:
Best Uses:Converted Closet, Custom Wine Cellar, Kitchen
Describe Yourself:Aspiring Enthusiast, Connoisseur
Comments:this is a great a unit. easy to operate. I bought it because it will control the humidity and it does seem to live up to its promise.
Bottom Line:I would recommend this product.