Kegco Lever Handle D System Keg Tap with 1/4" MFL fittings

The KT85-MFL is the ideal coupler for anyone who wants to easily switch back and forth from domestic to home brew kegs. It features 1/4" MFL fittings for both the gas in and beer out, so you don't have to worry about pulling a hose off of a hose nipple or removing clamps if you want to use a different type of coupler. Simply unscrew the nut from the fitting and screw it onto comparable ball lock or pin lock couplers.

• System: D
• 1/4" MFL Fittings
• Black Lever Handle
• Nickel-plated Forged Brass Body
• Stainless Steel Probe
• NSF approved

Note: Beer Line requires a 1/4" Swivel Nut Set and Air Line requires a 3/8" Swivel Nut Set

WARNING: This product has Brass components. Brass alloys are known to contain trace amounts of Lead, which is known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.

If you want to be able to switch back and forth from domestic to home brew kegs, the KT85-MFL is the D System keg coupler for you! It has 1/4" MFL fittings for both the gas line and liquid line, so you don't have to worry about pulling a hose off of a hose nipple or removing clamps if you want to use a different type of coupler. Simply unscrew the nut from the fitting and screw it onto comparable ball lock or pin lock couplers.

• System: D
• 1/4" MFL Fittings
• Black Lever Handle
• Nickel-plated Forged Brass Body
• Stainless Steel Probe
• NSF approved

Note: Beer Line requires a 1/4" Swivel Nut Set and Air Line requires a 3/8" Swivel Nut Set